搜索

产品详情 全部 通信 终端和服务器 Telecommunication GP01-H60 In-Line Horizontal Fiber Optic Splice Closure The product is suitable for indoor and outdoor fiber optic cable overhead, wall, building and other straight-through connection, divergent connection, fiber optic splitting, etc., using a full silicone rubber mechanical seal and can be quickly and repeatedly open the way, can be installed inside the mini optical splitter, SC-type adapter into the end, the construction operation is convenient; mainly used in urban areas, towns, rural fiber optic broadband engineering network, an ideal splitting and splitting fiber splice box. Application Scenario Outdoor overhead, wall-mounted and other installations, suitable for use at the end of the fiber optic broadband network access network. Structure picture Performance characteristics 1、The shell is produced by injection molding process of high-quality engineering plastics, with anti-UV and anti-aging additives, high mechanical strength; 2、The box body adopts double-ended optical cable in and out design structure, convenient overhead hanging rod and other openable structure, screw-free box sealing design, quick and easy to repeat opening, no need to replace sealing materials; very convenient for maintenance inspection and other operations; 3、The box is designed with 8 SC/UPC end ports, and the lower side of the box is connected to the user's skin cable, which is reserved for the installation of mini optical splitter. Technical parameters or parameters table 1、Adapted to the ambient temperature: -40℃~+65℃. 2、Atmospheric pressure: 70~106Kpa. 3、voltage strength: 15KV (DC), 1min, no flying arc, no breakdown after the test; 4、Insulation resistance: >2*104 MΩ. 5、the maximum capacity of fiber optic fusion splicing: 24 cores; 6、the maximum number of fiber into the end: 8 cores, the maximum can be installed splitter: 1 * 8; 7、fiber radius of curvature > 30mm, fiber fusion tray additional attenuation ≤ 0.01dB. Commonly used tools for construction cross cutter, tape measure. 点击下载产品手册 相关产品 1/7 GP01-H63 In-Line Horizontal Fiber Optic Splice Closure 1/8 GP01-H61 In-Line Horizontal Fiber Optic Splice Closure 1/7 GP01-H55 In-Line Horizontal Fiber Optic Splice Closure 1/6 GP01-H54 In-Line Horizontal Fiber Optic Splice Closure

Product Details All Telecommunication Terminal and Server Electric 上一个产品 下一个产品 Outdoor Cabinets - Equipment Cabinets The equipment cabinet for base station is an outdoor equipment for communication base station to provide related hardware equipment installation, which can install communication integrated main equipment, communication transmission equipment, power supply equipment, ODF, dynamic loop monitoring, etc., and provide temperature control solutions, with safe and reliable, strong anti-theft performance, low noise, good heat dissipation, occupy little space, etc., which can help customers to achieve rapid site selection and rapid deployment, and greatly enhance the communication System platform upgrade support comprehensive service capacity. Product Benefits (1) Small and beautiful, compact housing (less than 0.8 m2/unit) (2) Modular design, with high reliability, simple maintenance, flexible combination according to the different needs of customers (3) Support multi-scene and multi-functional applications (rooftop stations, street stations, suburban stations, operator co-stations, etc (4) Made of high quality hot-dip galvanized sheet with flame retardant material (5) Good insulation effect (PU core not less than 45MM) (6) Low cost of site selection (7) Compatible with multi-vendor devices (8) Support cabinet expansion (9) Intelligent temperature control system (10) Can replace traditional server rooms Product Type Product use (1) Cabinet installation and fixing function: can install fixed IT equipment, servers and other equipment, the main fixing method is 19-inch rack