搜索

产品详情 全部 通信 终端和服务器 通信 MODF架 钣金 光纤配线系列产品适用于中心局、光交节点、用户光纤接入网工程中各光接入点，完成光缆的引入、固定、开剥保护，光纤的熔接及保护，尾纤的存储及管理，光纤的固定连接及交叉连接的等功能，根据功能可分为线路侧光纤配线架、设备侧光纤配线架与光纤总配线架。 光纤总配线架集成了线路侧和设备侧ODF功能，具备高密度及灵活配线的特点，提高对光纤的有效管理和保护，满足传输机房、接入机房大量出局光缆的集中管理要求。网络集中化维护，节约维护成本，提高维护的规范水平和维护质量。 光纤总配线架是线路侧连接室外光缆、设备侧连接光线路终端或传输设备、可通过跳纤调度光缆中的纤芯序号及改变光传输系统的路序，且具有光缆固定与保护装置和测试端口。光纤总配线架分为开放式和封闭式两种结构。 产品优点 (1) 引用MDF总配线架管理模式：正面线路侧，背面设备侧，延续现有维护人员习惯； (2) 线路侧采用72芯熔接配线单元箱设计，设备侧采用96芯适配器旋转面板配线单元箱设计，操作方便； (3) “傻瓜式”路由：同一侧面逐层导入、逐层分流，方便操作维护、管理； (4) 架体有独立的多层光纤槽道，减少机房槽道压力，方便调度管理； (5) 可定制跳纤长度，减少光纤跳纤冗余和缠绕； (6) 线缆在架内实行分区管理，可实现立体无交叉跳纤路由； (7) 设有光缆存储装置，可存储光缆余长，左侧成端光缆，右侧存储跳纤。 产品类型 开放式MODF机架 开发式MODF机架结构采用双面架结构，横、直列机架由若干个熔配一体单元框和跳纤框组成，在横列单元中间可适当分布水平通道。直列机架采用72芯单元框加12芯熔配一体化托盘组成，横列机架采用96芯跳纤框。MODF架直列架侧又称为线路侧，用于外线光缆的集中熔接和成端，横列侧又称为设备侧，用于内线设备光纤的分配、调度。 封闭式MODF机架 封闭式MODF机架结构和开放式结构相同，只是在架体上安装有前后门和侧板，同样横、直列机架由若干个熔配一体单元框和跳纤框组成，在横列单元中间可适当分布水平通道。直列机架采用72芯单元框加12芯熔配一体化托盘组成，横列机架采用96芯跳纤框组成。横列侧和直列侧原理和开放式MODF一致。 光总配线架配置表 产品用途 光缆熔接、成端、连接、调度和存储 (1) 线路侧可用于光纤通信系统中局端主干光缆的成端和分配。 (2) 线路侧可方便地实现光纤线路的连接、分配、调度和存储。 (3) 设备侧是完成通信机房内不同光通信设备的连接、调度、调试等功能 (4) 同时能完成线路端和设备端的跳线富余长度的存储功能的一种光纤配线架。 产品应用工具 熔纤机、光缆切割刀、OTDR测试仪、笔式红光源、剥线钳、功率计、无水乙醇、光纤切割刀、斜口钳、水平尺、冲击钻、螺丝刀、光功率计。 常见问题解答 怎么判断现场选择封闭式还是敞开式MODF架？ 整排机架需要横向走纤连接的采用敞开式MODF架，不需要横向走纤连接的可选用封闭式MODF架。 产品的尺寸规格选择的依据是？ 在选择产品的尺寸时一般几个方面的考虑；1.是根据机房安装位置左右其他机柜的规格，选择相同或相近规格这样能保证视觉上的统一；2.根据安装位置的尺寸来定机架规格；3.根据所需要的芯数来选择。以上几点需要同时考虑。 产品适配器种类怎么选择-FC还是SC？ 根据机房里其他配套使用的设备所配适配器的种类来选择。 怎么判断机架使用带状纤还是束状纤？ 根据使用的光缆来选择，带状光缆则选择带状尾纤，束状光缆选择束状尾纤。 机架的颜色怎么选择？ 机架的颜色根据机房里面其他设备的颜色做到统一、美观。 点击下载产品手册 相关产品 1/16 绝缘耐压固定装置（金具） 钣金 1/4 综合机柜 钣金 1/14 光缆终端盒 钣金 1/2 移动智慧厕所 钣金

产品详情 全部 通信 终端和服务器 Telecommunication GP01-H32 In-Line Horizontal Fiber Optic Splice Closure The product is suitable for indoor and outdoor optical cable overhead, wall, building and other straight-through splicing, divergence splicing, fiber optic splitting, etc., using full silicone rubber mechanical sealing and can be quickly and repeatedly opened, optional mini optical splitter, box type optical splitter and insert type optical splitter, screw-free box sealing structure, open the cover and sealing operation is simple and fast, convenient construction operation; mainly used in urban areas, towns and villages fiber optic broadband project network It is an ideal optical splitter and fiber splice box. Application Scenario Outdoor overhead, wall-mounted and other installations, suitable for use at the end of the fiber optic broadband network access network. Structure picture Performance characteristics 1、The shell is produced by injection molding process of high-quality engineering plastics, with anti-UV and anti-aging additives, high mechanical strength; 2、The box body adopts double-ended optical cable in and out design structure, convenient overhead hanging rod and other openable structure, screw-free box sealing design, quick and easy to repeat opening, no need to replace sealing materials; very convenient for maintenance inspection and other operations; 3、 the box is designed with 16 SC / UPC into the end of the port, both sides of the box out of the user leather cable, reserved for the installation of differential or inserted optical splitter. Technical parameters or parameters table 1、Adapted to the ambient temperature: -40℃~+65℃. 