搜索

产品详情 全部 通信 终端和服务器 Telecommunication GJS03-M3AX-24~288C-TZJ07-III-N15(GP286) Dome Fiber Optic Splice Closure, M 3 The product is suitable for outdoor fiber optic cable overhead, pipeline and other straight-through splicing and divergent splicing, the product has high strength mechanical properties, high sealing performance, strong corrosion resistance, excellent weather resistance, etc., can be mechanically repeated to open, high maintainability; reasonable structure layout, simple and quick construction operation. Application Scenario Outdoor overhead, pipeline, direct buried and other common fiber optic cable joint splicing, can be used for urban or urban and rural common fiber optic network splicing protection. Structure picture Performance characteristics 1、The shell is made of high-quality engineering plastic injection molding process, with anti-UV and anti-aging additives, high mechanical strength; 2、The box body adopts single-ended in and out of the optical cable design structure, easy to install overhead hanging rods and other barrels can be quickly opened for maintenance and repair; no tools are required to open the box body; 3、the shell and the bottom with silicone rubber sealing ring, optical cable mouth using temperature-resistant heat-shrinkable tube sealing, good airtightness; 4、Box with electrical disconnection or connection function, optional air nozzle; 5、compact size, more suitable in the pipeline or narrow space; 6、Anti-termites, acid and alkali resistant oil, resistance to extreme cold and high temperature environments need to be specified separately in the order. Technical parameters or parameters table 1、Adapted to the ambient temperature: -40℃~+65℃. 2、Atmospheric pressure: 70~106Kpa. 3、Axial tension: 〉1000N/1min or more. 4、flattening: the box is filled with 40 ± 5kpa air pressure, should be able to withstand 2000N/100mm lateral uniform pressure, the force time is not less than 1min, after the test joint box does not leak, no deformation, no damage. 5、 impact: fiber optic splice box should be able to withstand a drop height of 1m, the mass of the steel ball 1.6Kg, the number of impacts for 3 times the impact. 6、bending: fiber optic splice box and fiber optic cable joints should be able to withstand bending tension load of 150N, bending angle ± 45 ° of 10 cycles of bending. 7、torsion: fiber optic splice box should be able to withstand a torque of not less than 50N-m, torsion angle ± 90 °, a total of 10 cycles of twisting. 8、Drop: The fiber optic cable connector box should be able to withstand 3 drops at a height of 2.2m, and after the test, the connector box should not leak, no deformation, no damage. 9、tensile strength: 〉2000N/10cm2 pressure, time 1min. 10、vibration: splice box to withstand vibration frequency of 10Hz, amplitude of ± 3mm, the number of vibration for 106 vibration, the fiber additional loss change value does not exceed 0.2dB. 11、Temperature cycle: -40℃~+65℃, internal air pressure 40(+5)Kpa, 10 times cycle, air pressure drop not more than 5kpa after room temperature. 12、fiber radius of curvature > 30mm, fiber splice tray additional attenuation ≤ 0.01dB. Commonly used tools for construction cross cutters, heaters or spray guns, sawyers, tape measures. Parameter table Model: GJS03-M1AX-144C(GP200) Box material: PP Adapt to the diameter of fiber optic cable: oval hole: 10-25mm; small hole: 6-25mm Number of cable entry ports: 2+4 Maximum capacity of fusion fiber tray (core): 24 Maximum number of fusion cores (cores): 144 Fiber optic residual fiber intake device: No Sealing method: mechanical + heat shrink seal Fiber into the end type and number: -- Product use environment: overhead, pipeline, buried 点击下载产品手册 相关产品 主图1.jpg 主图2.jpg 主图4.jpg 主图1.jpg 1/4 Dome Fiber Optic Splice Closure, M 3 GJS03-M3AX-216C-W01 (GP211)

产品详情 全部 通信 终端和服务器 通信 中壁厚热缩圆管系列 热缩圆管 中壁热缩圆管由交联聚乙烯材料经过熔融挤出、辐照、扩张、涂胶等加工生产而成，具有优异的绝缘性、强度高、耐环境腐蚀性强、抗辐射、耐老化等特点，收缩倍比高，适用场景广泛。 应用场景 1、主要应用于中、低压电力电缆的终端或中间接头的绝缘保护、各类母线的绝缘防护； 2、通信电缆接头保护和光缆接头盒密封保护。 性能特点： 1、起始收缩温度：≥+70℃ 2、完全收缩温度：≥+125℃ 3、使用温度：-45℃~+110℃ 4、抗紫外线、耐磨 5、环保标准：RoHS 6、热缩倍率：>3:1 7、标准颜色：黑（其它颜色可定做） 技术参数 性能 指标 试验方法 拉伸强度≥12 Mpa ASTM D 2671 断裂伸长率≥300% ASTM D 2671 老化后强度≥8.4 Mpa 158℃×168h 老化后断裂伸长率 ≥200% 158℃×168h 轴向变化率 -8%~+8% ASTM D 2671 击穿强度 ≥20kV/mm IEC 60243 体积电阻率 ≥1014 Ω·cm IEC 60093 施工常用工具 卷尺、喷枪或热吹风。 参数表 点击下载产品手册 相关产品

