搜索

Product Details All Telecommunication Terminal and Server Electric 上一个产品 下一个产品 GP01-H42 The product is suitable for outdoor fiber optic cable overhead, pipeline and other straight-through splicing and divergence and other trunk fiber optic cable and common fiber optic cable network splicing. The use of double-ended horizontal design structure, the product has a high strength mechanical performance, high sealing performance, corrosion resistance, excellent weather resistance, etc., multi-cable port management, can be mechanically repeated to open; reasonable structure layout, construction operation is simple and fast. Application Scenario Outdoor overhead, pipeline, direct buried and other common fiber optic cable splice splicing, can be used for metropolitan area network backbone, urban or urban and rural common fiber optic network splicing protection. Structure picture Performance characteristics 1、The shell is made of high-quality engineering plastic injection molding process, with anti-UV and anti-aging additives, high mechanical strength; 2、The box adopts double-ended optical cable in and out design structure, convenient overhead hanging rod and other openable structure; 3、the box body box cover using non-vulcanized rubber sealing structure, good airtightness; 4、Box with electrical disconnection or connection function, optional air nozzle; 5、high-capacity splicing, to meet the trunk or special fiber optic cable splicing protection; 7、termite resistance, acid and alkali resistant oil, resistance to extreme cold and high temperature environment need to order separate instructions. Technical parameters or parameters table 1、Adapted to the ambient temperature: -40℃~+65℃. 2、Atmospheric pressure: 70~106Kpa. 3、Axial tension: 〉1000N/1min or more. 4、flattening: the box is filled with 60 ± 5kpa air pressure, should be able to withstand 2000N/100mm lateral uniform pressure, the force time is not less than 1min, after the test joint box does not leak, no deformation, no damage. 5、impact: fiber optic splice box should be able to withstand a drop height of 1m, the mass of the steel ball 1.6Kg, the number of impacts for 3 times the impact. 6、bending: fiber optic splice box and fiber optic cable joints should be able to withstand bending tension load of 150N, bending angle ± 45 ° of 10 cycles of bending. 7、torsion: fiber optic splice box should be able to withstand a torque of not less than 50N-m, torsion angle ± 90 °, a total of 10 cycles of twisting. 8、Drop: The fiber optic cable connector box should be able to withstand 3 drops at a height of 2.2m, and after the test, the connector box should not leak, no deformation, no damage. 9、tensile strength: 〉2000N/10cm2 pressure, time 1min. 10、vibration: splice box to withstand vibration frequency of 10Hz, amplitude of ± 3mm, the number of vibration for 106 vibration, the fiber additional loss change value does not exceed 0.2dB. 11、Temperature cycle: -40℃~+65℃, internal air pressure 60(+5)Kpa, 10 times cycle, air pressure drop not more than 5kpa after room temperature. 12、fiber radius of curvature > 37.5mm, fiber fusion tray additional attenuation ≤ 0.01dB. Commonly used tools for construction cross cutter, tape measure. 上一个产品 下一个产品

Product Details All Telecommunication Terminal and Server Electric 上一个产品 下一个产品 GP01-H25 The product is suitable for outdoor fiber optic cable overhead direct connection and divergence connection. Double-ended horizontal screw-free design structure, the product has a high sealing performance, corrosion resistance, excellent weather resistance, etc., multi-cable port management, box and cable mouth are designed with silicone rubber sealing structure, repeatedly open the box and other operations are simple and fast and do not need to replace the sealing materials; reasonable structure layout, construction and operation is simple and fast. Application Scenario Outdoor overhead, pipeline and other common fiber optic cable joint splicing, can be used for urban or urban and rural common fiber optic network splicing protection. Structure picture Performance characteristics 1、The shell is made of high-quality engineering plastic injection molding process, with anti-UV and anti-aging additives, high mechanical strength; 2、The box body adopts double-ended optical cable in and out design structure, convenient overhead hanging rod and other openable structure, screw-free box sealing design, quick and easy to repeat opening, no need to replace sealing materials; very convenient for maintenance inspection and other operations; 3、the box body box cover and optical cable mouth are silicon rubber sealing structure, good airtightness; 4、Box with electrical disconnection or connection function, optional air nozzle. Technical parameters or parameters table 1、adapt to the ambient temperature: -40 ℃ ~ +65 ℃. 