installation, fixed on the U system column, the main frame of the cabinet and U system column design is convenient to install equipment, and the load-bearing capacity is relatively strong, so the cabinet can be installed in all standard equipment (2) Cabinet line management function: the cabinet has a variety of internal line management slot, line management frame, line management board and alignment channel, etc., to provide a very convenient wiring management for a variety of equipment installed inside the cabinet (3) Cabinet protection function: the cabinet is a relatively closed space, the cabinet door can be closed to the internal equipment to play a protective role to prevent damage from the outside, such as rats can be prevented from entering the cabinet inside the equipment or cable into the line damage (4) The cabinet can integrate UPS power supply, power distribution, refrigeration, access control, cabinet, lighting, fire protection, dynamic monitoring, emergency ventilation and other systems, through the monitoring system to complete the integrated management of all subsystems (5) Provide reliable temperature control and regulation system for the full and stable operation of communication transmission equipment (6) Provide reliable grounding protection system for communication transmission equipment and cabinets Product application tools Base station equipment cabinet can be fully applied to business outlets (telecommunications, finance, energy, radio and television, retail) small businesses, large enterprises, government, education, medical branches and networks between the edge of the data center, the use of tools need to be applied to: fusion machine, fiber optic cutting knife, fiber optic tester, pen red light source, optical power meter, dissecting pliers, diagonal pliers, screwdriver, the need to prepare the construction materials are: Anhydrous ethanol, adhesive tape, flexible plastic tape, fireproof mud, corrugated pipe, etc. Frequently Asked Questions Do you support non-standard product customization in addition to the above equipment sizes? Support, customers can put forward specific requirements according to their needs, the company supports non-standard customized products, the internal size of the product can be customized, 19/21 inches can be customized. What is the difference between a base station equipment cabinet and a traditional cabinet? The base station equipment cabinet will be a deep integration of data center infrastructure equipment products, including UPS, power distribution, refrigeration, cabinets, fire protection and other subsystems, through the monitoring system to complete the overall management of all systems, simplifying the design and establishment process, reliable UPS power distribution system, from time to time to protect the IT equipment, while configured with a precision cooling system to ensure normal operation of IT equipment, with dynamic loop monitoring The system monitors the working status of the equipment in real time. Base station equipment cabinets are fully sealed and can be used in a variety of harsh indoor environments, without the need to set up a separate room. What are the advantages of base station equipment cabinet? (1) Compared with the traditional server room, the base station equipment cabinet structure is simpler, factory pre-verification testing compared to on-site construction construction is more standardized, safe and reliable; fully sealed design to eliminate external air dust and corrosive gases on IT equipment; dynamic loop monitoring system to monitor the infrastructure in a comprehensive manner, timely warning of abnormal conditions, security and worry-free. (2) More time-saving and labor-saving construction of the site, the modular design of the product allows the site to be installed and delivered within a day, more than 2 times faster than the