搜索

产品详情 全部 通信 终端和服务器 Telecommunication GP01-H42 In-Line Horizontal Fiber Optic Splice Closure The product is suitable for outdoor fiber optic cable overhead, pipeline and other straight-through splicing and divergence and other trunk fiber optic cable and common fiber optic cable network splicing. The use of double-ended horizontal design structure, the product has a high strength mechanical performance, high sealing performance, corrosion resistance, excellent weather resistance, etc., multi-cable port management, can be mechanically repeated to open; reasonable structure layout, construction operation is simple and fast. Application Scenario Outdoor overhead, pipeline, direct buried and other common fiber optic cable splice splicing, can be used for metropolitan area network backbone, urban or urban and rural common fiber optic network splicing protection. Structure picture Performance characteristics 1、The shell is made of high-quality engineering plastic injection molding process, with anti-UV and anti-aging additives, high mechanical strength; 2、The box adopts double-ended optical cable in and out design structure, convenient overhead hanging rod and other openable structure; 3、the box body box cover using non-vulcanized rubber sealing structure, good airtightness; 4、Box with electrical disconnection or connection function, optional air nozzle; 5、high-capacity splicing, to meet the trunk or special fiber optic cable splicing protection; 7、termite resistance, acid and alkali resistant oil, resistance to extreme cold and high temperature environment need to order separate instructions. Technical parameters or parameters table 1、Adapted to the ambient temperature: -40℃~+65℃. 2、Atmospheric pressure: 70~106Kpa. 3、Axial tension: 〉1000N/1min or more. 4、flattening: the box is filled with 60 ± 5kpa air pressure, should be able to withstand 2000N/100mm lateral uniform pressure, the force time is not less than 1min, after the test joint box does not leak, no deformation, no damage. 5、impact: fiber optic splice box should be able to withstand a drop height of 1m, the mass of the steel ball 1.6Kg, the number of impacts for 3 times the impact. 6、bending: fiber optic splice box and fiber optic cable joints should be able to withstand bending tension load of 150N, bending angle ± 45 ° of 10 cycles of bending. 7、torsion: fiber optic splice box should be able to withstand a torque of not less than 50N-m, torsion angle ± 90 °, a total of 10 cycles of twisting. 8、Drop: The fiber optic cable connector box should be able to withstand 3 drops at a height of 2.2m, and after the test, the connector box should not leak, no deformation, no damage. 