2、Atmospheric pressure: 70~106Kpa. 3、voltage strength: 15KV (DC), 1min, no flying arc, no breakdown after the test; 4、Insulation resistance: >2*104 MΩ. 5、the maximum capacity of fiber optic fusion splicing: 48 cores; 6、the maximum number of fiber into the end: 16 cores, the maximum can be installed splitter: 1 * 16; 7、fiber radius of curvature > 30mm, fiber fusion tray additional attenuation ≤ 0.01dB. Commonly used tools for construction cross cutter, tape measure. 点击下载产品手册 相关产品 1/7 GP01-H63 In-Line Horizontal Fiber Optic Splice Closure 1/8 GP01-H61 In-Line Horizontal Fiber Optic Splice Closure 1/7 GP01-H60 In-Line Horizontal Fiber Optic Splice Closure 1/7 GP01-H55 In-Line Horizontal Fiber Optic Splice Closure

产品详情 全部 通信 终端和服务器 通信 网络机柜 钣金 网络机柜，广泛应用于安装、放置ETIS标准设备以及19″、21″标准设备的系统集成，为系统设备提供可靠的安装、支撑、供电、通风装置，并对系统设备进行有效的保护。 网络机柜是完成外线电缆与程控交换机之间、数字复用设备与数字复用设备之间、外线光缆与光通信设备之间连接的综合设备，适用于计算机、数据、信息、电子、金融、电力电气等各行业工程控制系统的集成。 产品优点 兼容性：支持所有19″、21″标准设备安装 散热性能：高密度网孔门，通风率达80% 稳定的结构设计：静态负载1800kg 可扩展性：标配并柜组件，支持带侧板与不带侧板机柜并排安装 高可用性：垂直安装脚轮可动态调节，满足不同安装深度设备 优良通风性：集成通风系统，专业的气流组织设计 进出线便利：线缆管理专用通道，可按任意选择进线方式 进风方式可选：可实现上进风、下进风以及前进风三种进风方式 接地保护设计:机柜内设置多点接地 可拆卸式：可快速拆卸的前、后门、侧门设计 产品类型 产品用途 (1) 一般用在网络布线间，楼层配线间，中心机房，数据机房，控制中心，监控室，监控中心等； (2) 可以大大提升机房整体的美观程度。以19英寸规范机柜为例，19英寸的设计可容纳大量网络设备，可以简化机房的布局，整体提升机房的美观程度； (3) 可以有效保障设备的安全性和稳定性。设备工作时会散发大量热量，网络机柜的散热风扇可将设备散发的热量送出机柜外，确保设备安全稳定的运行。 产品应用工具 本产品主要搭载多种网络设备，安装的过程中使用启子、扳手即可。 常见问题解答 网络机柜和服务器机柜有什么不同？ 通常，网络机柜的深度小于等于800毫米，而服务器机柜的深度大于等于800毫米。 其次，服务器机柜一般是用来安装服务器、显示器或UPS等设备，为电子设备提供良好的工作环境。而网络机柜主要是用来安装路由器、交换机、光纤配线箱、光纤适配器等设备。 网络机柜可以用木制置物架代替吗？ 不可以。网络机柜的作用是放置网络设备，从这一功能来看，普通的木制置物架也能起到同样的作用，但不同的是，网络机柜的设计更合理、更科学，是专门为存放网络设备而设计的，有的还具有增强电磁屏蔽、降低工作噪音等功能，普通的置物架起不到这样的作用。 网络机柜如何布线？ 网络机柜布线时与理线架或配线箱一起搭配使用；网络机柜是用来安装交换机等设备的，由于网络机柜空间较大，安装的设备较多，因此网络机柜里的线缆数量将会不少，考虑到垂直和水平方向线缆的固定，网络机柜布线时可与垂直理线架和水平理线架搭配使用，若是应用在40G/100G网络环境中，则可以与超高密度光纤配线箱搭配使用。另外，为了方便网络机柜中的线缆管理，我们可以利用扎线带将线缆分类进行捆绑固定。 网络机柜如何保养？ 避光、防尘、机柜内压力控制、空间控制都可以延长网络机柜使用寿命。 点击下载产品手册 相关产品 1/16 绝缘耐压固定装置（金具） 钣金 1/4 综合机柜 钣金 1/14 光缆终端盒 钣金 1/2 移动智慧厕所 钣金

产品详情 全部 通信 终端和服务器 Terminal and Server 4 million intelligent car recorder QH-DX01 Spring Promotion Cameras Key selling points (1) P2P Plug and Play (2) HD picture quality 2560*1440 30FPS (3) Using the latest H.265 encoding compression technology (4) Support cell phone APP remote monitoring (5) Support cell phone download video (6) Support WiFi, Telecom 4G card Each main parameter index Product key parameters 点击下载产品手册 相关产品 1/2 4 million intelligent indoor dome camera QH-ESF401-PI Spring Promotion Cameras