2、Atmospheric pressure: 70~106Kpa. 3、Axial tension: 〉1000N/1min or more. 4、impact: fiber optic splice box should be able to withstand a drop height of 1m, the mass of the steel ball 1.6Kg, the number of impacts for 3 times the impact. 5、Drop: The fiber optic cable splice box should be able to withstand 3 drops at a height of 1m, and the splice box should not be deformed or damaged after the test, and the internal structure should not be dislodged. 6、 vibration: the splice box to withstand vibration frequency of 10Hz, amplitude of ± 3mm, the number of vibration for 106 vibration, the fiber additional loss change value does not exceed 0.2dB. 7、 voltage strength: 15KV (DC), 1min, no flying arc, no breakdown after the test; 8、Insulation resistance: >2*104 MΩ. 9、fiber radius of curvature > 30mm, fiber fusion tray additional attenuation ≤ 0.01dB. Commonly used tools for construction cross cutter, tape measure. 上一个产品 下一个产品

Product Details All Telecommunication Terminal and Server Electric 上一个产品 下一个产品 GP01-H23 The product is suitable for indoor and outdoor fiber optic cable overhead, wall, building and other straight-through splicing, divergence splicing, fiber optic splitting, etc., using full silicone rubber mechanical seal and can be quickly and repeatedly open the way, the internal structure is reasonably designed, convenient construction operation; mainly used in urban areas, towns, rural fiber optic broadband engineering network, an ideal splitting and splitting fiber splicing box. Application Scenario Outdoor overhead, wall-mounted and other installations, suitable for use at the end of the fiber optic broadband network access network. Structure picture Performance characteristics 1、The shell is made of high-quality engineering plastic injection molding process, with anti-UV and anti-aging additives, high mechanical strength; 2、The box body adopts double-ended optical cable in and out design structure, convenient overhead hanging rod and other openable structure, screw-free box sealing design, quick and easy to repeat opening, no need to replace sealing materials; very convenient for maintenance inspection and other operations; 3、the box adopts the fusion splice tray storage area and fiber into the end access area compartment design, can install 16 SC/UPC type adapters and 1 1 * 16 differential or 2 1 * 8 differential. Technical parameters or parameters table 1、Adapted to the ambient temperature: -40℃~+65℃. 2、Atmospheric pressure: 70~106Kpa. 3、voltage strength: 15KV (DC), 1min, no flying arc, no breakdown after the test; 4、Insulation resistance: >2*104 MΩ. 5、the maximum capacity of fiber optic fusion splicing: 24 cores; 6、the maximum number of fiber into the end: 16 cores, the maximum can be installed splitter: 1 * 16; 7、fiber radius of curvature > 30mm, fiber fusion tray additional attenuation ≤ 0.01dB. Commonly used tools for construction cross cutter, tape measure. 上一个产品 下一个产品

Product Details All Telecommunication Terminal and Server Electric 上一个产品 下一个产品 GP01-H55 The product is suitable for outdoor fiber optic cable overhead straight splice and divergence splice. Double-ended horizontal screw-free fastening small size design structure, the product has high sealing performance, strong corrosion resistance, excellent weather resistance and other characteristics, multi-cable port management, box body and cable mouth are designed with silicone rubber sealing structure, repeatedly open the box and other operations are simple and fast and do not need to replace the sealing materials; reasonable structure layout, construction and operation is simple and fast. Application Scenario Outdoor overhead, pipeline and other common fiber optic cable splice splicing, can be used for urban or urban and rural common fiber optic network splicing protection. Structure picture Performance characteristics 1、The shell is made of high-quality engineering plastic injection molding process, with anti-UV and anti-aging additives, high mechanical strength; 2、The box body adopts double-ended optical cable in and out design structure, convenient overhead hanging rod and other openable structure, screw-free box sealing design, quick and easy to repeat opening, no need to replace sealing materials; very convenient for maintenance inspection and other operations; 3、the box body box cover and optical cable mouth are silicon rubber sealing structure, good airtightness; 4、Box with electrical disconnection or connection function, optional air nozzle. Technical parameters or parameters table 1、Adapted to the ambient temperature: -40℃~+65℃. 