9、tensile strength: 〉2000N/10cm2 pressure, time 1min. 10、vibration: splice box to withstand vibration frequency of 10Hz, amplitude of ± 3mm, the number of vibration for 106 vibration, the fiber additional loss change value does not exceed 0.2dB. 11、Temperature cycle: -40℃~+65℃, internal air pressure 60(+5)Kpa, 10 times cycle, air pressure drop not more than 5kpa after room temperature. 12、fiber radius of curvature > 37.5mm, fiber fusion tray additional attenuation ≤ 0.01dB. Commonly used tools for construction cross cutter, tape measure. 点击下载产品手册 相关产品 1/7 GP01-H63 In-Line Horizontal Fiber Optic Splice Closure 1/8 GP01-H61 In-Line Horizontal Fiber Optic Splice Closure 1/7 GP01-H60 In-Line Horizontal Fiber Optic Splice Closure 1/7 GP01-H55 In-Line Horizontal Fiber Optic Splice Closure

产品详情 全部 通信 终端和服务器 Telecommunication GJS03-M9AX-24~144C(GP317) Dome Fiber Optic Splice Closure, M 9 The product is suitable for outdoor optical cable overhead, pipeline and other straight-through splicing and divergence splicing. The product has the characteristics of high strength mechanical performance, high sealing performance, strong corrosion resistance, excellent weather resistance, etc. It can be mechanically repeatedly opened, high maintainability; reasonable structure layout, simple and quick construction operation. Application Scenario Outdoor overhead, pipeline, direct buried and other common fiber optic cable joint splicing, can be used for urban or urban and rural common fiber optic network splicing protection. Structure picture Performance characteristics 1、The shell is made of high-quality engineering plastic injection molding process, with anti-UV and anti-aging additives, high mechanical strength; 2、The box body adopts single-ended in and out of the optical cable design structure, easy to install overhead hanging rods and other barrels can be quickly opened for maintenance and repair; no tools are required to open the box body; 3、the shell and the bottom with silicone rubber sealing ring, optical cable mouth using temperature-resistant heat-shrinkable tube sealing, good airtightness; 4、Box with electrical disconnection or connection function, optional air nozzle; 5、high-capacity splicing, to meet the trunk or special fiber optic cable splicing protection; 7、 termite resistance, acid and alkali resistant oil, resistance to extreme cold and high temperature environment need to order separate instructions. Technical parameters or parameters table 1、Adapted to the ambient temperature: -40℃~+65℃. 2、Atmospheric pressure: 70~106Kpa. 3、Axial tension: 〉1000N/1min or more. 4、flattening: the box is filled with 40 ± 5kpa air pressure, should be able to withstand 2000N/100mm lateral uniform pressure, the force time is not less than 1min, after the test joint box does not leak, no deformation, no damage. 