搜索

产品详情 全部 通信 终端和服务器 通信 GP01-H32 卧式光缆接头盒 产品适用于室内外光缆架空、挂墙、楼道等直通接续、分歧接续、光纤分光等，采用全硅橡胶机械密封和可快捷重复开启方式，可选装微型光分路器、盒式光分路器及插片式光分路器、免螺钉盒体密封结构，开盖和密封操作简单快捷、施工操作方便；主要用于城区、城镇、乡村光纤宽带工程网络，一款理想的分光分纤接续盒。 应用场景 室外架空、挂墙等安装、适用于光纤宽带网络接入网末端使用。 结构图 性能特点 1、壳体采用优质工程塑料注塑工艺生产、添加有抗紫外线、耐老化助剂，机械强度高； 2、盒体采用双端进出光缆设计结构、便于架空挂杆等可开启式结构，免螺钉盒体密封设计，重复开启快捷方便，无须更换密封材料；对维护检查等操作非常便捷； 3、盒体设计有SC/UPC成端端口16个，盒体两侧出用户皮线光缆，预留可安装微分或插片式光分路器。 技术参数 1、适应环境温度：-40℃~+65℃。 2、大气压力：70~106Kpa。 3、耐电压强度：15KV(DC),1min，试验后无飞弧、不击穿； 4、绝缘电阻：>2*104MΩ; 5、光纤熔接最大容量：48芯； 6、光纤成端最大数：16芯，最大可安装分光器：1*16； 7、光纤曲率半径>30mm,光纤熔接盘附加衰耗≤0.01dB。 施工常用工具 十字改刀、卷尺。 点击下载产品手册 相关产品 主图1.jpg 主图2.jpg 主图7.jpg 主图1.jpg 1/7 卧式光缆接头盒 GP01-H63 主图1.jpg 主图2.jpg 主图8.jpg 主图1.jpg 1/8 卧式光缆接头盒 GP01-H61 主图1.jpg 主图2.jpg 主图7jpg.jpg 主图1.jpg 1/7 卧式光缆接头盒 GP01-H60 主图1.jpg 主图2.jpg 主图7.jpg 主图1.jpg 1/7 卧式光缆接头盒 GP01-H55

产品详情 全部 通信 终端和服务器 Telecommunication GJS03-M1AX-24-96C-N08 (GP227) Dome Fiber Optic Splice Closure, M 1 The product is suitable for outdoor optical cable overhead, pipeline and other straight-through splicing and divergence splicing. The product has the characteristics of high strength mechanical performance, high sealing performance, strong corrosion resistance, excellent weather resistance, etc. It can be mechanically repeatedly opened, high maintainability; reasonable structure layout, simple and quick construction operation. Application Scenario Outdoor overhead, pipeline, direct buried and other common fiber optic cable joint splicing, can be used for urban or urban and rural common fiber optic network splicing protection. Performance characteristics 1、The shell is made of high-quality engineering plastic injection molding process, with anti-UV and anti-aging additives, high mechanical strength; 2、The box body adopts single-ended in and out of the optical cable design structure, easy to install overhead hanging rods and other barrels can be quickly opened for maintenance and repair; no tools are required to open the box body; 3, the shell and the bottom with silicone rubber sealing ring, optical cable mouth using temperature-resistant heat-shrinkable tube sealing, good airtightness; 4、Box with electrical disconnection or connection function, optional air nozzle; 5, compact size, more suitable in the pipeline or narrow space; 6、Anti-termites, acid and alkali resistant oil, resistance to extreme cold and high temperature environments need to be specified separately in the order. Technical parameters or parameters table 1、Adapted to the ambient temperature: -40℃~+65℃. 2、Atmospheric pressure: 70~106Kpa. 3、Axial tension: 〉1000N/1min or more. 4, flattening: the box is filled with 40 ± 5kpa air pressure, should be able to withstand 2000N/100mm lateral uniform pressure, the force time is not less than 1min, after the test joint box does not leak, no deformation, no damage. 5, impact: fiber optic splice box should be able to withstand a drop height of 1m, the mass of the steel ball 1.6Kg, the number of impacts for 3 times the impact. 6, bending: fiber optic splice box and fiber optic cable joints should be able to withstand bending tension load of 150N, bending angle ± 45 ° of 10 cycles of bending. 7, torsion: fiber optic splice box should be able to withstand a torque of not less than 50N-m, torsion angle ± 90 °, a total of 10 cycles of twisting. 8、Drop: The fiber optic cable connector box should be able to withstand 3 drops at a height of 2.2m, and after the test, the connector box should not leak, no deformation, no damage. 9, tensile strength: 〉2000N/10cm2 pressure, time 1min. 10, vibration: splice box to withstand vibration frequency of 10Hz, amplitude of ± 3mm, the number of vibration for 106 vibration, the fiber additional loss change value does not exceed 0.2dB. 11、Temperature cycle: -40℃~+65℃, internal air pressure 40(+5)Kpa, 10 times cycle, air pressure drop not more than 5kpa after room temperature. 