搜索

Product Details All Telecommunication Terminal and Server Electric 上一个产品 下一个产品 GJSO3-M1AX-SC-24 24~48C(GP294) The product is suitable for outdoor fiber optic cable overhead, pipeline and other straight splicing and divergence splicing, and with fiber into the end and fiber jumping device; the product has high strength mechanical properties, high sealing performance, corrosion resistance, excellent weather resistance, etc., can be mechanically repeated to open, high maintainability; reasonable structure layout, simple and quick construction operation. Application Scenario Outdoor overhead, pipeline and other common fiber optic cable joint splicing, can be used for urban or urban and rural common fiber optic network splicing protection. Performance characteristics 1、The shell is made of high-quality engineering plastic injection molding process, with anti-UV and anti-aging additives, high mechanical strength; 2、The box body adopts single-ended in and out of the optical cable design structure, easy to install overhead hanging rods and other barrels can be quickly opened for maintenance and repair; no tools are required to open the box body; 3、the shell and the bottom with silicone rubber sealing ring, optical cable mouth using temperature-resistant heat-shrinkable tube sealing, good airtightness; 4、Box with electrical disconnection or connection function, optional air nozzle; 5、compact size, more suitable in the pipeline or narrow space; 6、 with fiber into the end and patching, the number of ports: maximum 24 cores; 7、termite resistance, acid and alkali resistant oil, resistance to extreme cold and high temperature environment need to order separate instructions. Technical parameters or parameters table 1、Adapted to the ambient temperature: -40℃~+65℃. 2、Atmospheric pressure: 70~106Kpa. 3、Axial tension: 〉1000N/1min or more. 4、 flattening: the box is filled with 40 ± 5kpa air pressure, should be able to withstand 2000N/100mm lateral uniform pressure, the force time is not less than 1min, after the test joint box does not leak, no deformation, no damage. 5、 impact: fiber optic splice box should be able to withstand a drop height of 1m, the mass of the steel ball 1.6Kg, the number of impacts for 3 times the impact. 6、 bending: fiber optic splice box and fiber optic cable joints should be able to withstand bending tension load of 150N, bending angle ± 45 ° of 10 cycles of bending. 7、torsion: fiber optic splice box should be able to withstand a torque of not less than 50N-m, torsion angle ± 90 °, a total of 10 cycles of twisting. 8、Drop: The fiber optic cable connector box should be able to withstand 3 drops at a height of 2.2m, and after the test, the connector box should not leak, no deformation, no damage. 9、tensile strength: 〉2000N/10cm2 pressure, time 1min. 10、 vibration: splice box to withstand vibration frequency of 10Hz, amplitude of ± 3mm, the number of vibration for 106 vibration, the fiber additional loss change value does not exceed 0.2dB. 11、Temperature cycle: -40℃~+65℃, internal air pressure 40(+5)Kpa, 10 times cycle, air pressure drop not more than 5kpa after room temperature. 12、fiber radius of curvature > 30mm, fiber fusion tray additional attenuation ≤ 0.01dB. Commonly used tools for construction cross cutters, heaters or spray guns, sawyers, tape measures. Parameter table Model: GJS03-M1AX-144C(GP200) Box material: PP Adapt to the diameter of fiber optic cable: oval hole: 10-25mm; small hole: 6-25mm Number of cable entry ports: 2+4 Maximum capacity of fusion fiber tray (core): 24 Maximum number of fusion cores (cores): 144 Fiber optic residual fiber intake device: No Sealing method: mechanical + heat shrink seal Fiber into the end type and number: -- Product use environment: overhead, pipeline, buried 上一个产品 下一个产品