5、 impact: fiber optic splice box should be able to withstand a drop height of 1m, the mass of the steel ball 1.6Kg, the number of impacts for 3 times the impact. 6、bending: fiber optic splice box and fiber optic cable joints should be able to withstand bending tension load of 150N, bending angle ± 45 ° of 10 cycles of bending. 7、torsion: fiber optic splice box should be able to withstand a torque of not less than 50N-m, torsion angle ± 90 °, a total of 10 cycles of twisting. 8、Drop: The fiber optic cable connector box should be able to withstand 3 drops at a height of 2.2m, and after the test, the connector box should not leak, no deformation, no damage. 9、tensile strength: 〉2000N/10cm2 pressure, time 1min. 10、vibration: splice box to withstand vibration frequency of 10Hz, amplitude of ± 3mm, the number of vibration for 106 vibration, the fiber additional loss change value does not exceed 0.2dB. 11、Temperature cycle: -40℃~+65℃, internal air pressure 40(+5)Kpa, 10 times cycle, air pressure drop not more than 5kpa after room temperature. 12、fiber radius of curvature > 30mm, fiber splice tray additional attenuation ≤ 0.01dB. Commonly used tools for construction cross cutters, heaters or spray guns, sawyers, tape measures. Parameter table Model: GJS03-M9AX-24~144C(GP317) Box material: PP Adapt to the diameter of fiber optic cable oval hole: 10-25mm; small hole: 6-25mm Number of cable entry ports: 2+6 Maximum capacity of fusion fiber tray (core): 24 Maximum number of fusion cores (cores): 144 Fiber optic residual fiber intake device: Yes Sealing method: mechanical + heat shrink seal Fiber into the end type and number: -- Product use environment: overhead, pipeline, buried 点击下载产品手册 相关产品 1/6 GJS03-M9AX-RS-288C-SRZJ21-W12(GP1423) Dome Fiber Optic Splice Closure, M 9 1/5 GJS03-M9AX-JX-288C-SRZJ21-W12(GP1425) Dome Fiber Optic Splice Closure, M 9

产品详情 全部 通信 终端和服务器 通信 GP01-H54 卧式光缆接头盒 该产品适用于室外光缆架空直通接续和分歧接续。采用双端卧式免螺钉紧固小尺寸设计结构， 本产品具有高密封性能、耐腐蚀性强、耐候性优异等特点，多光缆端口管理，盒体及光缆口均采用硅橡胶密封结构设计，重复开启盒体等操作简单快捷且无须更换密封材料；结构布局合理，施工操作简单快捷。 应用场景 室外架空、管道等普通光缆接头接续，可用于城区或城乡普通光纤网络接续保护。 性能特点 1、壳体采用优质工程塑料注塑工艺生产、添加有抗紫外线、耐老化助剂，机械强度高； 2、盒体采用双端进出光缆设计结构、便于架空挂杆等可开启式结构，免螺钉盒体密封设计，重复开启快捷方便，无须更换密封材料；对维护检查等操作非常便捷； 3、盒体盒盖及光缆口均采用硅橡胶密封结构，气密性良好； 4、盒体具备电气断开或连通功能，可选配气嘴。 技术参数 1、适应环境温度：-40℃~+65℃。 2、大气压力：70~106Kpa。 3、轴向拉力：〉1000N/1min以上。 4、冲击：光缆接头盒应能承受落高1m、钢球质量1.6Kg，冲击次数为3次的冲击。 5、跌落：光缆接头盒应能承受1m高度3次的跌落，试验后接头盒不变形、无破损、内部结构无脱落。 6、震动：接头盒承受振动频率为10Hz、振幅为±3mm、振动次数为106的振动，其光纤附加损耗变化值不超过0.2dB; 7、耐电压强度：15KV(DC),1min，试验后无飞弧、不击穿； 8、绝缘电阻：>2*104MΩ; 9、光纤曲率半径>30mm,光纤熔接盘附加衰耗≤0.01dB； 10、盒体最大接续容量：48芯。 施工常用工具 十字改刀、卷尺。 点击下载产品手册 相关产品 1/7 GP01-H63 卧式光缆接头盒 1/8 GP01-H61 卧式光缆接头盒 1/7 GP01-H60 卧式光缆接头盒 1/7 GP01-H55 卧式光缆接头盒