12, fiber radius of curvature > 30mm, fiber fusion tray additional attenuation ≤ 0.01dB. Commonly used tools for construction cross cutters, heaters or spray guns, sawyers, tape measures. Parameter table Model: GJS03-M1AX-144C(GP200) Box material: PP Adapt to the diameter of fiber optic cable: oval hole: 10-25mm; small hole: 6-25mm Number of cable entry ports: 2+4 Maximum capacity of fusion fiber tray (core): 24 Maximum number of fusion cores (cores): 144 Fiber optic residual fiber intake device: No Sealing method: mechanical + heat shrink seal Fiber into the end type and number: -- Product use environment: overhead, pipeline, buried 点击下载产品手册 相关产品 主图1.jpg 主图2.jpg 主图3.jpg 主图1.jpg 1/3 Dome Fiber Optic Splice Closure, M 1 GJS03-M1AX-A8-144C-W30(GP1416) 主图1.jpg 主图2.jpg 主图3.jpg 主图1.jpg 1/3 Dome Fiber Optic Splice Closure, M 1 GJS03-M1AX-A8,SC-24 24-72C-D(GP297) 主图1.jpg 主图2.jpg 主图3.jpg 主图1.jpg 1/3 Dome Fiber Optic Splice Closure, M 1 GJS03-M1AX-A8-24-96C-N08(GP218) 主图1.jpg 主图2.jpg 主图4.jpg 主图1.jpg 1/4 Dome Fiber Optic Splice Closure, M 1 GJS03-M1AX-A8-24~96C(GP204)

产品详情 全部 通信 终端和服务器 Telecommunication GP01-H41 In-Line Horizontal Fiber Optic Splice Closure The product is suitable for outdoor optical cable overhead, pipeline and other straight-through connection and divergence and other trunk optical cable and common optical cable network connection. The use of double-ended horizontal screw-free box sealing design structure, the product has high strength mechanical properties, high sealing performance, corrosion resistance, excellent weather resistance, etc., multi-cable port management, can be mechanically repeated to open; reasonable structure layout, construction operation is simple and fast. Application Scenario Outdoor overhead, pipeline and other common fiber optic cable splice splicing, can be used for metropolitan area network backbone, urban or urban and rural common fiber optic network splicing protection. Structure picture Performance characteristics 1、The shell is made of high-quality engineering plastic injection molding process, with anti-UV and anti-aging additives, high mechanical strength; 2、The box body adopts double-ended optical cable in and out design structure, convenient overhead hanging rod and other openable structure, screw-free box sealing design, quick and easy to repeat opening, no need to replace sealing materials; very convenient for maintenance inspection and other operations; 3、the box body box cover and optical cable mouth are silicon rubber sealing structure, good airtightness; 4、Box with electrical disconnection or connection function, optional air nozzle; 5、high-capacity splicing, to meet the trunk or special fiber optic cable splicing protection; 7、termite resistance, acid and alkali resistant oil, resistance to extreme cold and high temperature environment need to order separate instructions. Technical parameters or parameters table 1、Adapted to the ambient temperature: -40℃~+65℃. 2、Atmospheric pressure: 70~106Kpa. 3、Axial tension: 〉1000N/1min or more. 4、flattening: the box is filled with 60 ± 5kpa air pressure, should be able to withstand 2000N/100mm lateral uniform pressure, the force time is not less than 1min, after the test joint box does not leak, no deformation, no damage. 5、impact: fiber optic splice box should be able to withstand a drop height of 1m, the mass of the steel ball 1.6Kg, the number of impacts for 3 times the impact. 6、bending: fiber optic splice box and fiber optic cable joints should be able to withstand bending tension load of 150N, bending angle ± 45 ° of 10 cycles of bending. 7、torsion: fiber optic splice box should be able to withstand a torque of not less than 50N-m, torsion angle ± 90 °, a total of 10 cycles of twisting. 8、Drop: The fiber optic cable connector box should be able to withstand 3 drops at a height of 2.2m, and after the test, the connector box should not leak, no deformation, no damage. 