Product Details All Telecommunication Terminal and Server Electric 上一个产品 下一个产品 GP01-H33 The product is suitable for indoor and outdoor fiber optic cable overhead, wall, building and other straight-through splicing, divergence splicing, fiber optic splitting, etc., using a full silicone rubber mechanical seal and can be quickly and repeatedly open the way, the fiber optic port design in the bottom of the box body, can realize without opening the box for fiber access function, construction operation is convenient; mainly used in urban areas, towns, villages fiber optic broadband project network, an ideal splitting and splitting fiber splicing box. Application Scenario Outdoor overhead, wall-mounted and other installations, suitable for use at the end of the fiber optic broadband network access network. Structure picture Performance characteristics 1、The shell is made of high-quality engineering plastic injection molding process, with anti-UV and anti-aging additives, high mechanical strength; 2、The box body adopts double-ended optical cable in and out design structure, convenient overhead hanging rod and other openable structure, screw-free box sealing design, quick and easy to repeat opening, no need to replace sealing materials; very convenient for maintenance inspection and other operations; 3、the box adopts the fiber into the end port at the bottom of the box design, without opening the box can access to the user's skin cable, can be installed 16 SC / UPC type adapter and two 1 * 8 or a 1 * 16 mini optical splitter. Technical parameters or parameters table 1、Adapted to the ambient temperature: -40℃~+65℃. 2、Atmospheric pressure: 70~106Kpa. 3、voltage strength: 15KV (DC), 1min, no flying arc, no breakdown after the test; 4、Insulation resistance: >2*104 MΩ. 5、the maximum capacity of fiber optic fusion splicing: 48 cores; 6、the maximum number of fiber into the end: 16 cores, the maximum can be installed splitter: 1 * 16; 7、fiber radius of curvature > 30mm, fiber fusion tray additional attenuation ≤ 0.01dB. Commonly used tools for construction cross cutter, tape measure. 上一个产品 下一个产品

Product Details All Telecommunication Terminal and Server Electric 上一个产品 下一个产品 No-jump fiber optic cable transfer box Fiber optic cable transfer box is an outdoor connection between the backbone and wiring fiber optic cable interface equipment. With the introduction of fixed fiber optic cable, grounding protection, fiber fusion, wiring, storage, route management and other functions, can easily provide link connection, distribution and transmission functions. It is used for the deployment of various application scenarios, and is generally installed in the environment of roadside, community green area, industrial park, building side, electric pole, etc. Widely used in the construction and transformation of telecom operators' basic networks, FTTx, metropolitan area network transmission, etc. No-jumper fiber optic cable transfer box is suitable for FTTH network in the optical distribution point. It can complete the introduction, fixing and stripping protection of optical cable, fusion splicing and protection of optical fiber, storage, parking and routing management of optical splitter pigtails, etc.; it provides direct fusion function of optical fiber and patchless wiring function. It can install box type optical splitter, insert type and other value-added module units according to customers' requirements. Widely used in ODN fiber optic communication network. Product advantages The box is made of SMC polymer material or high quality sheet metal material, with excellent heat insulation performance and IP65 protection level. Full frontal operation, pull-out structure, fusion and wiring integration module operation, easy maintenance. The mooring position is designed to protect the free pigtail end face of the optical split. Provide direct fusion unit for direct fusion operation of fiber optic cable. Suitable for ribbon and bundle fiber optic cable. With reliable optical cable introduction and fixed, protection, grounding device. With a variety of fusion, wiring markings, convenient fusion and wiring records. Reasonable fiber coiling structure, to ensure that the fiber winding radius of any position is greater than 30mm. Optionally, optical splitters can be installed to form a complete fiber optic cable splitting and management system. Allocation and scheduling of fiber is done on the front side; Adopt 12-core fusion and distribution integration module, each connection module can be withdrawn individually, easy to operate; Card mounting FC, SC and other adapters, adapters and the front of the chassis at an oblique angle, not only to ensure the radius of curvature of the jumper, but also to avoid the arc light burns the eyes; External pigtail type, centralized fiber storage type; Plug-in optical splitter method, which can be applied to the primary splitting point of secondary splitting or primary splitting (centralized splitting); Addressing the