产品详情 全部 通信 终端和服务器 Telecommunication MODF rack Sheet Metal Fiber optic wiring series products are suitable for central office, optical cross node, user fiber optic access network project in each optical access point, to complete the introduction of optical cable, fixed, open stripping protection, fiber fusion and protection, pigtail storage and management, optical fiber fixed connection and cross-connected functions, according to the function can be divided into line side fiber optic distribution frame, equipment side fiber optic distribution frame and fiber optic total distribution frame. Fiber optic bus distribution frame integrates line side and equipment side ODF function, with high density and flexible wiring characteristics, improve the effective management and protection of optical fiber, to meet the centralized management requirements of a large number of outgoing optical cables in transmission and access rooms. Centralized maintenance of the network saves maintenance costs and improves the standard level of maintenance and maintenance quality. Fiber optic distribution frame is the line side to connect outdoor fiber optic cable, equipment side to connect the optical line terminal or transmission equipment, can dispatch the fiber core serial number in the fiber optic cable and change the optical transmission system road sequence through the patch fiber, and has the fiber optic cable fixed and protection device and test port. Fiber optic main distribution frame is divided into open and closed two structures. Product Benefits (1) Invoking the MDF main distribution frame management model: front line side, back equipment side, continuing existing maintenance staff habits; (2) 72-core fusion wiring unit box design on the line side and 96-core adapter rotary panel wiring unit box design on the equipment side for easy operation; (3) "Foolproof" routing: layer-by-layer import and layer-by-layer diversion on the same side for easy operation, maintenance and management; (4) The rack has independent multi-layer fiber optic channels, reducing the pressure on the server room channels and facilitating scheduling management; (5) Customizable patch fiber lengths to reduce fiber patch redundancy and tangles; (6) (a) The cable is managed in a partitioned manner within the rack, allowing for three-dimensional cross-free patch fiber routing; (7) Equipped with fiber optic cable storage device, which can store the remaining length of fiber optic cable, the left side into the end of the fiber optic cable, the right side storage jumpers. Product Type Open MODF rack The structure of MODF rack adopts double-sided rack structure, horizontal and vertical racks are composed of several fusion and distribution integrated unit frames and fiber-hopping frames, and horizontal channels can be appropriately distributed in the middle of horizontal units. The inline rack is composed of 72-core unit frame plus 12-core fusion and distribution integrated tray, and the horizontal rack is composed of 96-core patch fiber frame. the inline side of MODF rack is also called line side, which is used for centralized fusion and termination of external fiber cables, and the horizontal side is also called equipment side, which is used for distribution and dispatching of internal fiber. Enclosed MODF rack Closed MODF rack structure and open structure is the same, but in the rack body installed with front and rear doors and side panels, the same horizontal and inline racks are composed of a number of fusion and distribution of integrated unit frame and fiber-hopping frame, in the middle of the horizontal unit can be properly distributed horizontal channel. The inline rack is composed of 72-core unit frame plus 12-core fusion and distribution integrated tray, and the horizontal rack is composed of 96-core fiber-hopping frame. The principle of horizontal and inline side is the same as open MODF. Optical Distribution Frame Configuration Table Product use Fiber optic cable fusion, termination, connection, dispatch and storage. (1) The line side can be used for terminating and distributing fiber optic cables at the local end of the trunk in fiber optic communication systems. (2) The line side allows for easy connection, distribution, scheduling and storage of fiber optic lines. (3) Equipment side is to complete the connection, scheduling and commissioning of different optical communication equipment in the communication room. (4) It is a kind of fiber optic patch panel that can complete the storage function of the spare length of patch cords at the line side and equipment side at the same time. Product