9、tensile strength: 〉2000N/10cm2 pressure, time 1min. 10、vibration: splice box to withstand vibration frequency of 10Hz, amplitude of ± 3mm, the number of vibration for 106 vibration, the fiber additional loss change value does not exceed 0.2dB. 11、Temperature cycle: -40℃~+65℃, internal air pressure 60(+5)Kpa, 10 times cycle, air pressure drop not more than 5kpa after room temperature. 12、fiber radius of curvature > 37.5mm, fiber fusion tray additional attenuation ≤ 0.01dB. Commonly used tools for construction cross cutter, tape measure. 点击下载产品手册 相关产品 主图1.jpg 主图2.jpg 主图7.jpg 主图1.jpg 1/7 In-Line Horizontal Fiber Optic Splice Closure GP01-H63 主图1.jpg 主图2.jpg 主图8.jpg 主图1.jpg 1/8 In-Line Horizontal Fiber Optic Splice Closure GP01-H61 主图1.jpg 主图2.jpg 主图7jpg.jpg 主图1.jpg 1/7 In-Line Horizontal Fiber Optic Splice Closure GP01-H60 主图1.jpg 主图2.jpg 主图7.jpg 主图1.jpg 1/7 In-Line Horizontal Fiber Optic Splice Closure GP01-H55

产品详情 全部 通信 终端和服务器 通信 GJS03-M11AX-4/16-24~96C(GP341) 帽式光缆接头盒, M11-14 该产品适用于室外光缆分纤分光的光纤入户工程。 本产品具有高强度机械性能、高密封性能、耐腐蚀性强、耐候性优异等特点，可机械重复开启，可维护性高；结构布局合理，施工操作简单快捷。 应用场景 室外架空、挂墙等安装、适用于光纤宽带网络接入网末端使用。 结构图 性能特点： 1、壳体采用优质工程塑料注塑工艺生产、添加有抗紫外线、耐老化助剂，机械强度高； 2、盒体采用单端进出光缆设计结构、便于架空挂杆等安装且筒体可快速开启进行检修和维护；开启盒体无须工具； 3、壳体与底部采用硅橡胶密封圈。 技术参数 1、适应环境温度：-40℃~+65℃。 2、大气压力：70~106Kpa。 3、光纤曲率半径>37.5mm,光纤熔接盘附加衰耗≤0.01dB； 4、具备光纤成端及熔接；可带微型光分路器最大1:16。 施工常用工具 十字改刀、卷尺。 参数表 型号：GJS03-M11AX-4/16-24~96C(GP341) 盒体材质：PP 适应光缆直径：椭圆孔：10-20mm；小孔：皮线 光缆入缆口数：2+16 熔纤盘最大容量(芯）：24 最大熔接芯数(芯）：96 光纤余纤收容装置：否 密封方式：机械 光纤成端类型及数量：SC/16(可配微型光分路器） 产品使用环境：架空、管道、地埋 点击下载产品手册 相关产品 主图1.jpg 主图2.jpg 主图5.jpg 主图1.jpg 1/5 帽式光缆接头盒, M11-14 GJS03-M15BX-A14-144C-NABS02（GP394） 主图1.jpg 主图2.jpg 主图6.jpg 主图1.jpg 1/6 帽式光缆接头盒, M11-14 GJS03-M15BX-A14-144C（GP394） 主图1.jpg 主图2.jpg 主图4.jpg 主图1.jpg 1/4 帽式光缆接头盒, M11-14 GJS03-M15AX-A14-144C-NABS02（GP394） 主图1.jpg 主图2.jpg 主图4.jpg 主图1.jpg 1/4 帽式光缆接头盒, M11-14 GJS03-M15AX-A14-144C（GP394）

产品详情 全部 通信 终端和服务器 Telecommunication GJS03-M2AX-A8-24~96C-W21(GP1402) Dome Fiber Optic Splice Closure, M 2 The product is suitable for outdoor optical cable overhead, pipeline and other straight-through splicing and divergence splicing, optical cable to meet the multi-divergence 2 into 8 out optical cable port management. The product has high strength mechanical performance, high sealing performance, strong corrosion resistance, excellent weather resistance, etc., can be mechanically repeated to open, high maintainability; reasonable structure layout, simple and quick construction operation. Application Scenario Outdoor overhead, pipeline and other common fiber optic cable joint splicing, can be used for urban or urban and rural common fiber optic network splicing protection. Performance characteristics 1、The shell is made of high-quality engineering plastic injection molding process, with anti-UV and anti-aging additives, high mechanical strength; 2、The box body adopts single-ended in and out of the optical cable design structure, easy to install overhead hanging rods and other barrels can be quickly opened for maintenance and repair; no tools are required to open the box body; 3、the shell and the bottom with silicone rubber sealing ring, optical cable mouth using temperature-resistant heat-shrinkable tube sealing, good airtightness; 4、Box with electrical disconnection or connection function, optional air nozzle; 5、compact size, more suitable in the pipeline or narrow space; 6、Multi-divergent structure design with 2-in and 8-out multi-optical cable management; 7、termite resistance, acid and alkali resistant oil, resistance to extreme cold and high temperature environment need to order separate instructions. Technical parameters or parameters table 1、Adapted to the ambient temperature: -40℃~+65℃. 