traditional construction mode. (3) smaller footprint, a single cabinet covers an area of only 0.6m2 minimum, closed design, strong environmental adaptability, no decoration, flooring and other supporting works, effectively reducing the cost of building the station, fully enclosed refrigeration to enhance the energy efficiency of the whole machine, so that the total cost of ownership significantly reduced. (4) better management, one-stop after-sales service can deal with all kinds of equipment failure problems in a timely manner, saving time and effort; standard with dynamic loop monitoring system, local, remote monitoring and management, more multi-network access to the upper management platform unified supervision, diversified options to support. (5) Integrated and integrated design, integrated cabinet integration of UPS power supply, power distribution, refrigeration, access control, cabinets, lighting, fire, dynamic monitoring, emergency ventilation and many other systems, through the monitoring system to achieve integrated management of all subsystems to create an integrated product, simplify the design, procurement and construction process. 上一个产品 下一个产品

Product Details All Telecommunication Terminal and Server Electric 上一个产品 下一个产品 Product Model:MJ-FBF401-DI Key selling points (1) Support telecom 4G network transmission (2) Can support solar or DC power (3) Built-in speakers, and can support external sound column (4) Human detection, sound and light alarm, regional intrusion alarm (5) Cloud storage support (6) Support two-way intercom (7) Waterproof and dustproof (8) Support human tracking, fixed speed cruise Each main parameter index 上一个产品 下一个产品

Product Details All Telecommunication Terminal and Server Electric 上一个产品 下一个产品 GJS03-M1AX-A8-24~96C(GP204) The product is suitable for outdoor optical cable overhead, pipeline and other straight-through splicing and divergence splicing, optical cable to meet the multi-divergence 2 into 8 out optical cable port management. The product has high strength mechanical performance, high sealing performance, strong corrosion resistance, excellent weather resistance, etc., can be mechanically repeated to open, high maintainability; reasonable structure layout, simple and quick construction operation. Application Scenario Outdoor overhead, pipeline, direct buried and other common fiber optic cable joint splicing, can be used for urban or urban and rural common fiber optic network splicing protection. Structure picture Performance characteristics 1、The shell is made of high-quality engineering plastic injection molding process, with anti-UV and anti-aging additives, high mechanical strength; 2、The box body adopts single-ended in and out of the optical cable design structure, easy to install overhead hanging rods and other barrels can be quickly opened for maintenance and repair; no tools are required to open the box body; 3、the shell and the bottom with silicone rubber sealing ring, optical cable mouth using temperature-resistant heat-shrinkable tube sealing, good airtightness; 4、Box with electrical disconnection or connection function, optional air nozzle; 5、compact size, more suitable in the pipeline or narrow space; 6、Multi-divergent structure design with 2-in and 8-out multi-optical cable management; 7、termite resistance, acid and alkali resistant oil, resistance to extreme cold and high temperature environment need to order separate instructions. Technical parameters or parameters table 1、Adapted to the ambient temperature: -40℃~+65℃. 2、Atmospheric pressure: 70~106Kpa. 3、Axial tension: 〉1000N/1min or more. 4、flattening: the box is filled with 40 ± 5kpa air pressure, should be able to withstand 2000N/100mm lateral uniform pressure, the force time is not less than 1min, after the test joint box does not leak, no deformation, no damage. 