搜索

产品详情 全部 通信 终端和服务器 Telecommunication GP01-H40 In-Line Horizontal Fiber Optic Splice Closure The product is suitable for outdoor fiber optic cable overhead, pipeline and other straight-through splicing and divergence and other trunk fiber optic cable and common fiber optic cable network splicing. Double-ended horizontal design structure, the product has high strength mechanical performance, high sealing performance, corrosion resistance, excellent weather resistance, etc., multi-cable port management, can be mechanically repeated to open; reasonable structure layout, construction operation is simple and fast. Application Scenario Outdoor overhead, pipeline and other common fiber optic cable splice splicing, can be used for urban or urban and rural common fiber optic network splicing protection. Structure picture Performance characteristics 1、The shell is produced by injection molding process of high-quality engineering plastics, with anti-UV and anti-aging additives, high mechanical strength; 2、The box adopts double-ended optical cable in and out design structure, convenient overhead hanging rod and other openable structure; 3、the box body box cover using non-vulcanized rubber sealing structure, good airtightness; 4、Box with electrical disconnection or connection function, optional air nozzle; 5、high-capacity splicing, to meet the trunk or special fiber optic cable splicing protection; 6、The box adopts the layout design of 4-in and 4-out optical cable ports to meet the management of up to 6 optical cables access; 7、termite resistance, acid and alkali resistant oil, resistance to extreme cold and high temperature environment need to order separate instructions. Technical parameters or parameters table 1、Adapted to the ambient temperature: -40℃~+65℃. 2、Atmospheric pressure: 70~106Kpa. 3、Axial tension: 〉1000N/1min or more. 4、flattening: the box is filled with 60 ± 5kpa air pressure, should be able to withstand 2000N/100mm lateral uniform pressure, the force time is not less than 1min, after the test joint box does not leak, no deformation, no damage. 5、impact: fiber optic splice box should be able to withstand a drop height of 1m, the mass of the steel ball 1.6Kg, the number of impacts for 3 times the impact. 6、bending: fiber optic splice box and fiber optic cable joints should be able to withstand bending tension load of 150N, bending angle ± 45 ° of 10 cycles of bending. 7、torsion: fiber optic splice box should be able to withstand a torque of not less than 50N-m, torsion angle ± 90 °, a total of 10 cycles of twisting. 8、Drop: The fiber optic cable connector box should be able to withstand 3 drops at a height of 2.2m, and after the test, the connector box should not leak, no deformation, no damage. 9、tensile strength: 〉2000N/10cm2 pressure, time 1min. 10、vibration: splice box to withstand vibration frequency of 10Hz, amplitude of ± 3mm, the number of vibration for 106 vibration, the fiber additional loss change value does not exceed 0.2dB. 11、Temperature cycle: -40℃~+65℃, internal air pressure 60(+5)Kpa, 10 times cycle, air pressure drop not more than 5kpa after room temperature. 12、fiber radius of curvature > 37.5mm, fiber fusion tray additional attenuation ≤ 0.01dB. Commonly used tools for construction cross cutter, tape measure, hexagonal wrench. 点击下载产品手册 相关产品 1/7 GP01-H63 In-Line Horizontal Fiber Optic Splice Closure 1/8 GP01-H61 In-Line Horizontal Fiber Optic Splice Closure 1/7 GP01-H60 In-Line Horizontal Fiber Optic Splice Closure 1/7 GP01-H55 In-Line Horizontal Fiber Optic Splice Closure