2、Atmospheric pressure: 70~106Kpa. 3、Axial tension: 〉1000N/1min or more. 4、impact: fiber optic splice box should be able to withstand a drop height of 1m, the mass of the steel ball 1.6Kg, the number of impacts for 3 times the impact. 5、Drop: The fiber optic cable splice box should be able to withstand 3 drops at a height of 1m, and the splice box should not be deformed or damaged after the test, and the internal structure should not be dislodged. 6、vibration: the splice box to withstand vibration frequency of 10Hz, amplitude of ± 3mm, the number of vibration for 106 vibration, the fiber additional loss change value does not exceed 0.2dB. 7、voltage strength: 15KV (DC), 1min, no flying arc, no breakdown after the test; 8、Insulation resistance: >2*104 MΩ. 9、fiber radius of curvature > 30mm, fiber fusion tray additional attenuation ≤ 0.01dB; 10、Maximum connection capacity of the box: 96 cores. Commonly used tools for construction cross cutter, tape measure. 上一个产品 下一个产品

Product Details All Telecommunication Terminal and Server Electric 上一个产品 下一个产品 GP01-H41 The product is suitable for outdoor optical cable overhead, pipeline and other straight-through connection and divergence and other trunk optical cable and common optical cable network connection. The use of double-ended horizontal screw-free box sealing design structure, the product has high strength mechanical properties, high sealing performance, corrosion resistance, excellent weather resistance, etc., multi-cable port management, can be mechanically repeated to open; reasonable structure layout, construction operation is simple and fast. Application Scenario Outdoor overhead, pipeline and other common fiber optic cable splice splicing, can be used for metropolitan area network backbone, urban or urban and rural common fiber optic network splicing protection. Structure picture Performance characteristics 1、The shell is made of high-quality engineering plastic injection molding process, with anti-UV and anti-aging additives, high mechanical strength; 2、The box body adopts double-ended optical cable in and out design structure, convenient overhead hanging rod and other openable structure, screw-free box sealing design, quick and easy to repeat opening, no need to replace sealing materials; very convenient for maintenance inspection and other operations; 3、the box body box cover and optical cable mouth are silicon rubber sealing structure, good airtightness; 4、Box with electrical disconnection or connection function, optional air nozzle; 5、high-capacity splicing, to meet the trunk or special fiber optic cable splicing protection; 7、termite resistance, acid and alkali resistant oil, resistance to extreme cold and high temperature environment need to order separate instructions. Technical parameters or parameters table 1、Adapted to the ambient temperature: -40℃~+65℃. 2、Atmospheric pressure: 70~106Kpa. 3、Axial tension: 〉1000N/1min or more. 4、flattening: the box is filled with 60 ± 5kpa air pressure, should be able to withstand 2000N/100mm lateral uniform pressure, the force time is not less than 1min, after the test joint box does not leak, no deformation, no damage. 5、impact: fiber optic splice box should be able to withstand a drop height of 1m, the mass of the steel ball 1.6Kg, the number of impacts for 3 times the impact. 6、bending: fiber optic splice box and fiber optic cable joints should be able to withstand bending tension load of 150N, bending angle ± 45 ° of 10 cycles of bending. 7、torsion: fiber optic splice box should be able to withstand a torque of not less than 50N-m, torsion angle ± 90 °, a total of 10 cycles of twisting. 8、Drop: The fiber optic cable connector box should be able to withstand 3 drops at a height of 2.2m, and after the test, the connector box should not leak, no deformation, no damage. 9、tensile strength: 〉2000N/10cm2 pressure, time 1min. 10、vibration: splice box to withstand vibration frequency of 10Hz, amplitude of ± 3mm, the number of vibration for 106 vibration, the fiber additional loss change value does not exceed 0.2dB. 11、Temperature cycle: -40℃~+65℃, internal air pressure 60(+5)Kpa, 10 times cycle, air pressure drop not more than 5kpa after room temperature. 12、fiber radius of curvature > 37.5mm, fiber fusion tray additional attenuation ≤ 0.01dB. Commonly used tools for construction cross cutter, tape measure. 上一个产品 下一个产品