产品详情 全部 通信 终端和服务器 Telecommunication GP01-H54 In-Line Horizontal Fiber Optic Splice Closure The product is suitable for outdoor fiber optic cable overhead straight splice and divergence splice. Double-ended horizontal screw-free fastening small size design structure, the product has high sealing performance, strong corrosion resistance, excellent weather resistance and other characteristics, multi-cable port management, box body and cable mouth are designed with silicone rubber sealing structure, repeatedly open the box and other operations are simple and fast and do not need to replace the sealing materials; reasonable structure layout, construction and operation is simple and fast. Application Scenario Outdoor overhead, pipeline and other common fiber optic cable joint splicing, can be used for urban or urban and rural common fiber optic network splicing protection. Performance characteristics 1、The shell is produced by injection molding process of high-quality engineering plastics, with anti-UV and anti-aging additives, high mechanical strength; 2、The box body adopts double-ended optical cable in and out design structure, convenient overhead hanging rod and other openable structure, screw-free box sealing design, quick and easy to repeat opening, no need to replace sealing materials; very convenient for maintenance inspection and other operations; 3、the box body box cover and optical cable mouth are silicon rubber sealing structure, good airtightness; 4、Box with electrical disconnection or connection function, optional air nozzle. Technical parameters or parameters table 1、Adapted to the ambient temperature: -40℃~+65℃. 2、Atmospheric pressure: 70~106Kpa. 3、Axial tension: 〉1000N/1min or more. 4、impact: fiber optic splice box should be able to withstand a drop height of 1m, the mass of the steel ball 1.6Kg, the number of impacts for 3 times the impact. 5、Drop: The fiber optic cable splice box should be able to withstand 3 drops at a height of 1m, and the splice box should not be deformed or damaged after the test, and the internal structure should not be dislodged. 6、vibration: the splice box to withstand vibration frequency of 10Hz, amplitude of ± 3mm, the number of vibration for 106 vibration, the fiber additional loss change value does not exceed 0.2dB. 7、voltage strength: 15KV (DC), 1min, no flying arc, no breakdown after the test; 8、Insulation resistance: >2*104 MΩ. 9、fiber radius of curvature > 30mm, fiber fusion tray additional attenuation ≤ 0.01dB; 10、Maximum connection capacity of the box: 48 cores. Commonly used tools for construction cross cutter, tape measure. 点击下载产品手册 相关产品 1/7 GP01-H63 In-Line Horizontal Fiber Optic Splice Closure 1/8 GP01-H61 In-Line Horizontal Fiber Optic Splice Closure 1/7 GP01-H60 In-Line Horizontal Fiber Optic Splice Closure 1/7 GP01-H55 In-Line Horizontal Fiber Optic Splice Closure