产品详情 全部 通信 终端和服务器 通信 配电单元产品 钣金 通信交直流配电单元是是集中、切换、分配电能的重要设备，广泛应用通信基站机房、室内综合柜、户外柜等通信配电产品中。配电单元一般由盘体、开关（断路器）、保护装置、监视装置、电能计量表等组成。按照电流可以分为交流配电单元、直流配电单元和交直流配电单元；按照电压可以分高压配电单元和低压配电单元。 产品优点 (1) 多路输入、输出可选，交直流可选 (2) 配置灵活，可选择不同的空开配置、数量和电流大小 (3) 交流配电单元内置B或C级防雷，提供防雷保护功能 (4) 配电单元设有完备的接零铜排、接地铜排 (5) 节约安装空间（最低可做到3U高度） (6) 内部接线方便、安全、可靠、美观 (7) 应用范围广，适用于户外柜、综合柜、普通机房、配电箱（柜） 产品类型 交流配电单元正面 直流配电单元 内部结构 背面接零接地汇流 交直流一体式配电单元 产品用途 (1) 交流配电单元安装于室外一体化电源柜或室内综合柜中,其主要作用是引入市电和油机双路电源，并实现手动切换,为开关电源、机柜空调等交流设备提供稳定的电源分配,并具有防雷和保护功能。 (2) 直流配电单元安装于室外─体化综合柜或设备柜中,其主要作用是从开关电源引入直流电源，为本柜中的直流设备提供稳定的电源分配。 (3) 输入电源计量及浪涌保护 (4) 提供维护插座安装位置 产品应用工具 我们的产品应用于室内综合机柜及户外机柜内部进行设备电源集中管理及控制，安装时需要用到螺丝刀，断线钳，剥线钳，压线钳，热风枪等工具。 常见问题解答 我们配电单元的宽度是多少? 我们的配电单元是标准的19英寸宽度，也可根据客户需求定制21英寸宽度。 我们配电单元高度是多少? 我们的配电单元有3U,4U,5U高度，根据不同的使用场景选择不同的安装高度。 我们的配电单元电压等级是多少? 我们的配电单元分为交流AC220V，直流DC-48V常规产品，也可根据客户要求制作直流DC220V及交流AC380V高电压等级的配电单元。 我们配电单元的电流是多大? 我们的配电单元电流一般为交流最大63A，直流最大125A。 我们的配电单元可以做到多少回路? 我们的配电单元最大可以做到单输入21输出或双输入20输出。 产品及应用 户外接入机柜 户外单舱机柜 室内综合机柜 点击下载产品手册 相关产品 1/16 绝缘耐压固定装置（金具） 钣金 1/4 综合机柜 钣金 1/14 光缆终端盒 钣金 1/2 移动智慧厕所 钣金

产品详情 全部 通信 终端和服务器 Telecommunication Expanded capacity fiber optic cable transfer box Sheet Metal With the continuous development of business, the number of fiber optic cable access users also grew rapidly, fiber optic cable transfer box as an important unit of urban backbone ring network management, the expansion of the entire network plays a vital role, for the newly established fiber optic cable transfer box, municipal approval is quite difficult, the construction situation is also more complex. For this reason, combined with years of experience in communication lines, for the operator's network transformation and expansion design, to provide a series of optical cable transfer box in situ transformation and expansion program. On the basis of not interrupting user communications, the full capacity of the cable transfer box in situ in situ expansion, the 144-core cable transfer box seamless expansion to 288-core cable transfer box, the 288-core cable transfer box seamless expansion to 576-core cable transfer box (or 576-core expansion to 1152-core). Solve the problem of full capacity due to the cable transfer box and can not increase access to fiber, while facilitating the installation and maintenance of users. If you directly take the replacement of a larger cable transfer box is not only high cost, long cycle, and to re-connect the fiber optic cable, online users need to interrupt the user communication services, affecting the customer's daily communication needs, resulting in large user opinions, communication losses more. Fiber optic cable transfer box does not interrupt the emergence of communications expansion services, thereby completely solving this long-term problem plaguing the communications maintenance department. Product advantages Solve the problem of difficult new optical interchange and realize the function of expanding optical interchange; - Cost savings by eliminating the need for resources such as new pipelines; Increasing box capacity without interrupting original box operations; The box material is all 304 stainless steel, effectively achieving anti-corrosion performance; Outdoor type with high rainproof performance, rainproof and dustproof grade can reach IP65 or above; Fully modular internal design, configurable on demand and flexible in application; Optimized route