Product Details All Telecommunication Terminal and Server Electric 上一个产品 下一个产品 GJSO3-M1AX-SC-24 24~48C(GP294) The product is suitable for outdoor fiber optic cable overhead, pipeline and other straight splicing and divergence splicing, and with fiber into the end and fiber jumping device; the product has high strength mechanical properties, high sealing performance, corrosion resistance, excellent weather resistance, etc., can be mechanically repeated to open, high maintainability; reasonable structure layout, simple and quick construction operation. Application Scenario Outdoor overhead, pipeline and other common fiber optic cable joint splicing, can be used for urban or urban and rural common fiber optic network splicing protection. Performance characteristics 1、The shell is made of high-quality engineering plastic injection molding process, with anti-UV and anti-aging additives, high mechanical strength; 2、The box body adopts single-ended in and out of the optical cable design structure, easy to install overhead hanging rods and other barrels can be quickly opened for maintenance and repair; no tools are required to open the box body; 3、the shell and the bottom with silicone rubber sealing ring, optical cable mouth using temperature-resistant heat-shrinkable tube sealing, good airtightness; 4、Box with electrical disconnection or connection function, optional air nozzle; 5、compact size, more suitable in the pipeline or narrow space; 6、 with fiber into the end and patching, the number of ports: maximum 24 cores; 7、termite resistance, acid and alkali resistant oil, resistance to extreme cold and high temperature environment need to order separate instructions. Technical parameters or parameters table 1、Adapted to the ambient temperature: -40℃~+65℃. 2、Atmospheric pressure: 70~106Kpa. 3、Axial tension: 〉1000N/1min or more. 4、 flattening: the box is filled with 40 ± 5kpa air pressure, should be able to withstand 2000N/100mm lateral uniform pressure, the force time is not less than 1min, after the test joint box does not leak, no deformation, no damage. 5、 impact: fiber optic splice box should be able to withstand a drop height of 1m, the mass of the steel ball 1.6Kg, the number of impacts for 3 times the impact. 6、 bending: fiber optic splice box and fiber optic cable joints should be able to withstand bending tension load of 150N, bending angle ± 45 ° of 10 cycles of bending. 7、torsion: fiber optic splice box should be able to withstand a torque of not less than 50N-m, torsion angle ± 90 °, a total of 10 cycles of twisting. 8、Drop: The fiber optic cable connector box should be able to withstand 3 drops at a height of 2.2m, and after the test, the connector box should not leak, no deformation, no damage. 9、tensile strength: 〉2000N/10cm2 pressure, time 1min. 10、 vibration: splice box to withstand vibration frequency of 10Hz, amplitude of ± 3mm, the number of vibration for 106 vibration, the fiber additional loss change value does not exceed 0.2dB. 11、Temperature cycle: -40℃~+65℃, internal air pressure 40(+5)Kpa, 10 times cycle, air pressure drop not more than 5kpa after room temperature. 12、fiber radius of curvature > 30mm, fiber fusion tray additional attenuation ≤ 0.01dB. Commonly used tools for construction cross cutters, heaters or spray guns, sawyers, tape measures. Parameter table Model: GJS03-M1AX-144C(GP200) Box material: PP Adapt to the diameter of fiber optic cable: oval hole: 10-25mm; small hole: 6-25mm Number of cable entry ports: 2+4 Maximum capacity of fusion fiber tray (core): 24 Maximum number of fusion cores (cores): 144 Fiber optic residual fiber intake device: No Sealing method: mechanical + heat shrink seal Fiber into the end type and number: -- Product use environment: overhead, pipeline, buried 上一个产品 下一个产品