产品详情 全部 通信 终端和服务器 Telecommunication GJS03-M3AX-24~288C-TZJ07-III-N15(GP286) Dome Fiber Optic Splice Closure, M 3 The product is suitable for outdoor fiber optic cable overhead, pipeline and other straight-through splicing and divergent splicing, the product has high strength mechanical properties, high sealing performance, strong corrosion resistance, excellent weather resistance, etc., can be mechanically repeated to open, high maintainability; reasonable structure layout, simple and quick construction operation. Application Scenario Outdoor overhead, pipeline, direct buried and other common fiber optic cable joint splicing, can be used for urban or urban and rural common fiber optic network splicing protection. Structure picture Performance characteristics 1、The shell is made of high-quality engineering plastic injection molding process, with anti-UV and anti-aging additives, high mechanical strength; 2、The box body adopts single-ended in and out of the optical cable design structure, easy to install overhead hanging rods and other barrels can be quickly opened for maintenance and repair; no tools are required to open the box body; 3、the shell and the bottom with silicone rubber sealing ring, optical cable mouth using temperature-resistant heat-shrinkable tube sealing, good airtightness; 4、Box with electrical disconnection or connection function, optional air nozzle; 5、compact size, more suitable in the pipeline or narrow space; 6、Anti-termites, acid and alkali resistant oil, resistance to extreme cold and high temperature environments need to be specified separately in the order. Technical parameters or parameters table 1、Adapted to the ambient temperature: -40℃~+65℃. 2、Atmospheric pressure: 70~106Kpa. 3、Axial tension: 〉1000N/1min or more. 4、flattening: the box is filled with 40 ± 5kpa air pressure, should be able to withstand 2000N/100mm lateral uniform pressure, the force time is not less than 1min, after the test joint box does not leak, no deformation, no damage. 5、 impact: fiber optic splice box should be able to withstand a drop height of 1m, the mass of the steel ball 1.6Kg, the number of impacts for 3 times the impact. 6、bending: fiber optic splice box and fiber optic cable joints should be able to withstand bending tension load of 150N, bending angle ± 45 ° of 10 cycles of bending. 7、torsion: fiber optic splice box should be able to withstand a torque of not less than 50N-m, torsion angle ± 90 °, a total of 10 cycles of twisting. 8、Drop: The fiber optic cable connector box should be able to withstand 3 drops at a height of 2.2m, and after the test, the connector box should not leak, no deformation, no damage. 9、tensile strength: 〉2000N/10cm2 pressure, time 1min. 10、vibration: splice box to withstand vibration frequency of 10Hz, amplitude of ± 3mm, the number of vibration for 106 vibration, the fiber additional loss change value does not exceed 0.2dB. 11、Temperature cycle: -40℃~+65℃, internal air pressure 40(+5)Kpa, 10 times cycle, air pressure drop not more than 5kpa after room temperature. 12、fiber radius of curvature > 30mm, fiber splice tray additional attenuation ≤ 0.01dB. Commonly used tools for construction cross cutters, heaters or spray guns, sawyers, tape measures. Parameter table Model: GJS03-M1AX-144C(GP200) Box material: PP Adapt to the diameter of fiber optic cable: oval hole: 10-25mm; small hole: 6-25mm Number of cable entry ports: 2+4 Maximum capacity of fusion fiber tray (core): 24 Maximum number of fusion cores (cores): 144 Fiber optic residual fiber intake device: No Sealing method: mechanical + heat shrink seal Fiber into the end type and number: -- Product use environment: overhead, pipeline, buried 点击下载产品手册 相关产品 1/4 GJS03-M3AX-216C-W01 (GP211) Dome Fiber Optic Splice Closure, M 3