management system, clearer marking With a variety of fusion, wiring markings, convenient fusion and wiring records. Reasonable fiber coiling structure, to ensure that the fiber winding radius of any position is greater than 30mm. Adopt 12-core fusion and distribution integrated module, each connection module can be withdrawn individually, easy to operate; adopt fusion and distribution integrated pull-out module, so that the cross-connection box has large capacity and high density; Card mounting FC, SC and other adapters, adapters and the front of the chassis at an oblique angle, not only to ensure the radius of curvature of the jumper, but also to avoid the arc light burns the eyes; Box high-voltage protective grounding and chassis voltage resistance between ≥ 3000V (DC) / 1min, no breakdown, no flying arc; High-voltage protective grounding and chassis insulation resistance: ≥2×104MΩ/500V(DC); Flame retardant performance: up to GB4609/FV-0 level Boxes with safe and reliable optical cable fixing and grounding protection devices. Product Type Double expansion of three: the use of set modification technology, the new box using the front and rear side single door structure (three doors), the side compartments are relatively independent; Side stand expansion: the original cross-over box will be installed directly next to the new cross-over box, open square holes in the side of the cross-over box, connected and sealed with a connection tube (this connection tube to go jumping fiber with), the installation can begin wiring operations; Side expansion, rear expansion: the original handover box shell removed, retaining the previous installation bracket, and re-fixed inside the new box, adding new equipment in the additional space, full frontal operation. Product usage Fiber optic cable transfer box is used for outdoor backbone fiber optic cable and wiring fiber optic cable connection interface equipment, to achieve fiber optic splicing, wiring has a direct connection and cross-connection function. Product application tools Fiber melting machine, power meter, anhydrous ethanol, OTDR tester, wire cutter, fiber cutting knife, diagonal pliers, horizontal ruler, impact drill, screwdriver, bellows, black tape, optical power meter, pen red light source, etc. Frequently Asked Questions What is the waterproof and dustproof level of the optical cable transfer box? IP65。 Is the expansion cable transfer box can be customized according to demand? The expansion of the optical cable transfer box is combined with the actual situation on site and customer demand for custom design. 点击下载产品手册 相关产品 1.png 2.png 1.png 1/2 Traditional fiber optic cable transfer box Sheet Metal 1/14 Fiber optic cable termination box Sheet Metal 1/1 All-in-one fusion tray Sheet Metal 1/2 No-jump fiber optic cable transfer box Sheet Metal

产品详情 全部 通信 终端和服务器 Telecommunication GJS03-M14AX-RS-144C(GP374) Dome Fiber Optic Splice Closure, M 11-14 The product is suitable for outdoor optical cable overhead, pipeline and other straight-through splicing and divergence splicing. The product has the characteristics of high strength mechanical performance, high sealing performance, strong corrosion resistance, excellent weather resistance, etc. It can be mechanically repeatedly opened, high maintainability; reasonable structure layout, simple and quick construction operation. Application Scenario Outdoor overhead, pipeline and other common fiber optic cable joint splicing, can be used