产品详情 全部 通信 终端和服务器 通信 GP01-H15 卧式光缆接头盒 该产品适用于室外光缆架空、管道等直通接续和分歧等干线光缆和普通光缆网络接续。采用双端卧式设计结构， 本产品具有高强度机械性能、高密封性能、耐腐蚀性强、耐候性优异等特点，多光缆端口管理，可机械重复开启；结构布局合理，施工操作简单快捷。 应用场景 室外架空、管道、直埋等普通光缆接头接续，可用于城域网骨干网络、城区或城乡普通光纤网络接续保护。 结构图 性能特点 1、壳体采用优质工程塑料注塑工艺生产、添加有抗紫外线、耐老化助剂，机械强度高； 2、盒体采用双端进出光缆设计结构、便于架空挂杆等可开启式结构； 3、盒体盒盖采用非硫化橡胶密封结构，气密性良好； 4、盒体具备电气断开或连通功能，可选配气嘴； 5、大容量接续，满足干线或特种光缆接续保护； 6、防白蚁、耐酸碱油、抗极寒和高温环境需订货单独说明。 技术参数 1、适应环境温度：-40℃~+65℃。 2、大气压力：70~106Kpa。 3、轴向拉力：〉1000N/1min以上。 4、压扁：盒内充入60±5kpa气压，应能承受2000N/100mm横向均布压力，加力时间不小于1ｍｉｎ，试验后接头盒不漏气、无变形、无损伤。 5、冲击：光缆接头盒应能承受落高1m、钢球质量1.6Kg，冲击次数为3次的冲击。 6、弯曲：光缆接头盒与光缆接合处应能承受弯曲张力负荷为150N、弯曲角度±45°的10个循环的弯曲。 7、扭转：光缆接头盒应能承受扭矩不小于50N·m，扭转角度±90°，共10次循环的扭转。 8、跌落：光缆接头盒应能承受2.2m高度3次的跌落，试验后接头盒不漏气、无变形、无损伤。 9、抗拉力：〉2000N/10cm2压力，时间1min。 10、震动：接头盒承受振动频率为10Hz、振幅为±3mm、振动次数为106的振动，其光纤附加损耗变化值不超过0.2dB; 11、温度循环：-40℃~+65℃，内部气压60(+5)Kpa,循环次数10次， 常温后气压下降不超过5kpa。 12、光纤曲率半径>37.5mm,光纤熔接盘附加衰耗≤0.01dB。 施工常用工具 十字改刀、内六角扳手、卷尺。 点击下载产品手册 相关产品 1/7 GP01-H63 卧式光缆接头盒 1/8 GP01-H61 卧式光缆接头盒 1/7 GP01-H60 卧式光缆接头盒 1/7 GP01-H55 卧式光缆接头盒

产品详情 全部 通信 终端和服务器 Telecommunication Medium wall thickness heat shrinkable round tube series Shrinkable Round Tube Medium wall heat shrinkable round tube is produced from cross-linked polyethylene material through melt extrusion, irradiation, expansion, glue coating and other processing, with excellent insulation, high strength, strong resistance to environmental corrosion, radiation resistance, aging resistance, etc., high shrinkage times ratio, a wide range of applicable scenes. Application Scenarios 1、Mainly used in the insulation protection of terminals or intermediate joints of medium and low-voltage power cables, insulation protection of various busbars; 2, communication cable joint protection and optical cable joint box sealing protection. Performance Features 1、Starting shrinkage temperature: ≥ +70℃ 2、Complete shrinkage temperature: ≥ +125℃ 3、Use temperature: -45℃~+110℃ 4、UV resistance, wear-resistant 5、Environmental standards: RoHS 6、Heat shrinkage ratio: >3:1 7、Standard color: black (other colors can be customized) Technical parameters Performance Indicators Test Methods Tensile strength ≥ 12 Mpa ASTM D 2671 Elongation at break ≥300% ASTM D 2671 Strength after aging ≥ 8.4 Mpa 158℃×168h Elongation at break after aging ≥200% 158℃×168h Axial variation rate -8%~+8% ASTM D 2671 Breakdown strength ≥20kV/mm IEC 60243 Volume resistivity ≥1014 Ω-cm IEC 60093 Mmonly used tools for construction tape measure, flame gun or hot air gun. Parameters table 点击下载产品手册 相关产品