Product Details All Telecommunication Terminal and Server Electric 上一个产品 下一个产品 GJS03-M15AX-A14-144C-NABS02(GP394) The product is suitable for outdoor fiber optic cable overhead, pipeline and other straight-through splicing and divergence splicing. This product has high strength mechanical properties, high sealing performance, corrosion resistance, excellent weather resistance, etc., multi-cable port management, can be mechanically repeated to open, high maintainability; reasonable structure layout, simple and fast construction operation. Application Scenario Outdoor overhead, pipeline and other common fiber optic cable splice splicing, can be used for urban or urban and rural common fiber optic network splicing protection. Performance characteristics 1、The shell is produced by injection molding process of high-quality engineering plastics, with anti-UV and anti-aging additives, high mechanical strength; 2、The box body adopts the single end in and out of the optical cable design structure, easy to install overhead hanging rods and other barrels can be quickly opened for maintenance and repair; open the box body without tools; 3、the shell and the bottom with silicone rubber sealing ring, optical cable mouth using temperature-resistant heat-shrinkable tube sealing, good airtightness; 4、Box with electrical disconnection or connection function, optional air nozzle. Technical parameters or parameters table 1、Adapted to the ambient temperature: -20℃~+65℃. 2、Atmospheric pressure: 70~106Kpa. 3、Axial tension: 〉1000N/1min or more. 4、flattening: the box is filled with 40 ± 5kpa air pressure, should be able to withstand 2000N/100mm lateral uniform pressure, the force time is not less than 1min, after the test joint box does not leak, no deformation, no damage. 5、impact: fiber optic splice box should be able to withstand a drop height of 1m, the mass of the steel ball 1.6Kg, the number of impacts for 3 times the impact. 6、bending: fiber optic splice box and fiber optic cable joints should be able to withstand bending tension load of 150N, bending angle ± 45 ° of 10 cycles of bending. 7、torsion: fiber optic splice box should be able to withstand a torque of not less than 50N-m, torsion angle ± 90 °, a total of 10 cycles of twisting. 8、Drop: The fiber optic cable connector box should be able to withstand 3 drops at a height of 2.2m, and after the test, the connector box should not leak, no deformation, no damage. 