for urban or urban and rural common fiber optic network splicing protection. Structure picture Performance characteristics 1、The shell is produced by injection molding process of high-quality engineering plastics, with anti-UV and anti-aging additives, high mechanical strength; 2、The box body adopts the single end in and out of the optical cable design structure, easy to install overhead hanging rods and other barrels can be quickly opened for maintenance and repair; open the box body without tools; 3、the shell and the bottom with silicone rubber sealing ring, optical cable mouth using temperature-resistant heat-shrinkable tube sealing, good airtightness; 4、Box with electrical disconnection or connection function, optional air nozzle. Technical parameters or parameters table 1、Adapted to the ambient temperature: -20℃~+65℃. 2、Atmospheric pressure: 70~106Kpa. 3、Axial tension: 〉1000N/1min or more. 4、flattening: the box is filled with 40 ± 5kpa air pressure, should be able to withstand 2000N/100mm lateral uniform pressure, the force time is not less than 1min, after the test joint box does not leak, no deformation, no damage. 5、impact: fiber optic splice box should be able to withstand a drop height of 1m, the mass of the steel ball 1.6Kg, the number of impacts for 3 times the impact. 6、bending: fiber optic splice box and fiber optic cable joints should be able to withstand bending tension load of 150N, bending angle ± 45 ° of 10 cycles of bending. 7、torsion: fiber optic splice box should be able to withstand a torque of not less than 50N-m, torsion angle ± 90 °, a total of 10 cycles of twisting. 8、Drop: The fiber optic cable connector box should be able to withstand 3 drops at a height of 2.2m, and after the test, the connector box should not leak, no deformation, no damage. 9、tensile strength: 〉2000N/10cm2 pressure, time 1min. 10、vibration: splice box to withstand vibration frequency of 10Hz, amplitude of ± 3mm, the number of vibration for 106 vibration, the fiber additional loss change value does not exceed 0.2dB. 11、Temperature cycle: -20℃~+65℃, internal air pressure 40(+5)Kpa, 10 times cycle, air pressure drop not more than 5kpa after room temperature. 12、fiber radius of curvature > 30mm, fiber fusion tray additional attenuation ≤ 0.01dB. Commonly used tools for construction cross cutter, tape measure, sawyer, heat blower or spray gun. Parameter table Model: GJS03-M14AX-RS-144C(GP374) Box material: PP Adapt to the diameter of fiber optic cable: oval hole: 10-20mm; small hole: 10-30mm Number of cable entry ports: 2+8 Maximum capacity of fusion fiber tray (core): 24 Maximum number of fusion cores (cores): 144 Fiber optic residual fiber intake device: No Sealing method: mechanical + heat shrink seal Fiber into the end type and number: SC/24 Product use environment: overhead, pipeline, buried 点击下载产品手册 相关产品 1/5 GJS03-M15BX-A14-144C-NABS02(GP394) Dome Fiber Optic Splice Closure, M 11-14 1/6 GJS03-M15BX-A14-144C(GP394) Dome Fiber Optic Splice Closure, M 11-14 1/4 GJS03-M15AX-A14-144C-NABS02(GP394) Dome Fiber Optic Splice Closure, M 11-14 1/4 GJS03-M15AX-A14-144C(GP394) Dome Fiber Optic Splice Closure, M 11-14