Product Details All Telecommunication Terminal and Server Electric 上一个产品 下一个产品 GJS03-M8AX-JX-24~144(GP322) The product is suitable for outdoor fiber optic cable overhead, pipeline and other straight-through splicing and divergence splicing. The product has high strength mechanical properties, high sealing performance, corrosion resistance, excellent weather resistance, etc., free of heat-shrinkable mechanical repeated opening, high maintainability; reasonable structure layout, simple and quick construction operation. Application Scenario Outdoor overhead, pipeline, direct buried and other common fiber optic cable joint splicing, can be used for urban or urban and rural common fiber optic network splicing protection. Structure picture Performance characteristics 1、The shell is made of high-quality engineering plastic injection molding process, with anti-UV and anti-aging additives, high mechanical strength; 2、The box body adopts single-ended in and out of the optical cable design structure, easy to install overhead hanging rods and other barrels can be quickly opened for maintenance and repair; no tools are required to open the box body; 3、the shell and the bottom with silicone rubber sealing ring, optical cable mouth using temperature-resistant heat-shrinkable tube sealing, good airtightness; 4、Box with electrical disconnection or connection function, optional air nozzle; 5、high-capacity splicing, to meet the trunk or special fiber optic cable splicing protection; 7、termite resistance, acid and alkali resistant oil, resistance to extreme cold and high temperature environment need to order separate instructions. Technical parameters or parameters table 1、Adapted to the ambient temperature: -40℃~+65℃. 2、Atmospheric pressure: 70~106Kpa. 3、Axial tension: 〉1000N/1min or more. 4、flattening: the box is filled with 40 ± 5kpa air pressure, should be able to withstand 2000N/100mm lateral uniform pressure, the force time is not less than 1min, after the test joint box does not leak, no deformation, no damage. 5、 impact: fiber optic splice box should be able to withstand a drop height of 1m, the mass of the steel ball 1.6Kg, the number of impacts for 3 times the impact. 6、bending: fiber optic splice box and fiber optic cable joints should be able to withstand bending tension load of 150N, bending angle ± 45 ° of 10 cycles of bending. 7、torsion: fiber optic splice box should be able to withstand a torque of not less than 50N-m, torsion angle ± 90 °, a total of 10 cycles of twisting. 8、Drop: The fiber optic cable connector box should be able to withstand 3 drops at a height of 2.2m, and after the test, the connector box should not leak, no deformation, no damage. 9、tensile strength: 〉2000N/10cm2 pressure, time 1min. 10、vibration: splice box to withstand vibration frequency of 10Hz, amplitude of ± 3mm, the number of vibration for 106 vibration, the fiber additional loss change value does not exceed 0.2dB. 11、Temperature cycle: -40℃~+65℃, internal air pressure 40(+5)Kpa, 10 times cycle, air pressure drop not more than 5kpa after room temperature. 12、fiber radius of curvature > 30mm, fiber splice tray additional attenuation ≤ 0.01dB. Commonly used tools for construction cross cutter, tape measure. Parameter table Model: GJS03-M8AX-JX-24~144(GP322) Box material: PP Adapt to the diameter of fiber optic cable oval hole: 10-25mm; small hole: 6-20mm Number of cable entry ports: 2+4 Maximum capacity of fusion fiber tray (core): 24 Maximum number of fusion cores (cores): 144 Fiber optic residual fiber intake device: Yes Sealing method: Mechanical Fiber into the end type and number: -- Product use environment: overhead, pipeline, buried 上一个产品 下一个产品

Product Details All Telecommunication Terminal and Server Electric 上一个产品 下一个产品 GP01-H54 The product is suitable for outdoor fiber optic cable overhead straight splice and divergence splice. Double-ended horizontal screw-free fastening small size design structure, the product has high sealing performance, strong corrosion resistance, excellent weather resistance and other characteristics, multi-cable port management, box body and cable mouth are designed with silicone rubber sealing structure, repeatedly open the box and other operations are simple and fast and do not need to replace the sealing materials; reasonable structure layout, construction and operation is simple and fast. Application Scenario Outdoor overhead, pipeline and other common fiber optic cable joint splicing, can be used for urban or urban and rural common fiber optic network splicing protection. Performance characteristics 1、The shell is produced by injection molding process of high-quality engineering plastics, with anti-UV and anti-aging additives, high mechanical strength; 2、The box body adopts double-ended optical cable in and out design structure, convenient overhead hanging rod and other openable structure, screw-free box sealing design, quick and easy to repeat opening, no need to replace sealing materials; very convenient for maintenance inspection and other operations; 3、the box body box cover and optical cable mouth are silicon rubber sealing structure, good airtightness; 4、Box with electrical disconnection or connection function, optional air nozzle. Technical parameters or parameters table 1、Adapted to the ambient temperature: -40℃~+65℃. 