application tools Fiber melting machine, optical fiber cutting knife, OTDR tester, pen red light source, stripping pliers, power meter, anhydrous ethanol,, fiber cutting knife, oblique pliers, level, impact drill, screwdriver, optical power meter. Frequently Asked Questions How can I determine whether to choose closed or open MODF racks on site? The whole row of racks need to be connected with horizontal fiber using open MODF rack, do not need to be connected with horizontal fiber can choose closed MODF rack. What is the basis for choosing the size of the product? In selecting the size of the product in general several considerations; 1. is based on the installation location of the room around the specifications of other cabinets, choose the same or similar specifications so as to ensure visual unity; 2. according to the size of the installation location to determine the rack specifications; 3. according to the number of cores needed to choose. The above points need to be considered at the same time. How to choose the product adapter type-FC or SC? The choice is based on the type of adapter used with the other equipment used in the server room. How can I tell if a rack is using ribbon or bundled fiber? According to the fiber optic cable used to choose, ribbon fiber optic cable then choose ribbon pigtail, bundle fiber optic cable choose bundle pigtail. How do I choose the color of the rack? The color of the rack is uniform and beautiful according to the color of other equipment inside the server room. 点击下载产品手册 相关产品 1/2 Sheet Metal Traditional fiber optic cable transfer box 主图1.jpg 主图2.jpg 主图6.jpg 主图1.jpg 1/17 Sheet Metal Fiber optic cable termination box 1/1 Sheet Metal All-in-one fusion tray 1/2 Sheet Metal No-jump fiber optic cable transfer box

Product Details All Telecommunication Terminal and Server Electric 上一个产品 下一个产品 Expanded capacity fiber optic cable transfer box With the continuous development of business, the number of fiber optic cable access users also grew rapidly, fiber optic cable transfer box as an important unit of urban backbone ring network management, the expansion of the entire network plays a vital role, for the newly established fiber optic cable transfer box, municipal approval is quite difficult, the construction situation is also more complex. For this reason, combined with years of experience in communication lines, for the operator's network transformation and expansion design, to provide a series of optical cable transfer box in situ transformation and expansion program. On the basis of not interrupting user communications, the full capacity of the cable transfer box in situ in situ expansion, the 144-core cable transfer box seamless expansion to 288-core cable transfer box, the 288-core cable transfer box seamless expansion to 576-core cable transfer box (or 576-core expansion to 1152-core). Solve the problem of full capacity due to the cable transfer box and can not increase access to fiber, while facilitating the installation and maintenance of users. If you directly take the replacement of a larger cable transfer box is not only high cost, long cycle, and to re-connect the fiber optic cable, online users need to interrupt the user communication services, affecting the customer's daily communication needs, resulting in large user opinions, communication losses more. Fiber optic cable transfer box does not interrupt the emergence of communications expansion services, thereby completely solving this long-term problem plaguing the communications maintenance department. Product advantages Solve the problem of difficult new optical interchange and realize the function of expanding optical interchange; - Cost savings by eliminating the need for resources such as new pipelines; Increasing box capacity without interrupting original box operations; The box material is all 304 stainless steel, effectively achieving anti-corrosion performance; Outdoor type with high rainproof performance, rainproof and dustproof grade can reach IP65 or above; Fully modular internal design, configurable on demand and flexible in application; Optimized route management system, clearer marking With a variety of fusion, wiring markings, convenient fusion and wiring records. Reasonable fiber coiling structure, to ensure that the fiber winding radius of any position is greater than 30mm. Adopt 12-core fusion and distribution integrated module, each connection module can be withdrawn individually, easy to