产品详情 全部 通信 终端和服务器 通信 GP01-H61 卧式光缆接头盒 该产品适用于室外光缆架空、管道等直通接续和分歧等干线光缆和普通光缆网络接续。采用双端卧式设计结构， 本产品具有高强度机械性能、高密封性能、耐腐蚀性强、耐候性优异等特点，多光缆端口管理，可机械重复开启；结构布局合理，施工操作简单快捷。 应用场景 室外架空、管道、直埋等普通光缆接头接续，可用于城区或城乡普通光纤网络接续保护。 结构图 性能特点 1、壳体采用优质工程塑料注塑工艺生产、添加有抗紫外线、耐老化助剂，机械强度高； 2、盒体采用双端进出光缆设计结构、便于架空挂杆等可开启式结构； 3、盒体盒盖采用非硫化橡胶密封结构，气密性良好； 4、盒体具备电气断开或连通功能，可选配气嘴； 5、大容量接续，满足干线或特种光缆接续保护； 7、防白蚁、耐酸碱油、抗极寒和高温环境需订货单独说明。 技术参数 1、适应环境温度：-40℃~+65℃。 2、大气压力：70~106Kpa。 3、轴向拉力：〉1000N/1min以上。 4、压扁：盒内充入60±5kpa气压，应能承受2000N/100mm横向均布压力，加力时间不小于1ｍｉｎ，试验后接头盒不漏气、无变形、无损伤。 5、冲击：光缆接头盒应能承受落高1m、钢球质量1.6Kg，冲击次数为3次的冲击。 6、弯曲：光缆接头盒与光缆接合处应能承受弯曲张力负荷为150N、弯曲角度±45°的10个循环的弯曲。 7、扭转：光缆接头盒应能承受扭矩不小于50N·m，扭转角度±90°，共10次循环的扭转。 8、跌落：光缆接头盒应能承受2.2m高度3次的跌落，试验后接头盒不漏气、无变形、无损伤。 9、抗拉力：〉2000N/10cm2压力，时间1min。 10、震动：接头盒承受振动频率为10Hz、振幅为±3mm、振动次数为106的振动，其光纤附加损耗变化值不超过0.2dB; 11、温度循环：-40℃~+65℃，内部气压60(+5)Kpa,循环次数10次， 常温后气压下降不超过5kpa。 12、光纤曲率半径>37.5mm,光纤熔接盘附加衰耗≤0.01dB。 施工常用工具 十字改刀、卷尺、内六角扳手。 点击下载产品手册 相关产品 1/7 GP01-H63 卧式光缆接头盒 1/7 GP01-H60 卧式光缆接头盒 1/7 GP01-H55 卧式光缆接头盒 1/6 GP01-H54 卧式光缆接头盒

产品详情 全部 通信 终端和服务器 通信 GJS03-M1AX-144C(GP200) 帽式光缆接头盒, M1 该产品适用于室外光缆架空、管道等直通接续和分歧接续。 本产品具有高强度机械性能、高密封性能、耐腐蚀性强、耐候性优异等特点，可机械重复开启，可维护性高；结构布局合理，施工操作简单快捷。 应用场景 室外架空、管道、直埋等普通光缆接头接续，可用于城区或城乡普通光纤网络接续保护。 性能特点： 1、壳体采用优质工程塑料注塑工艺生产、添加有抗紫外线、耐老化助剂，机械强度高； 2、盒体采用单端进出光缆设计结构、便于架空挂杆等安装且筒体可快速开启进行检修和维护；开启盒体无须工具； 3、壳体与底部采用硅橡胶密封圈、光缆口利用耐温热缩管密封，气密性良好； 4、盒体具备电气断开或连通功能，可选配气嘴； 5、体积小巧，在管道或狭小空间更加适用； 6、防白蚁、耐酸碱油、抗极寒和高温环境需订货单独说明。 技术参数 1、适应环境温度：-40℃~+65℃。 2、大气压力：70~106Kpa。 3、轴向拉力：〉1000N/1min以上。 4、压扁：盒内充入40±5kpa气压，应能承受2000N/100mm横向均布压力，加力时间不小于1ｍｉｎ，试验后接头盒不漏气、无变形、无损伤。 5、冲击：光缆接头盒应能承受落高1m、钢球质量1.6Kg，冲击次数为3次的冲击。 6、弯曲：光缆接头盒与光缆接合处应能承受弯曲张力负荷为150N、弯曲角度±45°的10个循环的弯曲。 7、扭转：光缆接头盒应能承受扭矩不小于50N·m，扭转角度±90°，共10次循环的扭转。 8、跌落：光缆接头盒应能承受2.2m高度3次的跌落，试验后接头盒不漏气、无变形、无损伤。 9、抗拉力：〉2000N/10cm2压力，时间1min。 10、震动：接头盒承受振动频率为10Hz、振幅为±3mm、振动次数为106的振动，其光纤附加损耗变化值不超过0.2dB; 11、温度循环：-40℃~+65℃，内部气压40(+5)Kpa,循环次数10次， 常温后气压下降不超过5kpa。 12、光纤曲率半径>30mm,光纤熔接盘附加衰耗≤0.01dB。 施工常用工具 十字改刀、热风机或喷枪、锯工、卷尺。 参数表 型号：GJS03-M1AX-144C(GP200) 盒体材质：PP 适应光缆直径：椭圆孔：10-25mm；小孔：6-25mm 入缆口数：2+4 熔纤盘最大容量(芯）：24 最大熔接芯数(芯）：144 光纤余纤收容装置：否 密封方式：机械+热缩密封 光纤成端类型及数量：--- 产品使用环境：架空、管道、地埋 点击下载产品手册 相关产品 1/3 GJS03-M1AX-A8-144C-W30(GP1416) 帽式光缆接头盒, M1 1/3 GJS03-M1AX-A8，SC-24 24-72C-D(GP297) 帽式光缆接头盒, M1 1/3 GJS03-M1AX-A8-24-96C-N08(GP218) 帽式光缆接头盒, M1 1/4 GJS03-M1AX-A8-24~96C(GP204) 帽式光缆接头盒, M1

厂区中心 关于前宏厂区的详尽介绍 前宏厂区 五大中心 核心技术 主要业务 前宏厂区 前宏生产厂区位于四川成都市新都区新都镇兴业路666号，公司自成立以来，始终按照高起点、高标准地建设和改造生产硬件设施。公司占地30000㎡，拥有员工300+人,其中14人以上为专业工程师且平均工作经验均超过14年，24台金属切割及冲压机器,包括一台德国通快TRUMPF Tru-laser3030和一台TRUMPF Tru-punch 5000，12台金属折弯机器,包括一台意大利SALVAGNINI(S2+P2)。 设有电镀/粉末喷涂中心，模具设计和生产中心拥有46台注塑成型机器，生产力覆盖了塑料注塑,金加工,设备制造,建筑工程,精加工及军工。 五大中心 ㅤ注塑中心ㅤ ㅤ钣金中心ㅤ 机械加工中心 ㅤ热缩中心ㅤ ㅤ实验中心ㅤ 160~170 万件 年产量 0.4+ 万件 日产量 0.15~0.6 mm 产品可成型最小厚度 ≤0.01 mm 注塑精度公差 0.1g~10kg 生成产品能力范围 制胜核心技术 强大的研发人员 自研核心材料配方 先进的自动化设备 材料到成品的 全系检测能力 主要业务 机房组合产品 产品线列头柜、电源柜、配线架、综合机柜、自冷式设备柜，线架等。 终端系列产品 WIFI6、网络监控摄像头、智能门禁系统、智慧农业、智慧校园、智慧安全食堂、智慧小区等。 线路全系产品 LED基站设备柜C-RAN和D-RAN柜、基站拼装柜、光缆交接箱、光缆接头盒、分纤分路箱、金具等。 欢迎随时参观交流 带您领略厂区先进基础设施 了解前宏

产品详情 全部 通信 终端和服务器 Telecommunication GJS03-M2AX-A8-144C (GP1418) Dome Fiber Optic Splice Closure, M 2 The product is suitable for outdoor optical cable overhead, pipeline and other straight-through splicing and divergence splicing, optical cable to meet the multi-divergence 2 into 8 out optical cable port management. The product has high strength mechanical performance, high sealing performance, strong corrosion resistance, excellent weather resistance, etc., can be mechanically repeated to open, high maintainability; reasonable structure layout, simple and quick construction operation. Application Scenario Outdoor overhead, pipeline and other common fiber optic cable joint splicing, can be used for urban or urban and rural common fiber optic network splicing protection. Performance characteristics 1、The shell is made