9、tensile strength: 〉2000N/10cm2 pressure, time 1min. 10、vibration: splice box to withstand vibration frequency of 10Hz, amplitude of ± 3mm, the number of vibration for 106 vibration, the fiber additional loss change value does not exceed 0.2dB. 11、Temperature cycle: -20℃~+65℃, internal air pressure 40(+5)Kpa, 10 times cycle, air pressure drop not more than 5kpa after room temperature. 12、fiber radius of curvature > 30mm, fiber fusion tray additional attenuation ≤ 0.01dB. Commonly used tools for construction cross cutter, tape measure, sawyer, heat blower or spray gun. Parameter table Model: GJS03-M14AX-RS-144C(GP374) Box material: PP Adapt to the diameter of fiber optic cable: oval hole: 10-20mm; small hole: 10-30mm Number of cable entry ports: 2+8 Maximum capacity of fusion fiber tray (core): 24 Maximum number of fusion cores (cores): 144 Fiber optic residual fiber intake device: No Sealing method: mechanical + heat shrink seal Fiber into the end type and number: SC/24 Product use environment: overhead, pipeline, buried 上一个产品 下一个产品

Product Details All Telecommunication Terminal and Server Electric 上一个产品 下一个产品 GP01-H55 The product is suitable for outdoor fiber optic cable overhead straight splice and divergence splice. Double-ended horizontal screw-free fastening small size design structure, the product has high sealing performance, strong corrosion resistance, excellent weather resistance and other characteristics, multi-cable port management, box body and cable mouth are designed with silicone rubber sealing structure, repeatedly open the box and other operations are simple and fast and do not need to replace the sealing materials; reasonable structure layout, construction and operation is simple and fast. Application Scenario Outdoor overhead, pipeline and other common fiber optic cable splice splicing, can be used for urban or urban and rural common fiber optic network splicing protection. Structure picture Performance characteristics 1、The shell is made of high-quality engineering plastic injection molding process, with anti-UV and anti-aging additives, high mechanical strength; 2、The box body adopts double-ended optical cable in and out design structure, convenient overhead hanging rod and other openable structure, screw-free box sealing design, quick and easy to repeat opening, no need to replace sealing materials; very convenient for maintenance inspection and other operations; 3、the box body box cover and optical cable mouth are silicon rubber sealing structure, good airtightness; 4、Box with electrical disconnection or connection function, optional air nozzle. Technical parameters or parameters table 1、Adapted to the ambient temperature: -40℃~+65℃. 2、Atmospheric pressure: 70~106Kpa. 3、Axial tension: 〉1000N/1min or more. 4、impact: fiber optic splice box should be able to withstand a drop height of 1m, the mass of the steel ball 1.6Kg, the number of impacts for 3 times the impact. 5、Drop: The fiber optic cable splice box should be able to withstand 3 drops at a height of 1m, and the splice box should not be deformed or damaged after the test, and the internal structure should not be dislodged. 