2、Atmospheric pressure: 70~106Kpa. 3、Axial tension: 〉1000N/1min or more. 4、impact: fiber optic splice box should be able to withstand a drop height of 1m, the mass of the steel ball 1.6Kg, the number of impacts for 3 times the impact. 5、Drop: The fiber optic cable splice box should be able to withstand 3 drops at a height of 1m, and the splice box should not be deformed or damaged after the test, and the internal structure should not be dislodged. 6、vibration: the splice box to withstand vibration frequency of 10Hz, amplitude of ± 3mm, the number of vibration for 106 vibration, the fiber additional loss change value does not exceed 0.2dB. 7、voltage strength: 15KV (DC), 1min, no flying arc, no breakdown after the test; 8、Insulation resistance: >2*104 MΩ. 9、fiber radius of curvature > 30mm, fiber fusion tray additional attenuation ≤ 0.01dB; 10、Maximum connection capacity of the box: 48 cores. Commonly used tools for construction cross cutter, tape measure. 上一个产品 下一个产品

Product Details All Telecommunication Terminal and Server Electric 上一个产品 下一个产品 GJS03-M6AX-48C(GP223) The product is suitable for outdoor fiber optic cable overhead, pipeline and other straight-through splicing and divergent splicing, the product has high strength mechanical properties, high sealing performance, strong corrosion resistance, excellent weather resistance, etc., can be mechanically repeated to open, high maintainability; reasonable structure layout, simple and quick construction operation. Application Scenario Outdoor overhead, pipeline and other common fiber optic cable splice splicing, can be used for urban or urban and rural common fiber optic network splicing protection. Structure picture Performance characteristics 1、The shell is produced by injection molding process of high-quality engineering plastics, with anti-UV and anti-aging additives, high mechanical strength; 2、The box body adopts single-ended in and out of the optical cable design structure, easy to install overhead hanging rods and other barrels can be quickly opened for maintenance and repair; no tools are required to open the box body; 3、the shell and the bottom with silicone rubber sealing ring, optical cable mouth using temperature-resistant heat-shrinkable tube sealing, good airtightness; 4、Box with electrical disconnection or connection function, optional air nozzle. Technical parameters or parameters table 1、Adapted to the ambient temperature: -40℃~+65℃. 2、Atmospheric pressure: 70~106Kpa. 3、Axial tension: 〉1000N/1min or more. 4、flattening: the box is filled with 40 ± 5kpa air pressure, should be able to withstand 2000N/100mm lateral uniform pressure, the force time is not less than 1min, after the test joint box does not leak, no deformation, no damage. 5、 impact: fiber optic splice box should be able to withstand a drop height of 1m, the mass of the steel ball 1.6Kg, the number of impacts for 3 times the impact. 6、bending: fiber optic splice box and fiber optic cable joints should be able to withstand bending tension load of 150N, bending angle ± 45 ° of 10 cycles of bending. 7、torsion: fiber optic splice box should be able to withstand a torque of not less than 50N-m, torsion angle ± 90 °, a total of 10 cycles of twisting. 8、Drop: The fiber optic cable connector box should be able to withstand 3 drops at a height of 2.2m, and after the test, the connector box should not leak, no deformation, no damage. 9、tensile strength: 〉2000N/10cm2 pressure, time 1min. 10、vibration: splice box to withstand vibration frequency of 10Hz, amplitude of ± 3mm, the number of vibration for 106 vibration, the fiber additional loss change value does not exceed 0.2dB. 11、Temperature cycle: -40℃~+65℃, internal air pressure 40(+5)Kpa, 10 times cycle, air pressure drop not more than 5kpa after room temperature. 12、fiber radius of curvature > 30mm, fiber splice tray additional attenuation ≤ 0.01dB. Commonly used tools for construction cross cutters, heaters or spray guns, sawyers, tape measures. Parameter table Model: GJS03-M4AX-AL-12-672C(GP321) Box material: PP Adapt to the diameter of fiber optic cable: oval hole: 10-25mm; small hole: 8-30mm Number of cable entry ports: 2+16 Maximum capacity of fusion fiber tray (core): 12 Maximum number of fusion cores (cores): 672 Fiber optic residual fiber intake device: Yes Sealing method: mechanical + heat shrink seal Fiber into the end type and the number of - Product use environment: overhead, pipeline, buried 上一个产品 下一个产品