of high-quality engineering plastic injection molding process, with anti-UV and anti-aging additives, high mechanical strength; 2、The box body adopts single-ended in and out of the optical cable design structure, easy to install overhead hanging rods and other barrels can be quickly opened for maintenance and repair; no tools are required to open the box body; 3、the shell and the bottom with silicone rubber sealing ring, optical cable mouth using temperature-resistant heat-shrinkable tube sealing, good airtightness; 4、Box with electrical disconnection or connection function, optional air nozzle; 5、compact size, more suitable in the pipeline or narrow space; 6、Multi-divergent structure design with 2-in and 8-out multi-optical cable management; 7、termite resistance, acid and alkali resistant oil, resistance to extreme cold and high temperature environment need to order separate instructions. Technical parameters or parameters table 1、Adapted to the ambient temperature: -40℃~+65℃. 2、Atmospheric pressure: 70~106Kpa. 3、Axial tension: 〉1000N/1min or more. 4、flattening: the box is filled with 40 ± 5kpa air pressure, should be able to withstand 2000N/100mm lateral uniform pressure, the force time is not less than 1min, after the test joint box does not leak, no deformation, no damage. 5、 impact: fiber optic splice box should be able to withstand a drop height of 1m, the mass of the steel ball 1.6Kg, the number of impacts for 3 times the impact. 6、bending: fiber optic splice box and fiber optic cable joints should be able to withstand bending tension load of 150N, bending angle ± 45 ° of 10 cycles of bending. 7、torsion: fiber optic splice box should be able to withstand a torque of not less than 50N-m, torsion angle ± 90 °, a total of 10 cycles of twisting. 8、Drop: The fiber optic cable connector box should be able to withstand 3 drops at a height of 2.2m, and after the test, the connector box should not leak, no deformation, no damage. 9、tensile strength: 〉2000N/10cm2 pressure, time 1min. 10、vibration: splice box to withstand vibration frequency of 10Hz, amplitude of ± 3mm, the number of vibration for 106 vibration, the fiber additional loss change value does not exceed 0.2dB. 11、Temperature cycle: -40℃~+65℃, internal air pressure 40(+5)Kpa, 10 times cycle, air pressure drop not more than 5kpa after room temperature. 12、fiber radius of curvature > 30mm, fiber splice tray additional attenuation ≤ 0.01dB. Commonly used tools for construction cross cutters, heaters or spray guns, sawyers, tape measures. Parameter table Model: GJS03-M1AX-144C(GP200) Box material: PP Adapt to the diameter of fiber optic cable: oval hole: 10-25mm; small hole: 6-25mm Number of cable entry ports: 2+4 Maximum capacity of fusion fiber tray (core): 24 Maximum number of fusion cores (cores): 144 Fiber optic residual fiber intake device: No Sealing method: mechanical + heat shrink seal Fiber into the end type and number: -- Product use environment: overhead, pipeline, buried 点击下载产品手册 相关产品 1/4 GJS03-M2AX-A8-24~96C-W21(GP1402) Dome Fiber Optic Splice Closure, M 2 1/4 GJS03-M2AX-A8, SC-24 24~72C-D (GP253) Dome Fiber Optic Splice Closure, M 2 1/3 GJS03-M2AX-A8-24~96C-N08(GP241) Dome Fiber Optic Splice Closure, M 2 1/4 GJS03-M2AX-A8-24~96C(GP206) Dome Fiber Optic Splice Closure, M 2