6、vibration: the splice box to withstand vibration frequency of 10Hz, amplitude of ± 3mm, the number of vibration for 106 vibration, the fiber additional loss change value does not exceed 0.2dB. 7、voltage strength: 15KV (DC), 1min, no flying arc, no breakdown after the test; 8、Insulation resistance: >2*104 MΩ. 9、fiber radius of curvature > 30mm, fiber fusion tray additional attenuation ≤ 0.01dB; 10、Maximum connection capacity of the box: 96 cores. Commonly used tools for construction cross cutter, tape measure. 上一个产品 下一个产品

产品详情 全部 通信 终端和服务器 通信 GJSO3-M1AX-144C-SRZJ14(GP1444) 帽式光缆接头盒, M1 该产品适用于室外光缆架空、管道等直通接续和分歧接续。 本产品具有高强度机械性能、高密封性能、耐腐蚀性强、耐候性优异等特点，可机械重复开启，可维护性高；结构布局合理，施工操作简单快捷。 应用场景 室外架空、管道、直埋等普通光缆接头接续，可用于城区或城乡普通光纤网络接续保护。 性能特点： 1、壳体采用优质工程塑料注塑工艺生产、添加有抗紫外线、耐老化助剂，机械强度高； 2、盒体采用单端进出光缆设计结构、便于架空挂杆等安装且筒体可快速开启进行检修和维护；开启盒体无须工具； 3、壳体与底部采用硅橡胶密封圈、光缆口利用耐温热缩管密封，气密性良好； 4、盒体具备电气断开或连通功能，可选配气嘴； 5、体积小巧，在管道或狭小空间更加适用； 6、防白蚁、耐酸碱油、抗极寒和高温环境需订货单独说明； 技术参数 1、适应环境温度：-40℃~+65℃。 2、大气压力：70~106Kpa。 3、轴向拉力：〉1000N/1min以上。 4、压扁：盒内充入40±5kpa气压，应能承受2000N/100mm横向均布压力，加力时间不小于1ｍｉｎ，试验后接头盒不漏气、无变形、无损伤。 5、冲击：光缆接头盒应能承受落高1m、钢球质量1.6Kg，冲击次数为3次的冲击。 6、弯曲：光缆接头盒与光缆接合处应能承受弯曲张力负荷为150N、弯曲角度±45°的10个循环的弯曲。 7、扭转：光缆接头盒应能承受扭矩不小于50N·m，扭转角度±90°，共10次循环的扭转。 8、跌落：光缆接头盒应能承受2.2m高度3次的跌落，试验后接头盒不漏气、无变形、无损伤。 9、抗拉力：〉2000N/10cm2压力，时间1min。 10、震动：接头盒承受振动频率为10Hz、振幅为±3mm、振动次数为106的振动，其光纤附加损耗变化值不超过0.2dB; 11、温度循环：-40℃~+65℃，内部气压40(+5)Kpa,循环次数10次， 常温后气压下降不超过5kpa。 12、光纤曲率半径>30mm,光纤熔接盘附加衰耗≤0.01dB。 施工常用工具 十字改刀、热风机或喷枪、锯工、卷尺。 参数表 型号：GJSO3-M1AX-144C-SRZJ14(GP1444) 盒体材质：PP 适应光缆直径椭圆孔：10-25mm；小孔：6-25mm 入缆口数：2+4 熔纤盘最大容量(芯）：24 最大熔接芯数(芯）：144 光纤余纤收容装置：否 密封方式：机械+热缩密封 光纤成端类型及数量：--- 产品使用环境：架空、管道、地埋 点击下载产品手册 相关产品 1/3 GJS03-M1AX-A8-144C-W30(GP1416) 帽式光缆接头盒, M1 1/3 GJS03-M1AX-A8，SC-24 24-72C-D(GP297) 帽式光缆接头盒, M1 1/3 GJS03-M1AX-A8-24-96C-N08(GP218) 帽式光缆接头盒, M1 1/4 GJS03-M1AX-A8-24~96C(GP204) 帽式光缆接头盒, M1

Product Details All Telecommunication Terminal and Server Electric 上一个产品 下一个产品 GJS03-M15AX-A14-144C(GP394) The product is suitable for outdoor fiber optic cable overhead, pipeline and other straight-through splicing and divergence splicing. This product has high strength mechanical properties, high sealing performance, corrosion resistance, excellent weather resistance, etc., multi-cable port management, can be mechanically repeated to open, high maintainability; reasonable structure layout, simple and fast construction operation. Application Scenario Outdoor overhead, pipeline and other common fiber optic cable splice splicing, can be used for urban or urban and rural common fiber optic network splicing protection. Performance characteristics 1、The shell is produced by injection molding process of high-quality engineering plastics, with anti-UV and anti-aging additives, high mechanical strength; 2、The box body adopts the single end in and out of the optical cable design structure, easy to install overhead hanging rods and other barrels can be quickly opened for maintenance and repair; open the box body without tools; 3、the shell and the bottom with silicone rubber sealing ring, optical cable mouth using temperature-resistant heat-shrinkable tube sealing, good airtightness; 4、Box with electrical disconnection or connection function, optional air nozzle. Technical parameters or parameters table 1、Adapted to the ambient temperature: -20℃~+65℃. 