management and expansion of optical splitters; Applying the concept of skip-free fiber optic cable transfer box to reduce distribution adapters and patching fibers, reduce communication failure points and insertion losses, and enhance network security; Wiring area pigtail fixed length and equipped with an orderly pigtail management center with clear interface; All modular design, on-demand configuration, application flexibility and cost reduction. According to the installation method, there are wall-mounted, overhead and floor-mounted. Comply with YD/T 988 industry standard. Product Type Product usage Widely used in PON technology FTTH fiber access network, is one of the ideal equipment in FTTH construction, can realize the fiber splicing, storage, termination, placement of optical splitter and the deployment of in-home fiber optic cable and other functions. Product application tools Fiber melting machine, power meter, anhydrous ethanol, OTDR tester, wire cutter, diagonal pliers, horizontal ruler, impact drill, screwdriver, bellows, black tape, fireproof mud, optical power meter, pen red light source, etc. Frequently Asked Questions How to confirm the number of cores in the fiber optic cable transfer box? Confirmation according to the design unit drawings. What is the waterproof and dustproof level of the optical cable transfer box? IP65。 Which national standard does the fiber optic cable handover box meet? In line with YD/T 988 industry standard. Is the fiber optic cable transfer box customizable according to demand? Yes. Optical cable transfer box SMC box and stainless steel box selection? The material can be used for more than 10 years, the function is the same, the SMC box price is lower than the price of stainless steel box. 上一个产品 下一个产品

产品详情 全部 通信 终端和服务器 Telecommunication GP01-H60 In-Line Horizontal Fiber Optic Splice Closure The product is suitable for indoor and outdoor fiber optic cable overhead, wall, building and other straight-through connection, divergent connection, fiber optic splitting, etc., using a full silicone rubber mechanical seal and can be quickly and repeatedly open the way, can be installed inside the mini optical splitter, SC-type adapter into the end, the construction operation is convenient; mainly used in urban areas, towns, rural fiber optic broadband engineering network, an ideal splitting and splitting fiber splice box. Application Scenario Outdoor overhead, wall-mounted and other installations, suitable for use at the end of the fiber optic broadband network access network. Structure picture Performance characteristics 1、The shell is produced by injection molding process of high-quality engineering plastics, with anti-UV and anti-aging additives, high mechanical strength; 2、The box body adopts double-ended optical cable in and out design structure, convenient overhead hanging rod and other openable structure, screw-free box sealing design, quick and easy to repeat opening, no need to replace sealing materials; very convenient for maintenance inspection and other operations; 3、The box is designed with 8 SC/UPC end ports, and the lower side of the box is connected to the user's skin cable, which is reserved for the installation of mini optical splitter. Technical parameters or parameters table 1、Adapted to the ambient temperature: -40℃~+65℃. 2、Atmospheric pressure: 70~106Kpa. 3、voltage strength: 15KV (DC), 1min, no flying arc, no breakdown after the test; 4、Insulation resistance: >2*104 MΩ. 5、the maximum capacity of fiber optic fusion splicing: 24 cores; 6、the maximum number of fiber into the end: 8 cores, the maximum can be installed splitter: 1 * 8; 7、fiber radius of curvature > 30mm, fiber fusion tray additional attenuation ≤ 0.01dB. Commonly used tools for construction cross cutter, tape measure. 点击下载产品手册 相关产品 1/7 GP01-H63 In-Line Horizontal Fiber Optic Splice Closure 1/8 GP01-H61 In-Line Horizontal Fiber Optic Splice Closure 1/7 GP01-H55 In-Line Horizontal Fiber Optic Splice Closure 1/6 GP01-H54 In-Line Horizontal Fiber Optic Splice Closure