2、Atmospheric pressure: 70~106Kpa. 3、Axial tension: 〉1000N/1min or more. 4、flattening: the box is filled with 40 ± 5kpa air pressure, should be able to withstand 2000N/100mm lateral uniform pressure, the force time is not less than 1min, after the test joint box does not leak, no deformation, no damage. 5、 impact: fiber optic splice box should be able to withstand a drop height of 1m, the mass of the steel ball 1.6Kg, the number of impacts for 3 times the impact. 6、bending: fiber optic splice box and fiber optic cable joints should be able to withstand bending tension load of 150N, bending angle ± 45 ° of 10 cycles of bending. 7、torsion: fiber optic splice box should be able to withstand a torque of not less than 50N-m, torsion angle ± 90 °, a total of 10 cycles of twisting. 8、Drop: The fiber optic cable connector box should be able to withstand 3 drops at a height of 2.2m, and after the test, the connector box should not leak, no deformation, no damage. 9、tensile strength: 〉2000N/10cm2 pressure, time 1min. 10、vibration: splice box to withstand vibration frequency of 10Hz, amplitude of ± 3mm, the number of vibration for 106 vibration, the fiber additional loss change value does not exceed 0.2dB. 11、Temperature cycle: -40℃~+65℃, internal air pressure 40(+5)Kpa, 10 times cycle, air pressure drop not more than 5kpa after room temperature. 12、fiber radius of curvature > 30mm, fiber splice tray additional attenuation ≤ 0.01dB. Commonly used tools for construction cross cutters, heaters or spray guns, sawyers, tape measures. Parameter table Model: GJS03-M1AX-144C(GP200) Box material: PP Adapt to the diameter of fiber optic cable: oval hole: 10-25mm; small hole: 6-25mm Number of cable entry ports: 2+4 Maximum capacity of fusion fiber tray (core): 24 Maximum number of fusion cores (cores): 144 Fiber optic residual fiber intake device: No Sealing method: mechanical + heat shrink seal Fiber into the end type and number: -- Product use environment: overhead, pipeline, buried 点击下载产品手册 相关产品 主图1.jpg 主图2.jpg 主图4.jpg 主图1.jpg 1/4 Dome Fiber Optic Splice Closure, M 2 GJS03-M2AX-A8-144C (GP1418) 主图1.jpg 主图2.jpg 主图4.jpg 主图1.jpg 1/4 Dome Fiber Optic Splice Closure, M 2 GJS03-M2AX-A8, SC-24 24~72C-D (GP253) 主图1.jpg 主图2.jpg 主图3.jpg 主图1.jpg 1/3 Dome Fiber Optic Splice Closure, M 2 GJS03-M2AX-A8-24~96C-N08(GP241) 主图1.jpg 主图2.jpg 主图4.jpg 主图1.jpg 1/4 Dome Fiber Optic Splice Closure, M 2 GJS03-M2AX-A8-24~96C(GP206)

产品详情 全部 通信 终端和服务器 Telecommunication Pressure-resistant fixtures (hardware fittings) Sheet Metal Self-supporting fiber optic cable pressure fixed device, also known as self-supporting cable fixture, is our company's independent research and development of fiber optic cable overhead construction, it is often used in the construction of the end of rural fiber optic cable lines, due to the overhead laying of fiber optic cable construction environment across the country is different and complex, so our company gives a complete set of end of the cable construction program, which contains a variety of models of fiber optic cable fixture, self-supporting cable fixture helps the construction side to shorten the construction period The self-supporting cable fittings can help builders shorten the construction period and save the total project investment. Self-supporting cable fittings are suitable for fixing non-metallic self-supporting fiber optic cables on fiber optic cable poles or shared power poles. It adopts full mechanical reinforcement connection and repeatable loading and unloading method, with simple structure, convenient operation, shorten the construction period and other characteristics. It is a reliable choice of fixing device for fiber optic cable network pole construction. Self-supporting cable fittings are suitable for non-metallic self-supporting center bundle tube outdoor fiber optic cable, the product model is GYFXTC8F. Product Benefits (1) The hoop and steel arm are made of Q235A flat steel covered with anti-corrosion and high-voltage