2、Atmospheric pressure: 70~106Kpa. 3、Axial tension: 〉1000N/1min or more. 4、flattening: the box is filled with 40 ± 5kpa air pressure, should be able to withstand 2000N/100mm lateral uniform pressure, the force time is not less than 1min, after the test joint box does not leak, no deformation, no damage. 5、impact: fiber optic splice box should be able to withstand a drop height of 1m, the mass of the steel ball 1.6Kg, the number of impacts for 3 times the impact. 6、bending: fiber optic splice box and fiber optic cable joints should be able to withstand bending tension load of 150N, bending angle ± 45 ° of 10 cycles of bending. 7、torsion: fiber optic splice box should be able to withstand a torque of not less than 50N-m, torsion angle ± 90 °, a total of 10 cycles of twisting. 8、Drop: The fiber optic cable connector box should be able to withstand 3 drops at a height of 2.2m, and after the test, the connector box should not leak, no deformation, no damage. 9、tensile strength: 〉2000N/10cm2 pressure, time 1min. 10、vibration: splice box to withstand vibration frequency of 10Hz, amplitude of ± 3mm, the number of vibration for 106 vibration, the fiber additional loss change value does not exceed 0.2dB. 11、Temperature cycle: -20℃~+65℃, internal air pressure 40(+5)Kpa, 10 times cycle, air pressure drop not more than 5kpa after room temperature. 12、fiber radius of curvature > 30mm, fiber fusion tray additional attenuation ≤ 0.01dB. Commonly used tools for construction cross cutter, tape measure, sawyer, heat blower or spray gun. Parameter table Model: GJS03-M14AX-RS-144C(GP374) Box material: PP Adapt to the diameter of fiber optic cable: oval hole: 10-20mm; small hole: 10-30mm Number of cable entry ports: 2+8 Maximum capacity of fusion fiber tray (core): 24 Maximum number of fusion cores (cores): 144 Fiber optic residual fiber intake device: No Sealing method: mechanical + heat shrink seal Fiber into the end type and number: SC/24 Product use environment: overhead, pipeline, buried 上一个产品 下一个产品

产品详情 全部 通信 终端和服务器 通信 GJS03-M11AX-4/16-24~96C(GP341) 帽式光缆接头盒, M11-14 该产品适用于室外光缆分纤分光的光纤入户工程。 本产品具有高强度机械性能、高密封性能、耐腐蚀性强、耐候性优异等特点，可机械重复开启，可维护性高；结构布局合理，施工操作简单快捷。 应用场景 室外架空、挂墙等安装、适用于光纤宽带网络接入网末端使用。 结构图 性能特点： 1、壳体采用优质工程塑料注塑工艺生产、添加有抗紫外线、耐老化助剂，机械强度高； 2、盒体采用单端进出光缆设计结构、便于架空挂杆等安装且筒体可快速开启进行检修和维护；开启盒体无须工具； 3、壳体与底部采用硅橡胶密封圈。 技术参数 1、适应环境温度：-40℃~+65℃。 2、大气压力：70~106Kpa。 3、光纤曲率半径>37.5mm,光纤熔接盘附加衰耗≤0.01dB； 4、具备光纤成端及熔接；可带微型光分路器最大1:16。 施工常用工具 十字改刀、卷尺。 参数表 型号：GJS03-M11AX-4/16-24~96C(GP341) 盒体材质：PP 适应光缆直径：椭圆孔：10-20mm；小孔：皮线 光缆入缆口数：2+16 熔纤盘最大容量(芯）：24 最大熔接芯数(芯）：96 光纤余纤收容装置：否 密封方式：机械 光纤成端类型及数量：SC/16(可配微型光分路器） 产品使用环境：架空、管道、地埋 点击下载产品手册 相关产品 1/5 GJS03-M15BX-A14-144C-NABS02（GP394） 帽式光缆接头盒, M11-14 1/6 GJS03-M15BX-A14-144C（GP394） 帽式光缆接头盒, M11-14 1/4 GJS03-M15AX-A14-144C-NABS02（GP394） 帽式光缆接头盒, M11-14 1/4 GJS03-M15AX-A14-144C（GP394） 帽式光缆接头盒, M11-14