Product Details All Telecommunication Terminal and Server Electric 上一个产品 下一个产品 Outdoor Cabinets - Equipment Cabinets The equipment cabinet for base station is an outdoor equipment for communication base station to provide related hardware equipment installation, which can install communication integrated main equipment, communication transmission equipment, power supply equipment, ODF, dynamic loop monitoring, etc., and provide temperature control solutions, with safe and reliable, strong anti-theft performance, low noise, good heat dissipation, occupy little space, etc., which can help customers to achieve rapid site selection and rapid deployment, and greatly enhance the communication System platform upgrade support comprehensive service capacity. Product Benefits (1) Small and beautiful, compact housing (less than 0.8 m2/unit) (2) Modular design, with high reliability, simple maintenance, flexible combination according to the different needs of customers (3) Support multi-scene and multi-functional applications (rooftop stations, street stations, suburban stations, operator co-stations, etc (4) Made of high quality hot-dip galvanized sheet with flame retardant material (5) Good insulation effect (PU core not less than 45MM) (6) Low cost of site selection (7) Compatible with multi-vendor devices (8) Support cabinet expansion (9) Intelligent temperature control system (10) Can replace traditional server rooms Product Type Product use (1) Cabinet installation and fixing function: can install fixed IT equipment, servers and other equipment, the main fixing method is 19-inch rack installation, fixed on the U system column, the main frame of the cabinet and U system column design is convenient to install equipment, and the load-bearing capacity is relatively strong, so the cabinet can be installed in all standard equipment (2) Cabinet line management function: the cabinet has a variety of internal line management slot, line management frame, line management board and alignment channel, etc., to provide a very convenient wiring management for a variety of equipment installed inside the cabinet (3) Cabinet protection function: the cabinet is a relatively closed space, the cabinet door can be closed to the internal equipment to play a protective role to prevent damage from the outside, such as rats can be prevented from entering the cabinet inside the equipment or cable into the line damage (4) The cabinet can integrate UPS power supply, power distribution, refrigeration, access control, cabinet, lighting, fire protection, dynamic monitoring, emergency ventilation and other systems, through the monitoring system to complete the integrated management of all subsystems (5) Provide reliable temperature control and regulation system for the full and stable operation of communication transmission equipment (6) Provide reliable grounding protection system for communication transmission equipment and cabinets Product application tools Base station equipment cabinet can be fully applied to business outlets (telecommunications, finance, energy, radio and television, retail) small businesses, large enterprises, government, education, medical branches and networks between the edge of the data center, the use of tools need to be applied to: fusion machine, fiber optic cutting knife, fiber optic tester, pen red light source, optical power meter, dissecting pliers, diagonal pliers, screwdriver, the need to prepare the construction materials are: Anhydrous ethanol, adhesive tape, flexible plastic tape, fireproof mud, corrugated pipe, etc. Frequently Asked Questions Do you support non-standard product customization in addition to the above equipment sizes? Support, customers can put forward specific requirements according to their needs, the company supports non-standard customized products, the internal size of the product can be customized, 19/21 inches can be customized. What is the difference between a base station equipment cabinet and a traditional cabinet? The base station equipment cabinet will be a deep integration of data center infrastructure equipment products, including UPS, power distribution, refrigeration, cabinets, fire protection and other subsystems, through the monitoring system to complete the overall management of all systems, simplifying the design and establishment process, reliable UPS power distribution system, from time to time to protect the IT equipment, while configured with a precision cooling system to ensure normal operation of IT equipment, with dynamic loop monitoring The system monitors the working status of the equipment in real time. Base station equipment cabinets are fully sealed and can be used in a variety of harsh indoor environments, without