insulating heat-shrinkable material, withstanding voltage up to 10KV, no flying arc, no breakdown; meet all the power poles and communication poles. (2) Fiber optic cable clamps are injection molded with special plastic with anti-aging agent and anti-UV radiation material, with high anti-aging and anti-UV capability and long service life; (3) So the connection fasteners are made of 304 stainless steel, less types, single tool, easy to operate and maintain. (4) The universal steering is made of cast steel parts with chrome-plated surface and axial tension greater than 1000 N. The radial angle of the steering meets 360 degrees and the axial turning angle is 20sh2 degrees. (5) Easy to install and can be operated without special construction training. (6) Steel arm and hoop pressure-resistant layer at 90 degrees temperature, hot melt adhesive does not flow, drip and other phenomena. The peeling strength of steel arm and hoop pressure resistant layer to steel is more than 10ON/2.5cm. (7) Corrosion resistant. All fasteners by salt spray test 72H, no rust, rust spots and other phenomena on the surface. (8) Fiber optic splint axial pulling force - fiber optic splint fastening fiber optic cable, the axial pulling force is greater than 1000N. (9) High dielectric strength. The dielectric strength of the pressure-resistant layer (insulation layer) is greater than 35KV/mm. (10) The volume resistivity of the pressure-resistant layer (insulation layer) is large. (Insulation layer) volume resistivity greater than 1013 Ω-M; surface pressure-resistant layer thickness of not less than 3mm. (11) The product has a simple structure, small load on the load-bearing pole road, high structural strength, and strong rust-proof ability of the fixture, which is suitable for early own pole road. (12) When sharing the rural pole road of the weak power operator, there is no need to hang the steel strand hanging wire and add non-insulated fixtures on the pole road for quick completion, which not only shortens the construction period but also reduces the investment cost. (13) The insulated gold is strong against rust and corrosion, high insulation, suitable for all kinds of specifications of poles and roads, no need for steel stranded wire suspension, simple operation, reliable strength, meeting the rural construction environment under complex conditions, short construction period and low total investment cost. Technical parameters (1) Altitude:H＜3000m (2) Maximum wind speed:40m/s (15-year average maximum at a height of 8m above ground) (3) Maximum ambient temperature:70℃ (4) Minimum ambient temperature:-40℃ (5) Maximum monthly average relative humidity:95% (6) Maximum daily temperature difference: 40℃ (7) Solarity: 0.1w/cm2 (wind speed is 0.5m/s) 8、Thunderstorm days:220 days/year. Product Type (01) 135 degree insulation and pressure-resisting fixture mainly used for 90-150 degree line corners on the pole, the fixture clamps and steel arms are fully insulated and plastic-coated, so they can be used not only on traditional communication poles, oil and wood poles, but also on power poles. The hoop and steel arm adopt full hard connection, which can effectively and firmly support the erection of the line, the two ends of the universal cable clamps, can freely adjust the direction of the optical cable in and out, the middle stainless steel hooks, can store the tray stay optical cable, can also be used as a position guide to support the optical cable. (02) 180 degree insulation and pressure fixing device 180 degree fixture and 90 degree fixture principle function and 135 degree is the same, but the steel arm of the fixture a no angle, a 90 degree angle, 180 degree in the universal cable fixture can be achieved with a small angle cable turning transition, the specific data: 180 ° ± 20 °. 