operate; adopt fusion and distribution integrated pull-out module, so that the cross-connection box has large capacity and high density; Card mounting FC, SC and other adapters, adapters and the front of the chassis at an oblique angle, not only to ensure the radius of curvature of the jumper, but also to avoid the arc light burns the eyes; Box high-voltage protective grounding and chassis voltage resistance between ≥ 3000V (DC) / 1min, no breakdown, no flying arc; High-voltage protective grounding and chassis insulation resistance: ≥2×104MΩ/500V(DC); Flame retardant performance: up to GB4609/FV-0 level Boxes with safe and reliable optical cable fixing and grounding protection devices. Product Type Double expansion of three: the use of set modification technology, the new box using the front and rear side single door structure (three doors), the side compartments are relatively independent; Side stand expansion: the original cross-over box will be installed directly next to the new cross-over box, open square holes in the side of the cross-over box, connected and sealed with a connection tube (this connection tube to go jumping fiber with), the installation can begin wiring operations; Side expansion, rear expansion: the original handover box shell removed, retaining the previous installation bracket, and re-fixed inside the new box, adding new equipment in the additional space, full frontal operation. Product usage Fiber optic cable transfer box is used for outdoor backbone fiber optic cable and wiring fiber optic cable connection interface equipment, to achieve fiber optic splicing, wiring has a direct connection and cross-connection function. Product application tools Fiber melting machine, power meter, anhydrous ethanol, OTDR tester, wire cutter, fiber cutting knife, diagonal pliers, horizontal ruler, impact drill, screwdriver, bellows, black tape, optical power meter, pen red light source, etc. Frequently Asked Questions What is the waterproof and dustproof level of the optical cable transfer box? IP65。 Is the expansion cable transfer box can be customized according to demand? The expansion of the optical cable transfer box is combined with the actual situation on site and customer demand for custom design. 上一个产品 下一个产品

请检查您的链接是否正确或联系我司人员 回到前宏主页

产品详情 全部 通信 终端和服务器 Telecommunication GJS03-M1AX-24~144C-SRZJ14-W20(GP1405) Dome Fiber Optic Splice Closure, M 1 The product is suitable for outdoor fiber optic cable overhead, pipeline and other straight-through splicing and divergence splicing. This product has the characteristics of high strength mechanical performance, high sealing performance, strong corrosion resistance, excellent weather resistance, etc., can be mechanically repeated to open, high maintainability; reasonable structure layout, simple and quick construction operation. Application Scenario Outdoor overhead, pipeline, direct buried and other common fiber optic cable joint splicing, can be used for urban or urban and rural common fiber optic network splicing protection. Performance characteristics 1、The shell is made of high-quality engineering plastic injection molding process, with anti-UV and anti-aging additives, high mechanical strength; 2、The box body adopts single-ended in and out of the optical cable design structure, easy to install overhead hanging rods and other barrels can be quickly opened for maintenance and repair; no tools are required to open the box body; 3、 the shell and the bottom with silicone rubber sealing ring, optical cable mouth using temperature-resistant heat-shrinkable tube sealing, good airtightness; 4、Box with electrical disconnection or connection function, optional air nozzle; 5、compact size, more suitable in the pipeline or narrow space; 6、Anti-termites, acid and alkali resistant oil, resistance to extreme cold and high temperature environments need to be specified separately in the order. Technical parameters or parameters table 1、Adapted to the ambient temperature: -40℃~+65℃. 2、Atmospheric pressure: 70~106Kpa. 3、Axial tension: 〉1000N/1min or more. 4、flattening: the box is filled with 40 ± 5kpa air pressure, should be able to withstand 2000N/100mm lateral uniform pressure, the force time is not less than 1min, after the test joint box does not leak, no deformation, no damage. 5、impact: fiber optic splice box should be able to withstand a drop height of 1m, the mass of the steel ball 1.6Kg, the number of impacts for 3 times the impact. 