the need to set up a separate room. What are the advantages of base station equipment cabinet? (1) Compared with the traditional server room, the base station equipment cabinet structure is simpler, factory pre-verification testing compared to on-site construction construction is more standardized, safe and reliable; fully sealed design to eliminate external air dust and corrosive gases on IT equipment; dynamic loop monitoring system to monitor the infrastructure in a comprehensive manner, timely warning of abnormal conditions, security and worry-free. (2) More time-saving and labor-saving construction of the site, the modular design of the product allows the site to be installed and delivered within a day, more than 2 times faster than the traditional construction mode. (3) smaller footprint, a single cabinet covers an area of only 0.6m2 minimum, closed design, strong environmental adaptability, no decoration, flooring and other supporting works, effectively reducing the cost of building the station, fully enclosed refrigeration to enhance the energy efficiency of the whole machine, so that the total cost of ownership significantly reduced. (4) better management, one-stop after-sales service can deal with all kinds of equipment failure problems in a timely manner, saving time and effort; standard with dynamic loop monitoring system, local, remote monitoring and management, more multi-network access to the upper management platform unified supervision, diversified options to support. (5) Integrated and integrated design, integrated cabinet integration of UPS power supply, power distribution, refrigeration, access control, cabinets, lighting, fire, dynamic monitoring, emergency ventilation and many other systems, through the monitoring system to achieve integrated management of all subsystems to create an integrated product, simplify the design, procurement and construction process. 上一个产品 下一个产品

Product Details All Telecommunication Terminal and Server Electric 上一个产品 下一个产品 Product Model:MJ-FBF401-DI Key selling points (1) Support telecom 4G network transmission (2) Can support solar or DC power (3) Built-in speakers, and can support external sound column (4) Human detection, sound and light alarm, regional intrusion alarm (5) Cloud storage support (6) Support two-way intercom (7) Waterproof and dustproof (8) Support human tracking, fixed speed cruise Each main parameter index 上一个产品 下一个产品

Product Details All Telecommunication Terminal and Server Electric 上一个产品 下一个产品 GJS03-M1AX-A8-24~96C(GP204) The product is suitable for outdoor optical cable overhead, pipeline and other straight-through splicing and divergence splicing, optical cable to meet the multi-divergence 2 into 8 out optical cable port management. The product has high strength mechanical performance, high sealing performance, strong corrosion resistance, excellent weather resistance, etc., can be mechanically repeated to open, high maintainability; reasonable structure layout, simple and quick construction operation. Application Scenario Outdoor overhead, pipeline, direct buried and other common fiber optic cable joint splicing, can be used for urban or urban and rural common fiber optic network splicing protection. Structure picture Performance characteristics 1、The shell is made of high-quality engineering plastic injection molding process, with anti-UV and anti-aging additives, high mechanical strength; 2、The box body adopts single-ended in and out of the optical cable design structure, easy to install overhead hanging rods and other barrels can be quickly opened for maintenance and repair; no tools are required to open the box body; 3、the shell and the bottom with silicone rubber sealing ring, optical cable mouth using temperature-resistant heat-shrinkable tube sealing, good airtightness; 4、Box with electrical disconnection or connection function, optional air nozzle; 5、compact size, more suitable in the pipeline or narrow space; 6、Multi-divergent structure design with 2-in and 8-out multi-optical cable management; 7、termite resistance, acid and alkali resistant oil, resistance to extreme cold and high temperature environment need to order separate instructions. Technical parameters or parameters table 1、Adapted to the ambient temperature: -40℃~+65℃. 