5、impact: fiber optic splice box should be able to withstand a drop height of 1m, the mass of the steel ball 1.6Kg, the number of impacts for 3 times the impact. 6、bending: fiber optic splice box and fiber optic cable joints should be able to withstand bending tension load of 150N, bending angle ± 45 ° of 10 cycles of bending. 7、torsion: fiber optic splice box should be able to withstand a torque of not less than 50N-m, torsion angle ± 90 °, a total of 10 cycles of twisting. 8、Drop: The fiber optic cable connector box should be able to withstand 3 drops at a height of 2.2m, and after the test, the connector box should not leak, no deformation, no damage. 9、 tensile strength: 〉2000N/10cm2 pressure, time 1min. 10、 vibration: splice box to withstand vibration frequency of 10Hz, amplitude of ± 3mm, the number of vibration for 106 vibration, the fiber additional loss change value does not exceed 0.2dB. 11、Temperature cycle: -40℃~+65℃, internal air pressure 40(+5)Kpa, 10 times cycle, air pressure drop not more than 5kpa after room temperature. 12、fiber radius of curvature > 30mm, fiber fusion tray additional attenuation ≤ 0.01dB. Commonly used tools for construction cross cutters, heaters or spray guns, sawyers, tape measures. Parameter table Model: GJS03-M1AX-A8-24~96C(GP204) Box material: PP Adapt to the diameter of fiber optic cable oval hole: 10-25mm; small hole: 6-11mm Number of cable entry ports: 2+8 Maximum capacity of fusion fiber tray (core): 24 Maximum number of fusion cores (cores): 96 Fiber optic residual fiber intake device: No Sealing method: mechanical + heat shrink seal Fiber into the end type and number: -- Product use environment: overhead, pipeline, buried 上一个产品 下一个产品

Product Details All Telecommunication Terminal and Server Electric 上一个产品 下一个产品 GJS03-M2AX-A8, SC-24 24~72C-D (GP253) The product is suitable for outdoor optical cable overhead, pipeline and other straight-through splicing and divergence splicing, optical cable to meet the multi-divergence 2 into 8 out optical cable port management. The product has high strength mechanical performance, high sealing performance, strong corrosion resistance, excellent weather resistance, etc., can be mechanically repeated to open, high maintainability; reasonable structure layout, simple and quick construction operation. Application Scenario Outdoor overhead, pipeline and other common fiber optic cable joint splicing, can be used for urban or urban and rural common fiber optic network splicing protection. Performance characteristics 1、The shell is made of high-quality engineering plastic injection molding process, with anti-UV and anti-aging additives, high mechanical strength; 2、The box body adopts single-ended in and out of the optical cable design structure, easy to install overhead hanging rods and other barrels can be quickly opened for maintenance and repair; no tools are required to open the box body; 3、the shell and the bottom with silicone rubber sealing ring, optical cable mouth using temperature-resistant heat-shrinkable tube sealing, good airtightness; 4、Box with electrical disconnection or connection function, optional air nozzle; 5、compact size, more suitable in the pipeline or narrow space; 6、Multi-divergent structure design with 2-in and 8-out multi-optical cable management; 7、termite resistance, acid and alkali resistant oil, resistance to extreme cold and high temperature environment need to order separate instructions. Technical parameters or parameters table 1、Adapted to the ambient temperature: -40℃~+65℃. 2、Atmospheric pressure: 70~106Kpa. 3、Axial tension: 〉1000N/1min or more. 4、flattening: the box is filled with 40 ± 5kpa air pressure, should be able to withstand 2000N/100mm lateral uniform pressure, the force time is not less than 1min, after the test joint box does not leak, no deformation, no damage. 5、 impact: fiber optic splice box should be able to withstand a drop height of 1m, the mass of the steel ball 1.6Kg, the number of impacts for 3 times the impact. 