6、bending: fiber optic splice box and fiber optic cable joints should be able to withstand bending tension load of 150N, bending angle ± 45 ° of 10 cycles of bending. 7、torsion: fiber optic splice box should be able to withstand a torque of not less than 50N-m, torsion angle ± 90 °, a total of 10 cycles of twisting. 8、Drop: The fiber optic cable connector box should be able to withstand 3 drops at a height of 2.2m, and after the test, the connector box should not leak, no deformation, no damage. 9、tensile strength: 〉2000N/10cm2 pressure, time 1min. 10、vibration: splice box to withstand vibration frequency of 10Hz, amplitude of ± 3mm, the number of vibration for 106 vibration, the fiber additional loss change value does not exceed 0.2dB. 11、Temperature cycle: -40℃~+65℃, internal air pressure 40(+5)Kpa, 10 times cycle, air pressure drop not more than 5kpa after room temperature. 12、fiber radius of curvature > 30mm, fiber fusion tray additional attenuation ≤ 0.01dB. Commonly used tools for construction cross cutters, heaters or spray guns, sawyers, tape measures. Parameter table Model: GJS03-M1AX-24~144C-SRZJ14-W20(GP1405) Box material: PP Adapt to the diameter of fiber optic cable: elliptical hole: 10-25mm Small hole: 6-25mm Number of cable entry ports: 2+4 Maximum capacity of fusion fiber tray (core:) 24 Maximum number of fusion cores (cores): 144 Fiber optic residual fiber intake device: Yes Sealing method: mechanical + heat shrink seal Fiber into the end type and number: -- Product use environment: overhead, pipeline, buried 点击下载产品手册 相关产品 主图1.jpg 主图2.jpg 主图3.jpg 主图1.jpg 1/3 Dome Fiber Optic Splice Closure, M 1 GJS03-M1AX-A8-144C-W30(GP1416) 主图1.jpg 主图2.jpg 主图3.jpg 主图1.jpg 1/3 Dome Fiber Optic Splice Closure, M 1 GJS03-M1AX-A8,SC-24 24-72C-D(GP297) 主图1.jpg 主图2.jpg 主图3.jpg 主图1.jpg 1/3 Dome Fiber Optic Splice Closure, M 1 GJS03-M1AX-A8-24-96C-N08(GP218) 主图1.jpg 主图2.jpg 主图4.jpg 主图1.jpg 1/4 Dome Fiber Optic Splice Closure, M 1 GJS03-M1AX-A8-24~96C(GP204)

产品详情 全部 通信 终端和服务器 通信 GJS03-M6AX-96C-I(GP339) 帽式光缆接头盒, M6 该产品适用于室外光缆架空、管道等直通接续和分歧接续，本产品具有高强度机械性能、高密封性能、耐腐蚀性强、耐候性优异等特点，可机械重复开启，可维护性高；结构布局合理，施工操作简单快捷。 应用场景 室外架空、管道等普通光缆接头接续，可用于城区或城乡普通光纤网络接续保护。 性能特点： 1、壳体采用优质工程塑料注塑工艺生产、添加有抗紫外线、耐老化助剂，机械强度高； 2、盒体采用单端进出光缆设计结构、便于架空挂杆等安装且筒体可快速开启进行检修和维护；开启盒体无须工具； 3、壳体与底部采用硅橡胶密封圈、光缆口利用耐温热缩管密封，气密性良好； 4、盒体具备电气断开或连通功能，可选配气嘴。 技术参数 1、适应环境温度：-20℃~+65℃。 2、大气压力：70~106Kpa。 3、轴向拉力：〉8000N/1min以上。 4、压扁：盒内充入40±5kpa气压，应能承受2000N/100mm横向均布压力，加力时间不小于1ｍｉｎ，试验后接头盒不漏气、无变形、无损伤。 5、冲击：光缆接头盒应能承受落高1m、钢球质量1.0Kg，冲击次数为3次的冲击。 6、弯曲：光缆接头盒与光缆接合处应能承受弯曲张力负荷为150N、弯曲角度±45°的10个循环的弯曲。 7、扭转：光缆接头盒应能承受扭矩不小于50N·m，扭转角度±90°，共10次循环的扭转。 8、跌落：光缆接头盒应能承受2m高度3次的跌落，试验后接头盒不漏气、无变形、无损伤。 9、抗拉力：〉1000N/10cm2压力，时间1min。 10、震动：接头盒承受振动频率为10Hz、振幅为±3mm、振动次数为106的振动，其光纤附加损耗变化值不超过0.2dB; 11、温度循环：-20℃~+65℃，内部气压40(+5)Kpa,循环次数10次， 常温后气压下降不超过5kpa。 12、光纤曲率半径>30mm,光纤熔接盘附加衰耗≤0.01dB。 施工常用工具 十字改刀、热风机或喷枪、锯工、卷尺。 参数表 型号：GJS03-M6AX-96C-I(GP339) 盒体材质：PP 适应光缆直径：椭圆孔：10-20mm；小孔：6-16mm 入缆口数：2+4 熔纤盘最大容量(芯）：24 最大熔接芯数(芯）：96 光纤余纤收容装置：是 密封方式：机械+热缩密封 光纤成端类型及数量：--- 产品使用环境：架空、管道、地埋 点击下载产品手册 相关产品 主图1.jpg 主图2.jpg 主图5.jpg 主图1.jpg 1/5 帽式光缆接头盒, M6 GJS03-M6AX-48C(GP223)

Product Details All Telecommunication Terminal and Server Electric 上一个产品 下一个产品 Pressure-resistant fixtures (hardware fittings) Self-supporting fiber optic cable pressure fixed device, also known as self-supporting cable fixture, is our company's independent research and development of fiber optic cable overhead construction, it is often used in the construction of the end of rural fiber optic cable lines, due to the overhead laying of fiber optic cable construction environment across the country is different and complex, so our company gives a complete set of end of the cable construction program, which contains a variety of models of fiber optic cable fixture, self-supporting cable fixture helps the construction side to shorten the construction period The self-supporting cable fittings can help builders shorten the construction period and save the total project investment. Self-supporting cable fittings are suitable for fixing non-metallic self-supporting fiber optic cables on fiber optic cable poles or shared power poles. It adopts full mechanical reinforcement connection and repeatable loading and unloading method, with simple structure, convenient operation, shorten the construction period and other characteristics. It is a reliable choice of fixing device for fiber optic cable network pole construction. Self-supporting cable fittings are suitable for non-metallic self-supporting center