产品详情 全部 通信 终端和服务器 通信 户外机柜—五舱综合柜 钣金 基站用五舱综合柜是为通信基站及其相关设备提供安装空间并提供不间断电源的专用柜体，机柜将传统宏基站基带处理单元(BBU)和射频处理单元(RRU)分离，BBU和RRU之间按照协议通过光纤连接，完成基带数据的传输，在网络部署时实现“BBU集中设置，RRU拉远覆盖”的功能，并对其覆盖的区域进行统一管理和动态分配，提升资源利用率，降低能耗，同时通过对协助化技术的有效支持从而提升网络性能，配置主干光缆连接，通过光纤资源连接与分配，充分整合传输网、接入网资源优势，构建固移融合的5G网络架构，有效解决无线、有线接入综合多场景应用需求，为未来5G传输网络下沉，数据边缘计算等应用作准备，机柜可以服务于多个基站、微站及连接下一个三舱机柜，组成一个环状光传输网络，为各种无线网点提供灵活、分布式的网络连接，主要应用于5G骨干网络节点、传输网综合业务区的建设和维护，并为整个产品提供一整套温控解决方案，具有安全可靠、防盗性能强、噪音低、散热效果好、占用空间小等特点，可帮助客户实现快速选址建站、快速部署，极大提升通信系统平台升级配套的综合服务能力。 产品优点 (1) 小型集成化：产品外形尺寸高*宽*深：2200*3200*1200，占地约为3.85㎡） (2) 模块化设计：具备高可靠性，维护简单，可根据客户差异需求，灵活组合 (3) 集中化：可以大大减少机房的数量，从而减少建设及运维成本，实现配套资源的有效共享 (4) 安全性：可靠的供配电系统和后备电池，动环控制及监控系统，保障设备的运行安全 (5) 节能化：大量节省基站空调及配套设施，减少了能耗和排放，降低大量基站导致高额能耗 (6) 协作化：减少基站间干扰，改善小区边缘覆盖，提供更高的频谱效率和更好的用户体验 (7) 虚拟化：基于通用平台的无线，接入网构架集中资源，多模式运营 (8) 支持多场景，多功能应用（楼顶站、街边站、郊区站、运营商共站等） (9) 优质热镀锌板加阻燃性材料制作而成，良好的保温效果（PU芯材不小于45MM），户外防水等级IP55 (10) 选点建站成本低可与OCC融合建站 (11) 兼容性强，可支持多种设备及电池的安装 产品类型 一体化五舱综合机柜属于一款综合性产品，产品融合了传统的机房业务及OCC业务，产品已经整合了相关联的各功能，在无特殊要求的情况下请选择公司推荐的产品规格类型。 产品用途 (1) 机柜的安装固定功能：可安装固定IT设备、服务器等设备和电池，设备主要固定方式为19英寸机架式安装，固定在U制立柱上，机柜的主框架及U制立柱设计方便安装设备，且承重能力比较强，所以机柜内可安装所有标准设备，电池可支持直放或者19英寸机架式安装，并可同时开展相关OCC业务，可支持光缆熔接配线也可实现跳接功能 (2) 机柜的理线功能：机柜内部有各种理线槽、理线架、理线板及走线通道等，给机柜内部安装的各种设备提供非常方便的布线管理 (3) 机柜的保护功能：机柜是一个相对封闭的空间，柜门关闭后可以给内部设备起到保护作用防止来自外部的损坏等，比如可以防止老鼠进入机柜里面对设备或线缆进线破坏 (4) 机柜可整合UPS电源、配电、制冷、门禁、机柜、照明、消防、动环监控、应急通风，OCC等多个系统，经过监控系统对全部子系统完成统筹管理 (5) 为通讯传输设备全稳定运行提供可靠的温控调节系统 (6) 为通讯传输设备及柜体提供可靠的接地保护系统 产品应用工具 一体化五舱综合机柜可充分应用于营业网点（电信,金融,能源,广电,零售）小型企业,大型企业,政府,教育,医疗的分支机构和网络间边缘数据中心，使用时需要应用到的工具有：熔纤机，光纤切割刀，光纤测试仪，笔式红光源，光功率计，剖线钳，斜口钳，螺丝刀，需要准备的施工物料有：无水乙醇，胶布，软塑带，防火泥，波纹管等。 常见问题解答 除上述设备尺寸外支持非标产品定制吗? 原则此款五舱综合机柜建议使用公司现有尺寸，因为经过长期的测试使用验证，五舱柜的标准配置已能完全满足相关业务的开展，如客户有其它特殊要求也可支持特殊化定制。 一体化五舱机柜综合柜与传统的机柜有何区别吗? 一体化机柜将数据中心基础设备产品深度整合，包含UPS、配电、制冷、机柜、消防等多个子系统，经过监控系统对全部系统完成统筹管理，简化设计和树立流程，可靠的UPS电源配电系统，不时为IT设备保驾护航，同时配置了精密制冷系统，保证IT设备运转正常，搭配动环监控系统实时监控设备工作状态。一体化机柜采用全密封设计，能应用在多种恶劣室内环境中，无需单独设置机房，针对特殊站点可选用综合机柜，设备及电池置于同一柜体中，各设备分别工作，各区单独温控，在此基础上还可开展OCC业务，不用再单独选址建设相关站点，业务也可相互关联深度融合。 一体化机柜优势是什么? (1) 相对于传统机房，一体化机房结构更简单，工厂预验证测试相比现场施工建设更加规范、安全可靠；全密封设计杜绝外界空气尘埃及腐蚀性气体对IT设备的危害；动环监控系统全方位监控基础设施，及时告警异常状况，安全无忧。 (2) 更省时省力建站，产品化的模块化设计让现场一天内即可完成安装交付，相比传统建设模式快2倍以上。 (3) 更小的占地面积，单柜占地面积最小仅3.85㎡，封闭式设计，环境适应能力强，不需要装修、地板等配套工程，有效降低建站成本，全封闭式制冷提升整机能效，使总体拥有成本显著下降。 (4) 更好的管理，一站式售后服务能及时处理各类设备故障问题，省时省心；标配动环监控系统，可本地、远程监控管理，更可多网点接入上层管理平台统一监管，多样化选择支持。 点击下载产品手册 相关产品 1/16 绝缘耐压固定装置（金具） 钣金 1/4 综合机柜 钣金 1/14 光缆终端盒 钣金 1/2 移动智慧厕所 钣金

产品详情 全部 通信 终端和服务器 通信 GJS03-M2AX-A8-24~96C-N08(GP241) 帽式光缆接头盒, M2 该产品适用于室外光缆架空、管道等直通接续和分歧接续，光缆满足多分歧2进8出光缆端口管理。本产品具有高强度机械性能、高密封性能、耐腐蚀性强、耐候性优异等特点，可机械重复开启，可维护性高；结构布局合理，施工操作简单快捷。 应用场景 室外架空、管道等普通光缆接头接续，可用于城区或城乡普通光纤网络接续保护。 性能特点： 1、壳体采用优质工程塑料注塑工艺生产、添加有抗紫外线、耐老化助剂，机械强度高； 2、盒体采用单端进出光缆设计结构、便于架空挂杆等安装且筒体可快速开启进行检修和维护；开启盒体无须工具； 3、壳体与底部采用硅橡胶密封圈、光缆口利用耐温热缩管密封，气密性良好； 4、盒体具备电气断开或连通功能，可选配气嘴； 5、体积小巧，在管道或狭小空间更加适用； 6、多分歧结构设计，具有2进8出多光缆管理； 7、防白蚁、耐酸碱油、抗极寒和高温环境需订货单独说明。 