90 degree fixture can be made to achieve a smaller angle cable turning. (03) 90 degree insulation pressure fixing device (04) Lead down the steel arm insulation voltage fixing device It is a matching component in the new line program, can not be used alone; it is generally used in conjunction with the fixture with hoop hooks, such as 135 degrees, 180 degrees, 90 degrees, etc. (05) Single / double hanging insulation voltage fixing device double hanging wire fixture is similar to the traditional iron accessories double hanging wire hoop, in our company's solutions are mainly used in straight lines, short distance pole line, hoop outer layer also do insulation anti-corrosion treatment, hoop each end is equipped with a cable universal fixture, can be bi-directional overhead fiber optic cable, the product is small, simple, easy to transport and carry. Double hanging self-supporting fixture Single hanging self-supporting fixture (06) Box holding bar pressure resistant fixing device (07) Pulling wire insulation voltage fixing device Pulling wire fixture is a universal soft hanging fixture for all poles, no matter with or without corner, it is composed of insulation hoop, flexible steel rope ring and pulling wire fixture, the product itself is lighter and more portable than several other pole insulation fixtures. (08) Line fixing device clips composed of multiple line clips stacked on top of each other, the product itself does not support the fiber optic cable, does not bear the tension of the fiber optic cable, but only a wall cable management, control the overall wiring aesthetics of the product, similar to the traditional wiring method of U-clip. Two line clips are composed of two half-pieces, one side of a cable hole, can simultaneously manage two fiber optic cables, triplex is composed of three half-pieces, can manage four fiber optic cables, and so on. (09) Over-the-wall pressure-resistant fixture It is composed of wall bracket, flexible steel rope ring and cable pulling fixture, its main role is to use when the wall transition, due to the wall laying of fiber optic cable throughout the line fixed device to manage the line, and the line fixed device itself does not bear the cable pull, so the introduction of over-the-wall fixture, in the introduction of fiber optic cable led out of the wall to ensure that there is sufficient support to support the cable, along the wall large Angle corner can also be used to protect the cable from damage by the wall corner. (10) edge cable pulling fixing device 主要用于敷设光纤的一种固定装置,适用于乡村宽带网络.可搭配光缆引下、行线固定装置等组件；具有辅助非金属自承式轻型光缆的免钢绞线架设、固定等作用，具有长效的防腐、耐压、抗拉等功效。 8F钢带抱箍尺寸( 单位为毫米 ) (11) Fiber optic splint self-supporting fiber optic cable fixture using fiber optic splint can be optional, there are single slot and double slot two types, as the name implies, single slot can only be fixed 1 "8" fiber optic cable, double slot can be fixed 2, splint installation can be through the ball or direct installation, ball transition installation can achieve free steering, direct installation The direct installation can not, such as lead down steel arm fixture. Single-slot plywood Double-slot plywood Product Use Self-supporting fiber optic cable fitting is mainly used for laying fiber optic cable, a fixed device, suitable for rural broadband network; suitable for all kinds of shared power poles, wooden poles to set up fiber optic cable; product structure is simple, easy to use, is a reliable choice for network construction of a fixed device. Product Application Tools Fiber optic fusion machine, movable wrench, hexagonal wrench, knife, tape measure, vise, loose sleeve stripping pliers, optical cable stripping pliers, optical power meter, level meter, impact drill, ladder, threader, hand pull hoist, scissors, foot buckle, safety belt, insulated gloves, safety helmet, etc. Frequently Asked Questions Is the self-supporting fiber optic cable fitting applicable to all