Product Details All Telecommunication Terminal and Server Electric 上一个产品 下一个产品 GP01-H41 The product is suitable for outdoor optical cable overhead, pipeline and other straight-through connection and divergence and other trunk optical cable and common optical cable network connection. The use of double-ended horizontal screw-free box sealing design structure, the product has high strength mechanical properties, high sealing performance, corrosion resistance, excellent weather resistance, etc., multi-cable port management, can be mechanically repeated to open; reasonable structure layout, construction operation is simple and fast. Application Scenario Outdoor overhead, pipeline and other common fiber optic cable splice splicing, can be used for metropolitan area network backbone, urban or urban and rural common fiber optic network splicing protection. Structure picture Performance characteristics 1、The shell is made of high-quality engineering plastic injection molding process, with anti-UV and anti-aging additives, high mechanical strength; 2、The box body adopts double-ended optical cable in and out design structure, convenient overhead hanging rod and other openable structure, screw-free box sealing design, quick and easy to repeat opening, no need to replace sealing materials; very convenient for maintenance inspection and other operations; 3、the box body box cover and optical cable mouth are silicon rubber sealing structure, good airtightness; 4、Box with electrical disconnection or connection function, optional air nozzle; 5、high-capacity splicing, to meet the trunk or special fiber optic cable splicing protection; 7、termite resistance, acid and alkali resistant oil, resistance to extreme cold and high temperature environment need to order separate instructions. Technical parameters or parameters table 1、Adapted to the ambient temperature: -40℃~+65℃. 2、Atmospheric pressure: 70~106Kpa. 3、Axial tension: 〉1000N/1min or more. 4、flattening: the box is filled with 60 ± 5kpa air pressure, should be able to withstand 2000N/100mm lateral uniform pressure, the force time is not less than 1min, after the test joint box does not leak, no deformation, no damage. 5、impact: fiber optic splice box should be able to withstand a drop height of 1m, the mass of the steel ball 1.6Kg, the number of impacts for 3 times the impact. 6、bending: fiber optic splice box and fiber optic cable joints should be able to withstand bending tension load of 150N, bending angle ± 45 ° of 10 cycles of bending. 7、torsion: fiber optic splice box should be able to withstand a torque of not less than 50N-m, torsion angle ± 90 °, a total of 10 cycles of twisting. 8、Drop: The fiber optic cable connector box should be able to withstand 3 drops at a height of 2.2m, and after the test, the connector box should not leak, no deformation, no damage. 9、tensile strength: 〉2000N/10cm2 pressure, time 1min. 10、vibration: splice box to withstand vibration frequency of 10Hz, amplitude of ± 3mm, the number of vibration for 106 vibration, the fiber additional loss change value does not exceed 0.2dB. 11、Temperature cycle: -40℃~+65℃, internal air pressure 60(+5)Kpa, 10 times cycle, air pressure drop not more than 5kpa after room temperature. 12、fiber radius of curvature > 37.5mm, fiber fusion tray additional attenuation ≤ 0.01dB. Commonly used tools for construction cross cutter, tape measure. 上一个产品 下一个产品