6、bending: fiber optic splice box and fiber optic cable joints should be able to withstand bending tension load of 150N, bending angle ± 45 ° of 10 cycles of bending. 7、torsion: fiber optic splice box should be able to withstand a torque of not less than 50N-m, torsion angle ± 90 °, a total of 10 cycles of twisting. 8、Drop: The fiber optic cable connector box should be able to withstand 3 drops at a height of 2.2m, and after the test, the connector box should not leak, no deformation, no damage. 9、tensile strength: 〉2000N/10cm2 pressure, time 1min. 10、vibration: splice box to withstand vibration frequency of 10Hz, amplitude of ± 3mm, the number of vibration for 106 vibration, the fiber additional loss change value does not exceed 0.2dB. 11、Temperature cycle: -40℃~+65℃, internal air pressure 40(+5)Kpa, 10 times cycle, air pressure drop not more than 5kpa after room temperature. 12、fiber radius of curvature > 30mm, fiber splice tray additional attenuation ≤ 0.01dB. Commonly used tools for construction cross cutters, heaters or spray guns, sawyers, tape measures. Parameter table Model: GJS03-M1AX-144C(GP200) Box material: PP Adapt to the diameter of fiber optic cable: oval hole: 10-25mm; small hole: 6-25mm Number of cable entry ports: 2+4 Maximum capacity of fusion fiber tray (core): 24 Maximum number of fusion cores (cores): 144 Fiber optic residual fiber intake device: No Sealing method: mechanical + heat shrink seal Fiber into the end type and number: -- Product use environment: overhead, pipeline, buried 上一个产品 下一个产品

Product Details All Telecommunication Terminal and Server Electric 上一个产品 下一个产品 GJS03-M4AX-AL-12-672C(GP321) The product is suitable for outdoor large-capacity fiber optic cable overhead, pipeline and other straight-through splicing and divergent splicing, the product has high strength mechanical properties, high sealing performance, strong corrosion resistance, excellent weather resistance, etc., can be mechanically repeated to open, high maintainability; reasonable structure layout, simple and quick construction operation. Application Scenario Outdoor overhead, pipeline, direct buried and other common fiber optic cable joint splicing, can be used for urban or urban and rural common fiber optic network splicing protection. Structure picture Performance characteristics 1、The shell is made of high-quality engineering plastic injection molding process, with anti-UV and anti-aging additives, high mechanical strength; 2、The box body adopts single-ended in and out of the optical cable design structure, easy to install overhead hanging rods and other barrels can be quickly opened for maintenance and repair; no tools are required to open the box body; 3、the shell and the bottom with silicone rubber sealing ring, optical cable mouth using temperature-resistant heat-shrinkable tube sealing, good airtightness; 4、Box with electrical disconnection or connection function, optional air nozzle; 5、compact size, more suitable in the pipeline or narrow space; 6、Anti-termites, acid and alkali resistant oil, resistance to extreme cold and high temperature environments need to be specified separately in the order. Technical parameters or parameters table 1、Adapted to the ambient temperature: -40℃~+65℃. 2、Atmospheric pressure: 70~106Kpa. 3、Axial tension: 〉1000N/1min or more. 4、flattening: the box is filled with 40 ± 5kpa air pressure, should be able to withstand 2000N/100mm lateral uniform pressure, the force time is not less than 1min, after the test joint box does not leak, no deformation, no damage. 5、 impact: fiber optic splice box should be able to withstand a drop height of 1m, the mass of the steel ball 1.6Kg, the number of impacts for 3 times the impact. 6、bending: fiber optic splice box and fiber optic cable joints should be able to withstand bending tension load of 150N, bending angle ± 45 ° of 10 cycles of bending. 