技术参数 1、适应环境温度：-40℃~+65℃。 2、大气压力：70~106Kpa。 3、轴向拉力：〉1000N/1min以上。 4、压扁：盒内充入40±5kpa气压，应能承受2000N/100mm横向均布压力，加力时间不小于1ｍｉｎ，试验后接头盒不漏气、无变形、无损伤。 5、冲击：光缆接头盒应能承受落高1m、钢球质量1.6Kg，冲击次数为3次的冲击。 6、弯曲：光缆接头盒与光缆接合处应能承受弯曲张力负荷为150N、弯曲角度±45°的10个循环的弯曲。 7、扭转：光缆接头盒应能承受扭矩不小于50N·m，扭转角度±90°，共10次循环的扭转。 8、跌落：光缆接头盒应能承受2.2m高度3次的跌落，试验后接头盒不漏气、无变形、无损伤。 9、抗拉力：〉2000N/10cm2压力，时间1min。 10、震动：接头盒承受振动频率为10Hz、振幅为±3mm、振动次数为106的振动，其光纤附加损耗变化值不超过0.2dB; 11、温度循环：-40℃~+65℃，内部气压40(+5)Kpa,循环次数10次， 常温后气压下降不超过5kpa。 12、光纤曲率半径>30mm,光纤熔接盘附加衰耗≤0.01dB。 施工常用工具 十字改刀、热风机或喷枪、锯工、卷尺。 参数表 型号：GJS03-M2AX-A8-24~96C-N08(GP241) 盒体材质：PP 适应光缆直径椭圆孔：10-25mm；小孔：6-11mm 入缆口数：2+8 熔纤盘最大容量(芯）：24 最大熔接芯数(芯）：96 光纤余纤收容装置：是 密封方式：机械+热缩密封 光纤成端类型及数量：--- 产品使用环境：架空、管道、地埋 点击下载产品手册 相关产品 1/4 GJS03-M2AX-A8-144C（GP1418） 帽式光缆接头盒, M2 1/4 GJS03-M2AX-A8-24~96C-W21(GP1402) 帽式光缆接头盒, M2 1/4 GJS03-M2AX-A8，SC-24 24~72C-D（GP253） 帽式光缆接头盒, M2 1/4 GJS03-M2AX-A8-24~96C(GP206) 帽式光缆接头盒, M2

产品详情 全部 通信 终端和服务器 Terminal and Server HD Face Matching Network Camera MJ-EBF401-PI AI class camera Key selling points (1) 30fps live image output at 2 megapixels (2) Adopt the latest standard H.265+ video compression technology (3) Embedded intelligent deep learning face algorithm, extracting target features by itself (4) National standard products after various strict tests Each main parameter index Product key parameters 点击下载产品手册 相关产品

产品详情 全部 通信 终端和服务器 Telecommunication GJS03-M1AX-A8-24-96C-N08(GP218) Dome Fiber Optic Splice Closure, M 1 The product is suitable for outdoor optical cable overhead, pipeline and other straight-through splicing and divergence splicing, optical cable to meet the multi-divergence 2 into 8 out optical cable port management. The product has high strength mechanical performance, high sealing performance, strong corrosion resistance, excellent weather resistance, etc., can be mechanically repeated to open, high maintainability; reasonable structure layout, simple and quick construction operation. Application Scenario Outdoor overhead, pipeline, direct buried and other common fiber optic cable joint splicing, can be used for urban or urban and rural common fiber optic network splicing protection. Performance characteristics 1、The shell is produced by injection molding process of high-quality engineering plastics, with anti-UV and anti-aging additives, high mechanical strength; 2、The box body adopts single-ended in and out of the optical cable design structure, easy to install overhead hanging rods and other barrels can be quickly opened for maintenance and repair; no tools are required to open the box body; 3、the shell and the bottom with silicone rubber sealing ring, optical cable mouth using temperature-resistant heat-shrinkable tube sealing, good airtightness; 4、Box with electrical disconnection