2、Atmospheric pressure: 70~106Kpa. 3、Axial tension: 〉1000N/1min or more. 4、flattening: the box is filled with 40 ± 5kpa air pressure, should be able to withstand 2000N/100mm lateral uniform pressure, the force time is not less than 1min, after the test joint box does not leak, no deformation, no damage. 5、impact: fiber optic splice box should be able to withstand a drop height of 1m, the mass of the steel ball 1.6Kg, the number of impacts for 3 times the impact. 6、bending: fiber optic splice box and fiber optic cable joints should be able to withstand bending tension load of 150N, bending angle ± 45 ° of 10 cycles of bending. 7、torsion: fiber optic splice box should be able to withstand a torque of not less than 50N-m, torsion angle ± 90 °, a total of 10 cycles of twisting. 8、Drop: The fiber optic cable connector box should be able to withstand 3 drops at a height of 2.2m, and after the test, the connector box should not leak, no deformation, no damage. 9、 tensile strength: 〉2000N/10cm2 pressure, time 1min. 10、 vibration: splice box to withstand vibration frequency of 10Hz, amplitude of ± 3mm, the number of vibration for 106 vibration, the fiber additional loss change value does not exceed 0.2dB. 11、Temperature cycle: -40℃~+65℃, internal air pressure 40(+5)Kpa, 10 times cycle, air pressure drop not more than 5kpa after room temperature. 12、fiber radius of curvature > 30mm, fiber fusion tray additional attenuation ≤ 0.01dB. Commonly used tools for construction cross cutters, heaters or spray guns, sawyers, tape measures. Parameter table Model: GJS03-M1AX-A8-24~96C(GP204) Box material: PP Adapt to the diameter of fiber optic cable oval hole: 10-25mm; small hole: 6-11mm Number of cable entry ports: 2+8 Maximum capacity of fusion fiber tray (core): 24 Maximum number of fusion cores (cores): 96 Fiber optic residual fiber intake device: No Sealing method: mechanical + heat shrink seal Fiber into the end type and number: -- Product use environment: overhead, pipeline, buried 上一个产品 下一个产品

Product Details All Telecommunication Terminal and Server Electric 上一个产品 下一个产品 GJS03-M2AX-A8, SC-24 24~72C-D (GP253) The product is suitable for outdoor optical cable overhead, pipeline and other straight-through splicing and divergence splicing, optical cable to meet the multi-divergence 2 into 8 out optical cable port management. The product has high strength mechanical performance, high sealing performance, strong corrosion resistance, excellent weather resistance, etc., can be mechanically repeated to open, high maintainability; reasonable structure layout, simple and quick construction operation. Application Scenario Outdoor overhead, pipeline and other common fiber optic cable joint splicing, can be used for urban or urban and rural common fiber optic network splicing protection. Performance characteristics 1、The shell is made of high-quality engineering plastic injection molding process, with anti-UV and anti-aging additives, high mechanical strength; 2、The box body adopts single-ended in and out of the optical cable design structure, easy to install overhead hanging rods and other barrels can be quickly opened for maintenance and repair; no tools are required to open the box body; 3、the shell and the bottom with silicone rubber sealing ring, optical cable mouth using temperature-resistant heat-shrinkable tube sealing, good airtightness; 4、Box with electrical disconnection or connection function, optional air nozzle; 5、compact size, more suitable in the pipeline or narrow space; 6、Multi-divergent structure design with 2-in and 8-out multi-optical cable management; 7、termite resistance, acid and alkali resistant oil, resistance to extreme cold and high temperature environment need to order separate instructions. Technical parameters or parameters table 1、Adapted to the ambient temperature: -40℃~+65℃. 2、Atmospheric pressure: 70~106Kpa. 3、Axial tension: 〉1000N/1min or more. 4、flattening: the box is filled with 40 ± 5kpa air pressure, should be able to withstand 2000N/100mm lateral uniform pressure, the force time is not less than 1min, after the test joint box does not leak, no deformation, no damage. 5、 impact: fiber optic splice box should be able to withstand a drop height of 1m, the mass of the steel ball 1.6Kg, the number of impacts for 3 times the impact. 6、bending: fiber optic splice box and fiber optic cable joints should be able to withstand bending tension load of 150N, bending angle ± 45 ° of 10 cycles of bending. 