7、torsion: fiber optic splice box should be able to withstand a torque of not less than 50N-m, torsion angle ± 90 °, a total of 10 cycles of twisting. 8、Drop: The fiber optic cable connector box should be able to withstand 3 drops at a height of 2.2m, and after the test, the connector box should not leak, no deformation, no damage. 9、tensile strength: 〉2000N/10cm2 pressure, time 1min. 10、vibration: splice box to withstand vibration frequency of 10Hz, amplitude of ± 3mm, the number of vibration for 106 vibration, the fiber additional loss change value does not exceed 0.2dB. 11、Temperature cycle: -40℃~+65℃, internal air pressure 40(+5)Kpa, 10 times cycle, air pressure drop not more than 5kpa after room temperature. 12、fiber radius of curvature > 30mm, fiber splice tray additional attenuation ≤ 0.01dB. Commonly used tools for construction cross cutters, heaters or spray guns, sawyers, tape measures. Parameter table Model: GJS03-M4AX-AL-12-672C(GP321) Box material: PP Adapt to the diameter of fiber optic cable: oval hole: 10-25mm; small hole: 8-30mm Number of cable entry ports: 2+16 Maximum capacity of fusion fiber tray (core): 12 Maximum number of fusion cores (cores): 672 Fiber optic residual fiber intake device: Yes Sealing method: mechanical + heat shrink seal Fiber into the end type and the number of - Product use environment: overhead, pipeline, buried 上一个产品 下一个产品

Product Details All Telecommunication Terminal and Server Electric 上一个产品 下一个产品 GJS03-M3AX-24~288C-TZJ07-III-N15(GP286) The product is suitable for outdoor fiber optic cable overhead, pipeline and other straight-through splicing and divergent splicing, the product has high strength mechanical properties, high sealing performance, strong corrosion resistance, excellent weather resistance, etc., can be mechanically repeated to open, high maintainability; reasonable structure layout, simple and quick construction operation. Application Scenario Outdoor overhead, pipeline, direct buried and other common fiber optic cable joint splicing, can be used for urban or urban and rural common fiber optic network splicing protection. Structure picture Performance characteristics 1、The shell is made of high-quality engineering plastic injection molding process, with anti-UV and anti-aging additives, high mechanical strength; 2、The box body adopts single-ended in and out of the optical cable design structure, easy to install overhead hanging rods and other barrels can be quickly opened for maintenance and repair; no tools are required to open the box body; 3、the shell and the bottom with silicone rubber sealing ring, optical cable mouth using temperature-resistant heat-shrinkable tube sealing, good airtightness; 4、Box with electrical disconnection or connection function, optional air nozzle; 5、compact size, more suitable in the pipeline or narrow space; 6、Anti-termites, acid and alkali resistant oil, resistance to extreme cold and high temperature environments need to be specified separately in the order. Technical parameters or parameters table 1、Adapted to the ambient temperature: -40℃~+65℃. 2、Atmospheric pressure: 70~106Kpa. 3、Axial tension: 〉1000N/1min or more. 4、flattening: the box is filled with 40 ± 5kpa air pressure, should be able to withstand 2000N/100mm lateral uniform pressure, the force time is not less than 1min, after the test joint box does not leak, no deformation, no damage. 5、 impact: fiber optic splice box should be able to withstand a drop height of 1m, the mass of the steel ball 1.6Kg, the number of impacts for 3 times the impact. 6、bending: fiber optic splice box and fiber optic cable joints should be able to withstand bending tension load of 150N, bending angle ± 45 ° of 10 cycles of bending. 7、torsion: fiber optic splice box should be able to withstand a torque of not less than 50N-m, torsion angle ± 90 °, a total of 10 cycles of twisting. 