fiber optic cables, or some, please list? Self-supporting cable fittings are suitable for non-metallic self-supporting center bundle tube type outdoor fiber optic cable, the product model is GYFXTC8F. What are the advantages of self-supporting fiber optic cable fittings and ordinary fiber optic cable construction? With full mechanical reinforcement connection and repeatable loading and unloading method, it has the advantages of simple structure, easy operation, shortening construction period and less investment, etc. The main force arm of the fixture and the outer surface of the fiber optic cable clamping parts are insulated and pressure resistant, which has a safer insulation and pressure resistance effect. What scenarios are self-supporting fiber optic cable fittings applicable to? Suitable for rural broadband network fiber optic cable end overhead construction; suitable for all kinds of power poles, wooden poles, walls, etc. laying fiber optic cable scenarios, especially suitable for the use of existing non-fiber optic cable pole scenarios; products have a variety of angle models to choose from, fiber optic cable clevis design for universal joints can be applied to a variety of turns and uneven cable alignment scenarios. 点击下载产品手册 相关产品 1/2 Sheet Metal Traditional fiber optic cable transfer box 主图1.jpg 主图2.jpg 主图6.jpg 主图1.jpg 1/17 Sheet Metal Fiber optic cable termination box 1/1 Sheet Metal All-in-one fusion tray 1/2 Sheet Metal No-jump fiber optic cable transfer box

产品详情 全部 通信 终端和服务器 通信 GJS03-M14AX-RS-144C(GP374) 帽式光缆接头盒, M11-14 该产品适用于室外光缆架空、管道等直通接续和分歧接续。 本产品具有高强度机械性能、高密封性能、耐腐蚀性强、耐候性优异等特点，可机械重复开启，可维护性高；结构布局合理，施工操作简单快捷。 应用场景 室外架空、管道等普通光缆接头接续，可用于城区或城乡普通光纤网络接续保护。 结构图 性能特点： 1、壳体采用优质工程塑料注塑工艺生产、添加有抗紫外线、耐老化助剂，机械强度高； 2、盒体采用单端进出光缆设计结构、便于架空挂杆等安装且筒体可快速开启进行检修和维护；开启盒体无须工具； 3、壳体与底部采用硅橡胶密封圈、光缆口利用耐温热缩管密封，气密性良好； 4、盒体具备电气断开或连通功能，可选配气嘴。 技术参数 1、适应环境温度：-20℃~+65℃。 2、大气压力：70~106Kpa。 3、轴向拉力：〉1000N/1min以上。 4、压扁：盒内充入40±5kpa气压，应能承受2000N/100mm横向均布压力，加力时间不小于1ｍｉｎ，试验后接头盒不漏气、无变形、无损伤。 5、冲击：光缆接头盒应能承受落高1m、钢球质量1.6Kg，冲击次数为3次的冲击。 6、弯曲：光缆接头盒与光缆接合处应能承受弯曲张力负荷为150N、弯曲角度±45°的10个循环的弯曲。 7、扭转：光缆接头盒应能承受扭矩不小于50N·m，扭转角度±90°，共10次循环的扭转。 8、跌落：光缆接头盒应能承受2.2m高度3次的跌落，试验后接头盒不漏气、无变形、无损伤。 9、抗拉力：〉2000N/10cm2压力，时间1min。 10、震动：接头盒承受振动频率为10Hz、振幅为±3mm、振动次数为106的振动，其光纤附加损耗变化值不超过0.2dB; 11、温度循环：-20℃~+65℃，内部气压40(+5)Kpa,循环次数10次， 常温后气压下降不超过5kpa。 12、光纤曲率半径>30mm,光纤熔接盘附加衰耗≤0.01dB。 施工常用工具 十字改刀、卷尺、锯工、热风机或喷枪。 参数表 型号：GJS03-M14AX-RS-144C(GP374) 盒体材质：PP 适应光缆直径：椭圆孔：10-20mm；小孔：10-30mm 入缆口数：2+8 熔纤盘最大容量(芯）：24 最大熔接芯数(芯）：144 光纤余纤收容装置：否 密封方式：机械+热缩密封 光纤成端类型及数量：SC/24 产品使用环境：架空、管道、地埋 点击下载产品手册 相关产品 主图1.jpg 主图2.jpg 主图5.jpg 主图1.jpg 1/5 帽式光缆接头盒, M11-14 GJS03-M15BX-A14-144C-NABS02（GP394） 主图1.jpg 主图2.jpg 主图6.jpg 主图1.jpg 1/6 帽式光缆接头盒, M11-14 GJS03-M15BX-A14-144C（GP394） 主图1.jpg 主图2.jpg 主图4.jpg 主图1.jpg 1/4 帽式光缆接头盒, M11-14 GJS03-M15AX-A14-144C-NABS02（GP394） 主图1.jpg 主图2.jpg 主图4.jpg 主图1.jpg 1/4 帽式光缆接头盒, M11-14 GJS03-M15AX-A14-144C（GP394）

产品详情 全部 通信 终端和服务器 Telecommunication GJS03-M12AX-18-12C (GP353) Dome Fiber Optic Splice Closure, M 11-14 The product is suitable for outdoor fiber optic cable splitting fiber splitting fiber into the home project. This product has the characteristics of high strength mechanical performance, high sealing performance, strong corrosion resistance, excellent weather resistance, etc. It can be mechanically repeatedly opened, high maintainability; reasonable structure layout, simple and quick construction operation. Application Scenario Outdoor overhead, wall-mounted and other installations, suitable for use at the end of the fiber optic broadband network access network. Structure picture Performance characteristics 1、The shell is made of high-quality engineering plastic injection molding process, with anti-UV and anti-aging additives, high mechanical strength; 2、The box body adopts single-ended in and out of the optical cable design structure, easy to install overhead hanging rods and other barrels can be quickly opened for maintenance and repair; no tools are required to open the box body; 3、Silicone rubber seal between the shell and the bottom. Technical parameters or parameters table 1、Adapted to the ambient temperature: -40℃~+65℃. 