7、torsion: fiber optic splice box should be able to withstand a torque of not less than 50N-m, torsion angle ± 90 °, a total of 10 cycles of twisting. 8、Drop: The fiber optic cable connector box should be able to withstand 3 drops at a height of 2.2m, and after the test, the connector box should not leak, no deformation, no damage. 9、tensile strength: 〉2000N/10cm2 pressure, time 1min. 10、vibration: splice box to withstand vibration frequency of 10Hz, amplitude of ± 3mm, the number of vibration for 106 vibration, the fiber additional loss change value does not exceed 0.2dB. 11、Temperature cycle: -40℃~+65℃, internal air pressure 40(+5)Kpa, 10 times cycle, air pressure drop not more than 5kpa after room temperature. 12、fiber radius of curvature > 30mm, fiber splice tray additional attenuation ≤ 0.01dB. Commonly used tools for construction cross cutters, heaters or spray guns, sawyers, tape measures. Parameter table Model: GJS03-M1AX-144C(GP200) Box material: PP Adapt to the diameter of fiber optic cable: oval hole: 10-25mm; small hole: 6-25mm Number of cable entry ports: 2+4 Maximum capacity of fusion fiber tray (core): 24 Maximum number of fusion cores (cores): 144 Fiber optic residual fiber intake device: No Sealing method: mechanical + heat shrink seal Fiber into the end type and number: -- Product use environment: overhead, pipeline, buried 上一个产品 下一个产品

Product Details All Telecommunication Terminal and Server Electric 上一个产品 下一个产品 GJS03-M4AX-AL-12-672C(GP321) The product is suitable for outdoor large-capacity fiber optic cable overhead, pipeline and other straight-through splicing and divergent splicing, the product has high strength mechanical properties, high sealing performance, strong corrosion resistance, excellent weather resistance, etc., can be mechanically repeated to open, high maintainability; reasonable structure layout, simple and quick construction operation. Application Scenario Outdoor overhead, pipeline, direct buried and other common fiber optic cable joint splicing, can be used for urban or urban and rural common fiber optic network splicing protection. Structure picture Performance characteristics 1、The shell is made of high-quality engineering plastic injection molding process, with anti-UV and anti-aging additives, high mechanical strength; 2、The box body adopts single-ended in and out of the optical cable design structure, easy to install overhead hanging rods and other barrels can be quickly opened for maintenance and repair; no tools are required to open the box body; 3、the shell and the bottom with silicone rubber sealing ring, optical cable mouth using temperature-resistant heat-shrinkable tube sealing, good airtightness; 4、Box with electrical disconnection or connection function, optional air nozzle; 5、compact size, more suitable in the pipeline or narrow space; 6、Anti-termites, acid and alkali resistant oil, resistance to extreme cold and high temperature environments need to be specified separately in the order. Technical parameters or parameters table 1、Adapted to the ambient temperature: -40℃~+65℃. 2、Atmospheric pressure: 70~106Kpa. 3、Axial tension: 〉1000N/1min or more. 4、flattening: the box is filled with 40 ± 5kpa air pressure, should be able to withstand 2000N/100mm lateral uniform pressure, the force time is not less than 1min, after the test joint box does not leak, no deformation, no damage. 5、 impact: fiber optic splice box should be able to withstand a drop height of 1m, the mass of the steel ball 1.6Kg, the number of impacts for 3 times the impact. 6、bending: fiber optic splice box and fiber optic cable joints should be able to withstand bending tension load of 150N, bending angle ± 45 ° of 10 cycles of bending. 7、torsion: fiber optic splice box should be able to withstand a torque of not less than 50N-m, torsion angle ± 90 °, a total of 10 cycles of twisting. 8、Drop: The fiber optic cable connector box should be able to withstand 3 drops at a height of 2.2m, and after the test, the connector box should not leak, no deformation, no damage. 9、tensile strength: 〉2000N/10cm2 pressure, time 1min. 10、vibration: splice box to withstand vibration frequency of 10Hz, amplitude of ± 3mm, the number of vibration for 106 vibration, the fiber additional loss change value does not exceed 0.2dB. 11、Temperature cycle: -40℃~+65℃, internal air pressure 40(+5)Kpa, 10 times cycle, air pressure drop not more than 5kpa after room temperature. 