8、Drop: The fiber optic cable connector box should be able to withstand 3 drops at a height of 2.2m, and after the test, the connector box should not leak, no deformation, no damage. 9、tensile strength: 〉2000N/10cm2 pressure, time 1min. 10、vibration: splice box to withstand vibration frequency of 10Hz, amplitude of ± 3mm, the number of vibration for 106 vibration, the fiber additional loss change value does not exceed 0.2dB. 11、Temperature cycle: -40℃~+65℃, internal air pressure 40(+5)Kpa, 10 times cycle, air pressure drop not more than 5kpa after room temperature. 12、fiber radius of curvature > 30mm, fiber splice tray additional attenuation ≤ 0.01dB. Commonly used tools for construction cross cutters, heaters or spray guns, sawyers, tape measures. Parameter table Model: GJS03-M1AX-144C(GP200) Box material: PP Adapt to the diameter of fiber optic cable: oval hole: 10-25mm; small hole: 6-25mm Number of cable entry ports: 2+4 Maximum capacity of fusion fiber tray (core): 24 Maximum number of fusion cores (cores): 144 Fiber optic residual fiber intake device: No Sealing method: mechanical + heat shrink seal Fiber into the end type and number: -- Product use environment: overhead, pipeline, buried 上一个产品 下一个产品

产品详情 全部 通信 终端和服务器 通信 GP01-H55 卧式光缆接头盒 该产品适用于室外光缆架空直通接续和分歧接续。采用双端卧式免螺钉紧固小尺寸设计结构， 本产品具有高密封性能、耐腐蚀性强、耐候性优异等特点，多光缆端口管理，盒体及光缆口均采用硅橡胶密封结构设计，重复开启盒体等操作简单快捷且无须更换密封材料；结构布局合理，施工操作简单快捷。 应用场景 室外架空、管道等普通光缆接头接续，可用于城区或城乡普通光纤网络接续保护。 结构图 性能特点 1、壳体采用优质工程塑料注塑工艺生产、添加有抗紫外线、耐老化助剂，机械强度高； 2、盒体采用双端进出光缆设计结构、便于架空挂杆等可开启式结构，免螺钉盒体密封设计，重复开启快捷方便，无须更换密封材料；对维护检查等操作非常便捷； 3、盒体盒盖及光缆口均采用硅橡胶密封结构，气密性良好； 4、盒体具备电气断开或连通功能，可选配气嘴。 技术参数 1、适应环境温度：-40℃~+65℃。 2、大气压力：70~106Kpa。 3、轴向拉力：〉1000N/1min以上。 4、冲击：光缆接头盒应能承受落高1m、钢球质量1.6Kg，冲击次数为3次的冲击。 5、跌落：光缆接头盒应能承受1m高度3次的跌落，试验后接头盒不变形、无破损、内部结构无脱落。 6、震动：接头盒承受振动频率为10Hz、振幅为±3mm、振动次数为106的振动，其光纤附加损耗变化值不超过0.2dB; 7、耐电压强度：15KV(DC),1min，试验后无飞弧、不击穿； 8、绝缘电阻：>2*104MΩ; 9、光纤曲率半径>30mm,光纤熔接盘附加衰耗≤0.01dB； 10、盒体最大接续容量：96芯。 施工常用工具 十字改刀、卷尺。 点击下载产品手册 相关产品 1/7 GP01-H63 卧式光缆接头盒 1/8 GP01-H61 卧式光缆接头盒 1/7 GP01-H60 卧式光缆接头盒 1/6 GP01-H54 卧式光缆接头盒

产品详情 全部 通信 终端和服务器 钣金 综合机柜 钣金 综合机柜又称综合集装架，可将光纤单元、数字单元，音频配线模块等各种单元体集装于一体，可按需要进行多种组合，灵活多变，能满足各种不同的需求，使电路、光路的配线、调线与转业务变更为方便、灵活。 综合集装架中可安装SDH设备单元、ODF单元、DDF单元、MDF模块。用于集成型的基站传输网中，可以优化光纤和电缆走线，节约机房空间和工程投资。 产品优点 (1) 兼容性：标准U和标准19英寸安装尺寸设计，适应能力强，能安装各种设备; (2) 结构牢固：高强度钣金柜体，整体焊接结构，牢固可靠,表面喷塑处理; (3) 走线便利: 可以上下进线，两侧可以走线，根据需要可配置垂直和水平管理线环，光缆的固定有专门固定装置，装配于机柜的后面； (4) 优良通风率：可选后双开门网孔结构，通风率达80%; (5) 可扩展性：可拆卸的侧板设计，方便并架扩容; (6) 装配便利：整装或现场拼装，安装快捷高效，站点快速覆盖； (7) 标准化：采用国际化标准安装尺寸，封闭式结构，通用、安全性强； (8) 定制化：根据客户需求可定制。 产品类型 机架高度主要为1200mm、1600mm、1800mm、2000mm、2200mm几个规格，宽度推荐尺寸为：600mm、800mm，深度推荐尺寸为：450mm、600mm、800mm；以下表格主要列出高度为2000mm、2200mm机柜的规格，其余可按需求定制化选择。 产品用途 (1) 通过智能综合机柜的使用，实现对室外前端市电、通讯链路的检测，温湿度、浸水、开关门等动环检测，外部设备供电及电流/电压检测、外设业务通讯接口的检测等； (2) 建立多机柜组合使用，通过平台对中心的核心交换设备、核心路由设备、存储设备、服务器、数据库以及关键应用进行检测。 产品应用工具 打线刀、开口扳手、启子、熔接机 本产品因为是有源和无源结合标准机柜，可以配置的设备非常广泛，可以实现的功能也非常繁多，在使用到音频模块的时候需要打线刀，在使用ODF模块的时候需要用到熔接机进行光纤熔合，其它普通设备安装的过程中使用启子即可，有铜排接线的场合需要用到16-19的开口扳手进行操作。 常见问题解答 机架怎么选择？ 对于用于安装设备和接插面板的开放式机架和封闭式机柜，数据中心用户有很多种选择，每一种都有其优点和缺点。与电缆通道一样，这也没有通用的解决方案。关于宽度，服务器、交换机和接插面板的规格为19 〃 ；引入室中的载波设备和其它宽度更大的设备的适用规格为23 〃 。最佳高度为7 〃 ，最大允许高度为8 〃 。 电缆怎么管理？ 可以为宽敞、方便进入的竖直线缆管理器轻松配备机架。很多机柜没有足够的空间来容纳竖直线缆管理器。通常，仅有的空间就是狭窄、竖直的转角处和相邻机柜间的空隙，而这两种地方都不容易进入。电缆入口孔，电缆管理器横截面积都需经过计算给出。无论机柜中是否安装了配线架，都应该在导轨和门之间留出最少100mm（4 〃 ）的高度，以便安装线缆管理器。 综合机柜选择时需注意什么？ (1) 尺寸：综合机柜的尺寸需要根据使用场景、数量和服务器规格来确定。如果购买的机柜太大或太小，容易造成计算机房空间利用率的浪费或者无法容纳设备。 (2) 承重：综合机柜需要承载产品密度越来越答，因此需要满足一定的承重能力。一般而言，多台式网络机柜的承重能力在500KG以上。 (3) 防护性能：综合机柜通常都采用钢铁材质制造，但在防护能力、漏电保护等方面仍有差别。如果在地震、火灾等灾害条件下能够确保其设备免受损坏，就有更多的优势。 (4) 热量排放：综合网络机柜内的设备工作时会产生大量热量，需要考虑机柜的散热能力，保证机柜内设备稳定运行。同时，也可以选用带风扇机柜，可以保证设备的冷却效果。 (5) 管理性能：综合机柜需配备相应的管理系统，进行远程和本地管理。用户可以通过网络或终端接口，对机柜内部的设备进行调查、监控和管理。 点击下载产品手册 相关产品 1/16 绝缘耐压固定装置（金具） 钣金 1/14 光缆终端盒 钣金 1/2 移动智慧厕所 钣金 1/1 一体化熔纤盘 钣金