bundle tube outdoor fiber optic cable, the product model is GYFXTC8F. Product Benefits (1) The hoop and steel arm are made of Q235A flat steel covered with anti-corrosion and high-voltage insulating heat-shrinkable material, withstanding voltage up to 10KV, no flying arc, no breakdown; meet all the power poles and communication poles. (2) Fiber optic cable clamps are injection molded with special plastic with anti-aging agent and anti-UV radiation material, with high anti-aging and anti-UV capability and long service life; (3) So the connection fasteners are made of 304 stainless steel, less types, single tool, easy to operate and maintain. (4) The universal steering is made of cast steel parts with chrome-plated surface and axial tension greater than 1000 N. The radial angle of the steering meets 360 degrees and the axial turning angle is 20sh2 degrees. (5) Easy to install and can be operated without special construction training. (6) Steel arm and hoop pressure-resistant layer at 90 degrees temperature, hot melt adhesive does not flow, drip and other phenomena. The peeling strength of steel arm and hoop pressure resistant layer to steel is more than 10ON/2.5cm. (7) Corrosion resistant. All fasteners by salt spray test 72H, no rust, rust spots and other phenomena on the surface. (8) Fiber optic splint axial pulling force - fiber optic splint fastening fiber optic cable, the axial pulling force is greater than 1000N. (9) High dielectric strength. The dielectric strength of the pressure-resistant layer (insulation layer) is greater than 35KV/mm. (10) The volume resistivity of the pressure-resistant layer (insulation layer) is large. (Insulation layer) volume resistivity greater than 1013 Ω-M; surface pressure-resistant layer thickness of not less than 3mm. (11) The product has a simple structure, small load on the load-bearing pole road, high structural strength, and strong rust-proof ability of the fixture, which is suitable for early own pole road. (12) When sharing the rural pole road of the weak power operator, there is no need to hang the steel strand hanging wire and add non-insulated fixtures on the pole road for quick completion, which not only shortens the construction period but also reduces the investment cost. (13) The insulated gold is strong against rust and corrosion, high insulation, suitable for all kinds of specifications of poles and roads, no need for steel stranded wire suspension, simple operation, reliable strength, meeting the rural construction environment under complex conditions, short construction period and low total investment cost. Technical parameters (1) Altitude:H＜3000m (2) Maximum wind speed:40m/s (15-year average maximum at a height of 8m above ground) (3) Maximum ambient temperature:70℃ (4) Minimum ambient temperature:-40℃ (5) Maximum monthly average relative humidity:95% (6) Maximum daily temperature difference: 40℃ (7) Solarity: 0.1w/cm2 (wind speed is 0.5m/s) 8、Thunderstorm days:220 days/year. Product Type (01) 135 degree insulation and pressure-resisting fixture mainly used for 90-150 degree line corners on the pole, the fixture clamps and steel arms are fully insulated and plastic-coated, so they can be used not only on traditional communication poles, oil and wood poles, but also on power poles. The hoop and steel arm adopt full hard connection, which can effectively and firmly support the erection of the line, the two ends of the universal cable clamps, can freely adjust the direction of the optical cable in and out, the middle stainless steel hooks, can store the tray stay optical cable, can also be used as a position guide to support the optical cable. (02) 180 degree insulation and pressure fixing device 180 degree fixture and 90 degree fixture principle function and 135 degree is the same, but the steel arm of the fixture a no angle, a 90 degree angle, 180 degree in the universal cable fixture can be achieved with a small angle cable turning transition, the specific data: 180 ° ± 20 °. 