12、fiber radius of curvature > 30mm, fiber splice tray additional attenuation ≤ 0.01dB. Commonly used tools for construction cross cutters, heaters or spray guns, sawyers, tape measures. Parameter table Model: GJS03-M4AX-AL-12-672C(GP321) Box material: PP Adapt to the diameter of fiber optic cable: oval hole: 10-25mm; small hole: 8-30mm Number of cable entry ports: 2+16 Maximum capacity of fusion fiber tray (core): 12 Maximum number of fusion cores (cores): 672 Fiber optic residual fiber intake device: Yes Sealing method: mechanical + heat shrink seal Fiber into the end type and the number of - Product use environment: overhead, pipeline, buried 上一个产品 下一个产品

Product Details All Telecommunication Terminal and Server Electric 上一个产品 下一个产品 GJS03-M3AX-24~288C-TZJ07-III-N15(GP286) The product is suitable for outdoor fiber optic cable overhead, pipeline and other straight-through splicing and divergent splicing, the product has high strength mechanical properties, high sealing performance, strong corrosion resistance, excellent weather resistance, etc., can be mechanically repeated to open, high maintainability; reasonable structure layout, simple and quick construction operation. Application Scenario Outdoor overhead, pipeline, direct buried and other common fiber optic cable joint splicing, can be used for urban or urban and rural common fiber optic network splicing protection. Structure picture Performance characteristics 1、The shell is made of high-quality engineering plastic injection molding process, with anti-UV and anti-aging additives, high mechanical strength; 2、The box body adopts single-ended in and out of the optical cable design structure, easy to install overhead hanging rods and other barrels can be quickly opened for maintenance and repair; no tools are required to open the box body; 3、the shell and the bottom with silicone rubber sealing ring, optical cable mouth using temperature-resistant heat-shrinkable tube sealing, good airtightness; 4、Box with electrical disconnection or connection function, optional air nozzle; 5、compact size, more suitable in the pipeline or narrow space; 6、Anti-termites, acid and alkali resistant oil, resistance to extreme cold and high temperature environments need to be specified separately in the order. Technical parameters or parameters table 1、Adapted to the ambient temperature: -40℃~+65℃. 2、Atmospheric pressure: 70~106Kpa. 3、Axial tension: 〉1000N/1min or more. 4、flattening: the box is filled with 40 ± 5kpa air pressure, should be able to withstand 2000N/100mm lateral uniform pressure, the force time is not less than 1min, after the test joint box does not leak, no deformation, no damage. 5、 impact: fiber optic splice box should be able to withstand a drop height of 1m, the mass of the steel ball 1.6Kg, the number of impacts for 3 times the impact. 6、bending: fiber optic splice box and fiber optic cable joints should be able to withstand bending tension load of 150N, bending angle ± 45 ° of 10 cycles of bending. 7、torsion: fiber optic splice box should be able to withstand a torque of not less than 50N-m, torsion angle ± 90 °, a total of 10 cycles of twisting. 8、Drop: The fiber optic cable connector box should be able to withstand 3 drops at a height of 2.2m, and after the test, the connector box should not leak, no deformation, no damage. 9、tensile strength: 〉2000N/10cm2 pressure, time 1min. 10、vibration: splice box to withstand vibration frequency of 10Hz, amplitude of ± 3mm, the number of vibration for 106 vibration, the fiber additional loss change value does not exceed 0.2dB. 11、Temperature cycle: -40℃~+65℃, internal air pressure 40(+5)Kpa, 10 times cycle, air pressure drop not more than 5kpa after room temperature. 12、fiber radius of curvature > 30mm, fiber splice tray additional attenuation ≤ 0.01dB. Commonly used tools for construction cross cutters, heaters or spray guns, sawyers, tape measures. Parameter table Model: GJS03-M1AX-144C(GP200) Box material: PP Adapt to the diameter of fiber optic cable: oval hole: 10-25mm; small hole: 6-25mm Number of cable entry ports: 2+4 Maximum capacity of fusion fiber tray (core): 24 Maximum number of fusion cores (cores): 144 Fiber optic residual fiber intake device: No Sealing method: mechanical + heat shrink seal Fiber into the end type and number: -- Product use environment: overhead, pipeline, buried 上一个产品 下一个产品