Product Details All Telecommunication Terminal and Server Electric 上一个产品 下一个产品 GJS03-M1AX-A8-24-96C-N08(GP218) The product is suitable for outdoor optical cable overhead, pipeline and other straight-through splicing and divergence splicing, optical cable to meet the multi-divergence 2 into 8 out optical cable port management. The product has high strength mechanical performance, high sealing performance, strong corrosion resistance, excellent weather resistance, etc., can be mechanically repeated to open, high maintainability; reasonable structure layout, simple and quick construction operation. Application Scenario Outdoor overhead, pipeline, direct buried and other common fiber optic cable joint splicing, can be used for urban or urban and rural common fiber optic network splicing protection. Performance characteristics 1、The shell is produced by injection molding process of high-quality engineering plastics, with anti-UV and anti-aging additives, high mechanical strength; 2、The box body adopts single-ended in and out of the optical cable design structure, easy to install overhead hanging rods and other barrels can be quickly opened for maintenance and repair; no tools are required to open the box body; 3、the shell and the bottom with silicone rubber sealing ring, optical cable mouth using temperature-resistant heat-shrinkable tube sealing, good airtightness; 4、Box with electrical disconnection or connection function, optional air nozzle; 5、compact size, more suitable in the pipeline or narrow space; 6、Multi-divergent structure design with 2-in and 8-out multi-optical cable management; 7、termite resistance, acid and alkali resistant oil, resistance to extreme cold and high temperature environment need to order separate instructions. Technical parameters or parameters table 1、Adapted to the ambient temperature: -40℃~+65℃. 2、Atmospheric pressure: 70~106Kpa. 3、Axial tension: 〉1000N/1min or more. 4、flattening: the box is filled with 40 ± 5kpa air pressure, should be able to withstand 2000N/100mm lateral uniform pressure, the force time is not less than 1min, after the test joint box does not leak, no deformation, no damage. 5、impact: fiber optic splice box should be able to withstand a drop height of 1m, the mass of the steel ball 1.6Kg, the number of impacts for 3 times the impact. 6、bending: fiber optic splice box and fiber optic cable joints should be able to withstand bending tension load of 150N, bending angle ± 45 ° of 10 cycles of bending. 7、torsion: fiber optic splice box should be able to withstand a torque of not less than 50N-m, torsion angle ± 90 °, a total of 10 cycles of twisting. 8、Drop: The fiber optic cable connector box should be able to withstand 3 drops at a height of 2.2m, and after the test, the connector box should not leak, no deformation, no damage. 9、tensile strength: 〉2000N/10cm2 pressure, time 1min. 10、vibration: splice box to withstand vibration frequency of 10Hz, amplitude of ± 3mm, the number of vibration for 106 vibration, the fiber additional loss change value does not exceed 0.2dB. 11、Temperature cycle: -40℃~+65℃, internal air pressure 40(+5)Kpa, 10 times cycle, air pressure drop not more than 5kpa after room temperature. 12、fiber radius of curvature > 30mm, fiber fusion tray additional attenuation ≤ 0.01dB. Commonly used tools for construction cross cutters, heaters or spray guns, sawyers, tape measures. Parameter table Model: GJS03-M1AX-A8-24-96C-N08(GP218) Box material: PP Adapt to the diameter of fiber optic cable oval hole: 10-25mm; small hole: 6-11mm Number of cable entry ports: 2+8 Maximum capacity of fusion fiber tray (core): 24 Maximum number of fusion cores (cores): 96 Fiber optic remnant intake device is Sealing method: mechanical + heat shrink seal Fiber into the end type and number: -- Product use environment: overhead, pipeline, buried 上一个产品 下一个产品