90 degree fixture can be made to achieve a smaller angle cable turning. (03) 90 degree insulation pressure fixing device (04) Lead down the steel arm insulation voltage fixing device It is a matching component in the new line program, can not be used alone; it is generally used in conjunction with the fixture with hoop hooks, such as 135 degrees, 180 degrees, 90 degrees, etc. (05) Single / double hanging insulation voltage fixing device double hanging wire fixture is similar to the traditional iron accessories double hanging wire hoop, in our company's solutions are mainly used in straight lines, short distance pole line, hoop outer layer also do insulation anti-corrosion treatment, hoop each end is equipped with a cable universal fixture, can be bi-directional overhead fiber optic cable, the product is small, simple, easy to transport and carry. Double hanging self-supporting fixture Single hanging self-supporting fixture (06) Box holding bar pressure resistant fixing device (07) Pulling wire insulation voltage fixing device Pulling wire fixture is a universal soft hanging fixture for all poles, no matter with or without corner, it is composed of insulation hoop, flexible steel rope ring and pulling wire fixture, the product itself is lighter and more portable than several other pole insulation fixtures. (08) Line fixing device clips composed of multiple line clips stacked on top of each other, the product itself does not support the fiber optic cable, does not bear the tension of the fiber optic cable, but only a wall cable management, control the overall wiring aesthetics of the product, similar to the traditional wiring method of U-clip. Two line clips are composed of two half-pieces, one side of a cable hole, can simultaneously manage two fiber optic cables, triplex is composed of three half-pieces, can manage four fiber optic cables, and so on. (09) Over-the-wall pressure-resistant fixture It is composed of wall bracket, flexible steel rope ring and cable pulling fixture, its main role is to use when the wall transition, due to the wall laying of fiber optic cable throughout the line fixed device to manage the line, and the line fixed device itself does not bear the cable pull, so the introduction of over-the-wall fixture, in the introduction of fiber optic cable led out of the wall to ensure that there is sufficient support to support the cable, along the wall large Angle corner can also be used to protect the cable from damage by the wall corner. (10) edge cable pulling fixing device 主要用于敷设光纤的一种固定装置,适用于乡村宽带网络.可搭配光缆引下、行线固定装置等组件；具有辅助非金属自承式轻型光缆的免钢绞线架设、固定等作用，具有长效的防腐、耐压、抗拉等功效。 8F钢带抱箍尺寸( 单位为毫米 ) (11) Fiber optic splint self-supporting fiber optic cable fixture using fiber optic splint can be optional, there are single slot and double slot two types, as the name implies, single slot can only be fixed 1 "8" fiber optic cable, double slot can be fixed 2, splint installation can be through the ball or direct installation, ball transition installation can achieve free steering, direct installation The direct installation can not, such as lead down steel arm fixture. Single-slot plywood Double-slot plywood Product Use Self-supporting fiber optic cable fitting is mainly used for laying fiber optic cable, a fixed device, suitable for rural broadband network; suitable for all kinds of shared power poles, wooden poles to set up fiber optic cable; product structure is simple, easy to use, is a reliable choice for network construction of a fixed device. Product Application Tools Fiber optic fusion machine, movable wrench, hexagonal wrench, knife, tape measure, vise, loose sleeve stripping pliers, optical cable stripping pliers, optical power meter, level meter, impact drill, ladder, threader, hand pull hoist, scissors, foot buckle, safety belt, insulated gloves, safety helmet, etc. Frequently Asked Questions Is the self-supporting fiber optic cable fitting applicable to all fiber optic cables, or some, please list? Self-supporting cable fittings are suitable for non-metallic self-supporting center bundle tube type outdoor fiber optic cable, the product model is GYFXTC8F. What are the advantages of self-supporting fiber optic cable fittings and ordinary fiber optic cable construction? With full mechanical reinforcement connection and repeatable loading and unloading method, it has the advantages of simple structure, easy operation, shortening construction period and less investment, etc. The main force arm of the fixture and the outer surface of the fiber optic cable clamping parts are insulated and pressure resistant, which has a safer insulation and pressure resistance effect. What scenarios are self-supporting fiber optic cable fittings applicable to? Suitable for rural broadband network fiber optic cable end overhead construction; suitable for all kinds of power poles, wooden poles, walls, etc. laying fiber optic cable scenarios, especially suitable for the use of existing non-fiber optic cable pole scenarios; products have a variety of angle models to choose from, fiber optic cable clevis design for universal joints can be applied to a variety of turns and uneven cable alignment scenarios. 上一个产品 下一个产品