产品详情 全部 通信 终端和服务器 Telecommunication M5AX-JX-AL-SC(48)-12~144C(GP304) Dome Fiber Optic Splice Closure, M 5 The product is suitable for outdoor large-capacity fiber optic cable overhead, pipeline and other straight-through splicing and divergent splicing, the product has high strength mechanical properties, high sealing performance, strong corrosion resistance, excellent weather resistance, etc., can be mechanically repeated to open, high maintainability; reasonable structure layout, simple and fast construction operation. Application Scenario Outdoor overhead, pipeline and other common fiber optic cable splice splicing, can be used for urban or urban and rural common fiber optic network splicing protection. Performance characteristics 1、The shell is made of high-quality engineering plastic injection molding process, with anti-UV and anti-aging additives, high mechanical strength; 2、The box body adopts the single end in and out of the optical cable design structure, easy to install overhead hanging rods and other barrels can be quickly opened for maintenance and repair; open the box body without tools; 3、the shell and the bottom with silicone rubber sealing ring, optical cable mouth using temperature-resistant heat-shrinkable tube sealing, good airtightness; 4、Box with electrical disconnection or connection function, optional air nozzle; 5、high-capacity splicing, to meet the trunk or special fiber optic cable splicing protection; 6、with fiber into the end of the patch function; 7、termite resistance, acid and alkali resistant oil, resistance to extreme cold and high temperature environment need to order separate instructions. Technical parameters or parameters table 1、Adapted to the ambient temperature: -40℃~+65℃. 2、Atmospheric pressure: 70~106Kpa. 3、Axial tension: 〉1000N/1min or more. 4、flattening: the box is filled with 40 ± 5kpa air pressure, should be able to withstand 2000N/100mm lateral uniform pressure, the force time is not less than 1min, after the test joint box does not leak, no deformation, no damage. 5、 impact: fiber optic splice box should be able to withstand a drop height of 1m, the mass of the steel ball 1.6Kg, the number of impacts for 3 times the impact. 6、bending: fiber optic splice box and fiber optic cable joints should be able to withstand bending tension load of 150N, bending angle ± 45 ° of 10 cycles of bending. 7、torsion: fiber optic splice box should be able to withstand a torque of not less than 50N-m, torsion angle ± 90 °, a total of 10 cycles of twisting. 8、Drop: The fiber optic cable connector box should be able to withstand 3 drops at a height of 2.2m, and after the test, the connector box should not leak, no deformation, no damage. 9、tensile strength: 〉2000N/10cm2 pressure, time 1min. 10、vibration: splice box to withstand vibration frequency of 10Hz, amplitude of ± 3mm, the number of vibration for 106 vibration, the fiber additional loss change value does not exceed 0.2dB. 11、Temperature cycle: -40℃~+65℃, internal air pressure 40(+5)Kpa, 10 times cycle, air pressure drop not more than 5kpa after room temperature. 12、fiber radius of curvature > 30mm, fiber splice tray additional attenuation ≤ 0.01dB. Commonly used tools for construction cross cutters, heaters or spray guns, sawyers, tape measures. Parameter table Model: GJS03-M4AX-AL-12-672C(GP321) Box material: PP Adapt to the diameter of fiber optic cable: oval hole: 10-25mm; small hole: 8-30mm Number of cable entry ports: 2+16 Maximum capacity of fusion fiber tray (core): 12 Maximum number of fusion cores (cores): 672 Fiber optic residual fiber intake device: Yes Sealing method: mechanical + heat shrink seal Fiber into the end type and the number of - Product use environment: overhead, pipeline, buried 点击下载产品手册 相关产品 1/6 M5AX-RS-AL-SC(48) 12~144C(GP220) Dome Fiber Optic Splice Closure, M 5 1/4 GJS03-M5AX-JX-AL-288C(GP304) Dome Fiber Optic Splice Closure, M 5 1/4 GJS03-M5AX-RS-AL-288C(GP304) Dome Fiber Optic Splice Closure, M 5