or connection function, optional air nozzle; 5、compact size, more suitable in the pipeline or narrow space; 6、Multi-divergent structure design with 2-in and 8-out multi-optical cable management; 7、termite resistance, acid and alkali resistant oil, resistance to extreme cold and high temperature environment need to order separate instructions. Technical parameters or parameters table 1、Adapted to the ambient temperature: -40℃~+65℃. 2、Atmospheric pressure: 70~106Kpa. 3、Axial tension: 〉1000N/1min or more. 4、flattening: the box is filled with 40 ± 5kpa air pressure, should be able to withstand 2000N/100mm lateral uniform pressure, the force time is not less than 1min, after the test joint box does not leak, no deformation, no damage. 5、impact: fiber optic splice box should be able to withstand a drop height of 1m, the mass of the steel ball 1.6Kg, the number of impacts for 3 times the impact. 6、bending: fiber optic splice box and fiber optic cable joints should be able to withstand bending tension load of 150N, bending angle ± 45 ° of 10 cycles of bending. 7、torsion: fiber optic splice box should be able to withstand a torque of not less than 50N-m, torsion angle ± 90 °, a total of 10 cycles of twisting. 8、Drop: The fiber optic cable connector box should be able to withstand 3 drops at a height of 2.2m, and after the test, the connector box should not leak, no deformation, no damage. 9、tensile strength: 〉2000N/10cm2 pressure, time 1min. 10、vibration: splice box to withstand vibration frequency of 10Hz, amplitude of ± 3mm, the number of vibration for 106 vibration, the fiber additional loss change value does not exceed 0.2dB. 11、Temperature cycle: -40℃~+65℃, internal air pressure 40(+5)Kpa, 10 times cycle, air pressure drop not more than 5kpa after room temperature. 12、fiber radius of curvature > 30mm, fiber fusion tray additional attenuation ≤ 0.01dB. Commonly used tools for construction cross cutters, heaters or spray guns, sawyers, tape measures. Parameter table Model: GJS03-M1AX-A8-24-96C-N08(GP218) Box material: PP Adapt to the diameter of fiber optic cable oval hole: 10-25mm; small hole: 6-11mm Number of cable entry ports: 2+8 Maximum capacity of fusion fiber tray (core): 24 Maximum number of fusion cores (cores): 96 Fiber optic remnant intake device is Sealing method: mechanical + heat shrink seal Fiber into the end type and number: -- Product use environment: overhead, pipeline, buried 点击下载产品手册 相关产品 1/3 GJS03-M1AX-A8-144C-W30(GP1416) Dome Fiber Optic Splice Closure, M 1 1/3 GJS03-M1AX-A8,SC-24 24-72C-D(GP297) Dome Fiber Optic Splice Closure, M 1 1/4 GJS03-M1AX-A8-24~96C(GP204) Dome Fiber Optic Splice Closure, M 1 1/3 GJSO3-M1AX-144C-SRZJ14(GP1444) Dome Fiber Optic Splice Closure, M 1