产品详情 全部 通信 终端和服务器 终端和服务器 400万智能室外球形摄像机MJ-ES401 春促摄像机 ​ 主要卖点 (1) 最高分辨率可达4MP(2560x1440) (2) 采用最新的H.265编码压缩技术 (3) 支持水平云台、垂直云台转动 (4) 内置 AI 算法 (5) 支持区域入侵时联动告警音频 (6) 支持无线网络wifi6接入 (7) 支持全彩、智能、红外三种夜视模式 各项主要参数指标 产品关键参数 点击下载产品手册 相关产品

产品详情 全部 通信 终端和服务器 Telecommunication GJS03-M10AX-JX-24~288C-SRZJ-21 Dome Fiber Optic Splice Closure, M 10 The product is suitable for outdoor fiber optic cable overhead, pipeline and other straight-through splicing and divergence splicing. The product has the characteristics of high strength mechanical performance, high sealing performance, strong corrosion resistance, excellent weather resistance, etc. It can be mechanically repeatedly opened, high maintainability; reasonable structure layout, simple and quick construction operation. Application Scenario Outdoor overhead, pipeline, direct buried and other common fiber optic cable joint splicing, can be used for urban or urban and rural common fiber optic network splicing protection. Structure picture Performance characteristics 1、The shell is made of high-quality engineering plastic injection molding process, with anti-UV and anti-aging additives, high mechanical strength; 2、The box body adopts single-ended in and out of the optical cable design structure, easy to install overhead hanging rods and other barrels can be quickly opened for maintenance and repair; no tools are required to open the box body; 3、the shell and the bottom with silicone rubber sealing ring, optical cable mouth using temperature-resistant heat-shrinkable tube sealing, good airtightness; 4、Box with electrical disconnection or connection function, optional air nozzle; 5、high-capacity splicing, to meet the trunk or special fiber optic cable splicing protection; 7、 termite resistance, acid and alkali resistant oil, resistance to extreme cold and high temperature environment need to order separate instructions. Technical parameters or parameters table 1、Adapted to the ambient temperature: -40℃~+65℃. 2、Atmospheric pressure: 70~106Kpa. 3、Axial tension: 〉1000N/1min or more. 4、flattening: the box is filled with 40 ± 5kpa air pressure, should be able to withstand 2000N/100mm lateral uniform pressure, the force time is not less than 1min, after the test joint box does not leak, no deformation, no damage. 5、 impact: fiber optic splice box should be able to withstand a drop height of 1m, the mass of the steel ball 1.6Kg, the number of impacts for 3 times the impact. 6、bending: fiber optic splice box and fiber optic cable joints should be able to withstand bending tension load of 150N, bending angle ± 45 ° of 10 cycles of bending. 7、torsion: fiber optic splice box should be able to withstand a torque of not less than 50N-m, torsion angle ± 90 °, a total of 10 cycles of twisting. 8、Drop: The fiber optic cable connector box should be able to withstand 3 drops at a height of 2.2m, and after the test, the connector box should not leak, no deformation, no damage. 9、tensile strength: 〉2000N/10cm2 pressure, time 1min. 10、vibration: splice box to withstand vibration frequency of 10Hz, amplitude of ± 3mm, the number of vibration for 106 vibration, the fiber additional loss change value does not exceed 0.2dB. 11、Temperature cycle: -40℃~+65℃, internal air pressure 40(+5)Kpa, 10 times cycle, air pressure drop not more than 5kpa after room temperature. 12、fiber radius of curvature > 30mm, fiber splice tray additional attenuation ≤ 0.01dB. Commonly used tools for construction cross cutter, tape measure. Parameter table Model: GJS03-M9AX-24~144C(GP317) Box material: PP Adapt to the diameter of fiber optic cable oval hole: 10-25mm; small hole: 6-25mm Number of cable entry ports: 2+6 Maximum capacity of fusion fiber tray (core): 24 Maximum number of fusion cores (cores): 144 Fiber optic residual fiber intake device: Yes Sealing method: mechanical + heat shrink seal Fiber into the end type and number: -- Product use environment: overhead, pipeline, buried 点击下载产品手册 相关产品 主图1.jpg 主图2.jpg 主图5.jpg 主图1.jpg 1/5 Dome Fiber Optic Splice Closure, M 10 GJS03-M10AX-RS-432C-N14(GP367) 主图1.jpg 主图2.jpg 主图5.jpg 主图1.jpg 1/5 Dome Fiber Optic Splice Closure, M 10 GJS03-M10AX-JX-432C(GP318) 主图1.jpg 主图2.jpg 主图4.jpg 主图1.jpg 1/4 Dome Fiber Optic Splice Closure, M 10 GJS03-M10AX-RS-288C-SRZJ-21