2、Atmospheric pressure: 70~106Kpa. 3、fiber radius of curvature > 37.5mm, fiber splicing tray additional attenuation ≤ 0.01dB; 4、with fiber into the end and fusion splicing; can take micro optical splitter maximum 1:8. Commonly used tools for construction cross cutter, tape measure. Parameter table Model: GJS03-M10AX-JX-432C(GP318) Box material: PP Adapt to the diameter of fiber optic cable: oval hole: 10-25mm; small hole: 6-20mm Number of cable entry ports: 2+8 Maximum capacity of fusion fiber tray (core): 24 Maximum fusion core (core): 432 (12-core ribbon) Fiber optic residual fiber intake device: Yes Sealing method: Mechanical Fiber into the end type and number: -- Product use environment: overhead, pipeline, buried 点击下载产品手册 相关产品 主图1.jpg 主图2.jpg 主图5.jpg 主图1.jpg 1/5 Dome Fiber Optic Splice Closure, M 11-14 GJS03-M15BX-A14-144C-NABS02(GP394) 主图1.jpg 主图2.jpg 主图6.jpg 主图1.jpg 1/6 Dome Fiber Optic Splice Closure, M 11-14 GJS03-M15BX-A14-144C(GP394) 主图1.jpg 主图2.jpg 主图4.jpg 主图1.jpg 1/4 Dome Fiber Optic Splice Closure, M 11-14 GJS03-M15AX-A14-144C-NABS02(GP394) 主图1.jpg 主图2.jpg 主图4.jpg 主图1.jpg 1/4 Dome Fiber Optic Splice Closure, M 11-14 GJS03-M15AX-A14-144C(GP394)

产品详情 全部 通信 终端和服务器 Terminal and Server Face recognition temperature measurement all-in-one machine MJ30-2T07 Face recognition all-in-one machine ​ Key selling points (1) Live detection: effective protection against attacks such as photos, videos and models (2) Mask detection: 85% accuracy of mask recognition, meeting the requirements of conventional mask detection, supporting mask wearing tips, and at the same time can be associated with access control; ±0.3℃; best detection distance 0.4m; support abnormal body temperature alarm (threshold value can be set) (3) IC card verification: support recognition of IC cards, NFC cards, etc (4) Health code verification: red/yellow code alarm, green code access (5) Voice announcement: support health code verification result, nucleic acid test result and time announcement, body temperature verification result announcement, and mask wearing prompt announcement Each main parameter index Product key parameters 点击下载产品手册 相关产品

产品详情 全部 通信 终端和服务器 通信 ODF架 钣金 光纤配线系列产品适用于中心局、光交节点、用户光纤接入网工程中各光接入点，完成光缆的引入、固定、开剥保护，光纤的熔接及保护，尾纤的存储及管理，光纤的固定连接及交叉连接的等功能，根据功能可分为线路侧光纤配线架、设备侧光纤配线架与光纤总配线架。 设备侧光纤配线架也称中间配线架，是完成通信机房内不同光通信设备的连接、调度、调试等功能，同时能完成线路端和设备端的跳线富余长度的存储功能的一种光纤配线架。 线路侧光纤配线架是光缆和光通信设备之间或光通信设备之间的配线连接设备。用于光纤通信系统中局端主干光缆的成端和分配，可方便地实现光纤线路的连接、分配和调度，用于传输网机房、汇聚机房、接入机房。 产品优点 设备侧光纤配线架 (1) 架体采用金属钣材整体焊接而成，整体成型，机械强度高 (2) 左右跳纤系列中间配线架，操作简单，界面清晰 (3) 前后跳纤系列中间配线架，单元箱结构，尾纤在内部存储，整体美观 (4) 单元箱面板开启角度大于100度，方便操作 (5) 卡入式适配器安装，适用于SC、FC、LC等多种适配器 线路侧光纤配线架 (1) 全封闭式结构，单面操作 (2) 架体采用优质冷轧钢板，整体焊接结构，强度高，刚性好；表面涂装采用静电喷塑工艺，耐腐蚀，外表美观 (3) 采用模块化结构，可根据不同要求灵活配置并实现并架安装 (4) 采用12芯熔接配线一体化模块，每个接续模块可单独抽出，操作方便 产品类型 产品用途 设备侧光纤配线架： 连接、调度、调试、存储 (1) 设备侧光纤配线架是完成通信机房内不同光通信设备的连接、调度、调试等功能 (2) 同时能完成线路端和设备端的跳线富余长度的存储功能的一种光纤配线架。 线路侧光纤配线架： 外线光缆熔接、成端、连接、调度和存储 (1) 线路侧配线架用于光纤通信系统中局端主干光缆的成端和分配。 (2) 线路侧配线架可方便地实现光纤线路的连接、分配、调度和存储。 产品应用工具 熔纤机、光缆切割刀、OTDR测试仪、笔式红光源、剥线钳、功率计、无水乙醇、、光纤切割刀、斜口钳、水平尺、冲击钻、螺丝刀、光功率计。 常见问题解答 产品的尺寸规格选择的依据是？ 在选择产品的尺寸时一般几个方面的考虑： (1) 是根据机房安装位置左右其他机柜的规格，选择相同或相近规格这样能保证视觉上的统一； (2) 根据安装位置的尺寸来定机架规格； (3) 根据所需要的芯数来选择。以上几点需要同时考虑。 产品适配器种类怎么选择-FC还是SC？ 根据机房里其他配套使用的设备所配适配器的种类来选择。 怎么判断需要选择线路侧配线架还是选择设备侧配线架？ 线路侧配线架配置有光缆开剥固定单元和12芯熔配一体化熔纤盘，可实现光缆的开剥固定及光纤的熔接成端；设备侧配线架则没有配置这两样，机架里面配置的适配器，不能对光缆进行开剥固定和光纤的熔纤。 怎么判断机架使用带状纤还是束状纤？ 根据使用的光缆来选择，带状光缆则选择带状尾纤，束状光缆选择束状尾纤。 机架的颜色怎么选择？ 机架的颜色根据机房里面其他设备的颜色做到统一、美观。 点击下载产品手册 相关产品 1/24 钣金 绝缘耐压固定装置（金具） 主图1.jpg 主图2.jpg 主图4.jpg 主图1.jpg 1/4 钣金 综合机柜 主图1.jpg 主图2.jpg 主图6.jpg 主图1.jpg 1/17 钣金 光缆终端盒 主图1.jpg 主图2.jpg 主图1.jpg 1/2 钣金 移动智慧厕所