Product Details All Telecommunication Terminal and Server Electric 上一个产品 下一个产品 GJS03-M5AX-RS-AL-288C(GP304) The product is suitable for outdoor large-capacity fiber optic cable overhead, pipeline and other straight-through splicing and divergent splicing, the product has high strength mechanical properties, high sealing performance, strong corrosion resistance, excellent weather resistance, etc., can be mechanically repeated to open, high maintainability; reasonable structure layout, simple and quick construction operation. Application Scenario Outdoor overhead, pipeline and other common fiber optic cable splice splicing, can be used for urban or urban and rural common fiber optic network splicing protection. Structure picture Performance characteristics 1、The shell is made of high-quality engineering plastic injection molding process, with anti-UV and anti-aging additives, high mechanical strength; 2、The box body adopts single-ended in and out of the optical cable design structure, easy to install overhead hanging rods and other barrels can be quickly opened for maintenance and repair; no tools are required to open the box body; 3、the shell and the bottom with silicone rubber sealing ring, optical cable mouth using temperature-resistant heat-shrinkable tube sealing, good airtightness; 4、Box with electrical disconnection or connection function, optional air nozzle; 5、compact size, more suitable in the pipeline or narrow space; 6、Anti-termites, acid and alkali resistant oil, resistance to extreme cold and high temperature environments need to be specified separately in the order. Technical parameters or parameters table 1、Adapted to the ambient temperature: -40℃~+65℃. 2、Atmospheric pressure: 70~106Kpa. 3、Axial tension: 〉1000N/1min or more. 4、flattening: the box is filled with 40 ± 5kpa air pressure, should be able to withstand 2000N/100mm lateral uniform pressure, the force time is not less than 1min, after the test joint box does not leak, no deformation, no damage. 5、 impact: fiber optic splice box should be able to withstand a drop height of 1m, the mass of the steel ball 1.6Kg, the number of impacts for 3 times the impact. 6、bending: fiber optic splice box and fiber optic cable joints should be able to withstand bending tension load of 150N, bending angle ± 45 ° of 10 cycles of bending. 7、torsion: fiber optic splice box should be able to withstand a torque of not less than 50N-m, torsion angle ± 90 °, a total of 10 cycles of twisting. 8、Drop: The fiber optic cable connector box should be able to withstand 3 drops at a height of 2.2m, and after the test, the connector box should not leak, no deformation, no damage. 9、tensile strength: 〉2000N/10cm2 pressure, time 1min. 10、vibration: splice box to withstand vibration frequency of 10Hz, amplitude of ± 3mm, the number of vibration for 106 vibration, the fiber additional loss change value does not exceed 0.2dB. 11、Temperature cycle: -40℃~+65℃, internal air pressure 40(+5)Kpa, 10 times cycle, air pressure drop not more than 5kpa after room temperature. 12、fiber radius of curvature > 30mm, fiber splice tray additional attenuation ≤ 0.01dB. Commonly used tools for construction cross cutters, heaters or spray guns, sawyers, tape measures. Parameter table Model: GJS03-M4AX-AL-12-672C(GP321) Box material: PP Adapt to the diameter of fiber optic cable: oval hole: 10-25mm; small hole: 8-30mm Number of cable entry ports: 2+16 Maximum capacity of fusion fiber tray (core): 12 Maximum number of fusion cores (cores): 672 Fiber optic residual fiber intake device: Yes Sealing method: mechanical + heat shrink seal Fiber into the end type and the number of - Product use environment: overhead, pipeline, buried 上一个产品 下一个产品